CX-Series Amps reach massive power levels thanks to an optimized circuit layout and the highest-grade internal components. Highly efficient heat sinks keep the amp cool with a sophisticated new look. Mono amps offer an optional remote level control to adjust your bass right from the dash.
Efficient Class-D amplifier
Three-second turn-on/off delay to eliminate unwanted interference
Variable 12dB crossovers provides control to dial in perfect sound
KickEQ™ 6dB variable bass boost for those additional low frequencies
24dB subsonic filter for protection from potentially damaging frequencies
FIT+™ (Fail-safe Integration Technology-PLUS) means it works with nearly every radio
Accepts up to 40-volt input signal
Small footprint for easier installation
Compatible with CXARC Remote Bass Control
Vertical mounting hardware included for another unique look
The CXA1800.1 Mono Amplifier is built for big bass in a sleek, yet affordable package. Using a Class-D power package and FIT+™ (Fail-safe Integration Technology-PLUS) for superior dependability, this amp features a variable bass boost with KickEQ™, giving you as much as a 6dB of extra bump. From your dash, a simple turn of the optional CXARC Remote Bass Controller (sold separately) increases your output to fit your choice of music.
CX-Series Amplifiers accept up to 40 volts (400 watts) of speaker-level input signal. This kind of flexibility both makes line-out converters unnecessary and optimizes your sound quality at the same time!
A powerful 12dB crossover and 24dB subsonic filter is included, letting you quickly tune your system to perfection. Use the full range outputs to expand your system with other bass amps, or add a full range amp to complete your system.
This CX-Series Amplifier delivers as much as 1,800 watts into one bass channel. See below for more details.
MODEL CXA1800.1 Power (watts/ch) 4 Ohm900x1 Power (watts/ch) 2 Ohm1800x1 Power (watts/ch) 1 Ohm1800x1 +/-10% CXRC Remote Bass Capable (sold sep.)yes Dimensions (in, cm): (all models 2-3/8, 5.9H x 6-3/4, 17W x ...L) 14-3/8, 36.4 Frequency Response (Hz):25-200Hz
Input Sensitivity:125mV–5V (Low Level) 1V–40V (High Level) White Paper46CXA18001-wp.pdf Signal-to-Noise Ratio:95dB Active Crossover:Variable Lo-pass 50Hz–200Hz, 12dB/octave Subsonic Filter:25Hz @24dB/octave KickEQ™ BoostVariable 0-6dB @40Hz Warranty When purchased from an Authorized KICKER Dealer or kicker.com, KICKER warrants this product to be free from defects in material and workmanship under normal use for a period of TWO (2) YEARS from date of original purchase.
If you have two mono amps or powered subwoofers, check out the DBRC Remote for controlling both from the same knob.
CX-Series Amps reach massive power levels thanks to an optimized circuit layout and the highest-grade internal components. Highly efficient heat sinks keep the amp cool with a sophisticated new look. Mono amps offer an optional remote level control to adjust your bass right from the dash.
Efficient Class-D amplifier
Three-second turn-on/off delay to eliminate unwanted interference
Variable 12dB crossovers provides control to dial in perfect sound
KickEQ™ 6dB variable bass boost for those additional low frequencies
24dB subsonic filter for protection from potentially damaging frequencies
FIT+™ (Fail-safe Integration Technology-PLUS) means it works with nearly every radio
Accepts up to 40-volt input signal
Small footprint for easier installation
Compatible with CXARC Remote Bass Control
Vertical mounting hardware included for another unique look
The CXA1800.1 Mono Amplifier is built for big bass in a sleek, yet affordable package. Using a Class-D power package and FIT+™ (Fail-safe Integration Technology-PLUS) for superior dependability, this amp features a variable bass boost with KickEQ™, giving you as much as a 6dB of extra bump. From your dash, a simple turn of the optional CXARC Remote Bass Controller (sold separately) increases your output to fit your choice of music.
CX-Series Amplifiers accept up to 40 volts (400 watts) of speaker-level input signal. This kind of flexibility both makes line-out converters unnecessary and optimizes your sound quality at the same time!
A powerful 12dB crossover and 24dB subsonic filter is included, letting you quickly tune your system to perfection. Use the full range outputs to expand your system with other bass amps, or add a full range amp to complete your system.
This CX-Series Amplifier delivers as much as 1,800 watts into one bass channel. See below for more details.
MODEL CXA1800.1 Power (watts/ch) 4 Ohm900x1 Power (watts/ch) 2 Ohm1800x1 Power (watts/ch) 1 Ohm1800x1 +/-10% CXRC Remote Bass Capable (sold sep.)yes Dimensions (in, cm): (all models 2-3/8, 5.9H x 6-3/4, 17W x ...L) 14-3/8, 36.4 Frequency Response (Hz):25-200Hz
Input Sensitivity:125mV–5V (Low Level) 1V–40V (High Level) White Paper46CXA18001-wp.pdf Signal-to-Noise Ratio:95dB Active Crossover:Variable Lo-pass 50Hz–200Hz, 12dB/octave Subsonic Filter:25Hz @24dB/octave KickEQ™ BoostVariable 0-6dB @40Hz Warranty When purchased from an Authorized KICKER Dealer or kicker.com, KICKER warrants this product to be free from defects in material and workmanship under normal use for a period of TWO (2) YEARS from date of original purchase.
If you have two mono amps or powered subwoofers, check out the DBRC Remote for controlling both from the same knob.
