LP7-2R 2-channel Adjustable High Power Differential L.O.C. with Turn-On and Remote

Overview

• Accepts both high level and low level input
• Single Stereo Gain controls
• Ultra compact housing
• High Power - conservatively rated @ 55 watts per channel
• Full 20Hz to 20kHz frequency response (+/- 1.5 dB)
• Single harness design
• Bass knob can be taken apart for flush mounting

One of Audio Pros personal favorites for quick signal correction in most cars.

SIGNAL RESTORATION

In the pursuit to get the best sound possible from your stereo system that features both factory and aftermarket gear, KEYLOC’s patent-pending KEY™ algorithm automatically detects and analyzes crossovers, EQ, time delay, and all-pass filters present, and then it will level-match the left and right audio channels. Once analyzed, it corrects these various filters to give you the smoothest frequency response possible, giving you a clean, uncolored audio signal for your aftermarket gear.

HEAR IT YOURSELF

To hear what you’ve done, cycle the EQ correction on and off with a single push of the KEYLOC’s “KEY” button – hear the before and after! Additionally, if KEYLOC detects any all-pass filters or factory time delay, you can choose to defeat the correction (from the menu) and keep the imaging of the factory source unit. By keeping the correction filter active, KEYLOC will counteract either of these factory effects so you can use an external audio processor to dial in a one-seat tune for the ultimate sound experience.

IT’S FIT

Using KICKER’s FIT 2+™ (Fail-safe Integration Technology), KEYLOC has the most versatile input sensitivity in the car-audio aftermarket. Ranging from 125 mV-10V (low level) with 60-Ohm smart load, or 1V-40V (high level), KEYLOC is prepared to work with nearly every vehicle on the road today.

RMS Output/Channel (1kHz @ 14.4V, ≤ 1% THD+N)10VFrequency Response (Hz)20–20kSignal-to-Noise Ratio>100dB, A-weighted, re: rated powerInput SensitivityLo: 125mV–10V (60Ω smart radio load)
Hi: 1V–40V

Length [in, cm]5-1/2, 14Height [in, cm]1-3/8, 3.5Width [in, cm]2-3/4, 7.1

Overview

• Supports up to four amplifiers
• Fused Power Inputs - 2 x 0 AWG + 1 x 4 AWG
• Fused Power Outputs - 1 x 0 AWG + 3 x 4 AWG
• Ground Input/Outputs - 2 x 0 AWG + 3 x 4 AWG
• Accepts Mini-ANL Fuses
• Solid Brass Construction
• Satin Nickel Finish
• Fuse Lock System

MINI ANL FUSE. 1 FUSE

Overview

• Inline Fuse holder for Mini ANL Fuse
• Accepts 4 or 8 AWG power wire
• Includes 60 Amp Illuminated Mini-ANL Fuse
• Solid Brass Construction
• Satin Nickel Finish
• 6 Stage Water Protection
• Grip Tip Set Screws
• Fuse Lock

Overview

• Supports up to two amplifiers
• Fused Power Inputs - 1 x 0/4 AWG + 1 x 4 AWG
• Fused Power Outputs - 2 x 4 AWG
• Accepts Mini-ANL Fuses
• Solid Brass Construction
• Satin Nickel Finish
• Fuse Lock System

GM Side Post Long

Overview

• Connects to Positive or Negative GM Side Post Battery Terminal
• Solid Brass Construction
• Satin Nickel Finish
• Includes lock washer for secure connection

GM Side Post

Overview

• Connects to Positive or Negative GM Side Post Battery Terminal
• Solid Brass Construction
• Satin Nickel Finish
• Includes lock washer for secure connection
• Often used as ground lug in 'star ground' systems

Chevy/GMC-Specific Dual 12” L7T 2-

Ohm Enclosure

For Your Chevy or GMC

• Requires amp and handles 1,200 watts RMS

• Single 2-Ohm terminal

• Dual KICKER Solo-Baric L7T Square Subwoofers

• Thick black carpeting

• MDF construction and heavy internal bracing

Made from thick MDF and formed specifically to fit every contour of your Silverado or Sierra, this custom enclosure features a pair of down-firing L7T 12-inch subwoofers with a monstrous 1,200-watts of recommended power. See details below.

Audio Pros suggests 10-15 hours of break in playing time

Features:

sealed enclosure with two 10" L7T square shallow-mount subwoofers

fits under the rear seat of select 2002-up RAM Crew Cab and Quad Cab trucks

3/4" MDF construction with black carpet covering

total power handling: 1000 watts RMS

single wiring terminal with 2 ohms impedance

frequency response: 25-100 Hz

sensitivity: 84.1 dB

dimensions: 58.4"W x 7.56"H x 16.42"D

Dual L7T Truck-Specific Enclosures provide impactful bass and install under the back seat to retain cab space and legroom.

Fits*:
RAM 1500 Quad Cab (2002-2018)
RAM 1500 Crew Cab (2009-2018)
RAM 2500/3500 Quad Cab (2003-2026)
RAM 2500/3500 Crew Cab (2009-2026)
RAM 1500 Classic Quad/Crew Cab (2019-2024)

*Items such as inverters, storage compartments, spare tire tools or floor mats may require removal.

Audio Pros suggests 10-15 hours of break in playing time

Dual L7T Truck-Specific Enclosures provide impactful bass and install under the back seat to retain cab space and legroom.

Fits*:
Ford F-150 Crew Cab (2009-newer)
Ford SuperDuty Crew Cab (2017-newer)

• Requires amp and handles 1,000 watts RMS

• Single 2-Ohm terminal

• Dual KICKER Solo-Baric L7T Square Subwoofers

• Thick black carpeting

• MDF construction and heavy internal bracing

• FREQUENCY RESPONSE (Hz):25-100
  
  Made from thick MDF and formed specifically to fit every contour of your F-150 and SuperDuty, this custom enclosure features a pair of down-firing L7T 10-inch subwoofers with a monstrous 1,000-watts of recommended power. 

*Items such as inverters, storage compartments, spare tire tools or floor mats may require removal.

Audio Pros suggests 10-15 hours of break in playing time.

TUBE POWER

Ultra-deep and surprisingly loud, TB subs mount in your trunk or your truck with equal ease. You get the bump you want without losing the space you need.

Features:

• Two Ohm Speaker

• Thick ABS Tube Construction

• Flexible Horizontal or Vertical Mounting System

• Spring-Loaded Speaker Terminals

• CompR Woofer and Reflex Sub

• Ceramic Magnet

• Advanced Heat Management System

• Signature Double Red Stitching

• Grilles included

This TB Eight-Inch Tube Speaker works best with 300 watts of recommended power Impedance (ohms) 2 Recommended Amplifier Power (watts RMS) 300 Peak Power 600 (watts, per ANSI/CTA-2031-A) Sensitivity (dB 1w/1m) 84.4 Tuning Frequency [Hz]31

Single TL7T 2-Ohm Enclosure

KICKER Sub Enclosures are the perfect solution when space is at a premium. Covered in stylish black carpeting and built with thick MDF construction, these sturdy enclosures take some serious power, yet easily fit under your seat.

Features:

• Genuine KICKER L7T Subwoofer Included

• Angled Design for Excellent Fit

• Heavy Internal Bracing

• Single 2-Ohm Terminal

• Easy to Install and Wire

• Thick Black Carpeting

• Rounded Corners

• Embroidered KICKER Logo

• Thick MDF Construction

• 8” 350 WATTS RMS

• 10” 500 WATTS RMS

• 12” 600 WATTS RMS

• Music Mix

  Up to 5 Bluetooth® devices can be paired to the receiver at the same time. You can enjoy audio streaming just by switching the devices with your friends or family.

• Dual Phone Connection

  While you are connected through Bluetooth, with a touch of a button you can switch between two phones.

• Remote App

  A smartphone application can control most basic functions of the receiver over the Bluetooth connection of the paired phone (iPhone or Android).

• Graphic EQ / Digital Time Alignment

  13-Band equalizer and DTA gives optimal tuning enhancements for listeners.

• Drive EQ

  Boosts specific frequencies in the audio signal to overcome the negative impact of road noise.

• Variable Color Illumination

  Bright variable color LEDs can be adjusted to match any
  color dash lighting.

• Short Chassis

  With receivers shorter in depth than any of our previous models, installation is made easier in a wider range of cars.

• Music Mix

  Up to 5 Bluetooth® devices can be paired to the receiver at the same time. You can enjoy audio streaming just by switching the devices with your friends or family.

• Dual Phone Connection

  While you are connected through Bluetooth, with a touch of a button you can switch between two phones.

• Remote App

  A smartphone application can control most basic functions of the receiver over the Bluetooth connection of the paired phone (iPhone or Android).

• Graphic EQ / Digital Time Alignment

  13-Band equalizer and DTA gives optimal tuning enhancements for listeners.

• Drive EQ

  Boosts specific frequencies in the audio signal to overcome the negative impact of road noise.

• FLAC Supported

  Compatible with various audio file formats from FLAC and WAV, to MP3, WMA and AAC.

• 6.8" WVGA Monitor with Capacitive Touch Panel

• Apple CarPlay® & Android Auto™ Ready

• USB Mirroring for Android

• 13 Band EQ & Digital Time Alignment

• 3 Camera Inputs

• Built-in HD Radio Tuner

• Short Chassis

• 3 Preouts 5.0V

HDMI Input

Display your smartphone screen or other device via an HDMI cable (and third party adapter as applicable) on the monitor. KCA-HD200 optional HDMI cable sold separately.

3 Camera Inputs

To enable a smarter driving experience, receivers featuring 3 camera inputs allow for the utmost in convenience, flexibility, and safety. With 3 camera inputs, you can connect a front camera, a rear camera and a third camera which can be used for trailers or caravans. Alternatively, 3 camera inputs support several other configurations, including the connection of 2 blind spot cameras and a reverse camera. Camera switching is available using on screen controls and manual switchers. A KENWOOD CA-C3AV Video AV Input cable (sold separately) is required to use the 3rd camera input.

ENHANCED VEHICLE INTEGRATION

Enhance your vehicle integration with the iDatalink Maestro RR/RR2 (sold separately). This system allows you to retain your factory steering wheel audio controls, factory amplifier, and secondary displays. Additionally, it can display crucial vehicle information, such as performance data, climate controls, and battery voltage, when connected to compatible vehicles. For added convenience, radar detector information can be shown on the screen when paired with a compatible K40 radar detector system (sold separately). With the iDatalink Maestro RR2, you can also integrate an Escort radar detector system (sold separately) for a seamless driving experience.

Video CodecPlayable up toMPEG41920 × 1080pH.2641920 × 1080pMKV1920 × 1080pWMV1920 × 1080p

Music CodecPlayable up toFLAC～192kHz / ～24bitWAV～192kHz / ～24bit

• Wireless Mirroring

  Solution for seamlessly displaying and controlling your smartphone apps on a screen without cables on select smartphone devices.

• HD (1280 x 720)

  The High Definition display reproduces approximately 2.4 times higher resolution than the conventional WVGA display.

• HD Rear Camera Input

  HD Rear Camera (CMOS-740HD) can be connected for High Definition viewing.

• Parking Guidelines

  Parking guidelines (requires installation of compatible backup camera) that enhance the effectiveness of a backup camera.

• 2.1A Rapid Charge

  Rapidly charge your compatible smartphone with the USB port, up to a maximum of 2.1A

• 13 Band Graphic EQ

  You can adjust the level of each frequency band and create an original equalizer curve to match the in-car environment or your specific preference.

• Digital Time Alignment

  Virtually adjusts your listening position to the centre of the car.

• Dual Phone Connection

  While you are connected through Bluetooth, with a touch of a button you can switch between two phones.

• 6.8" WSVGA Display with Capacitive Touch Panel

• Wired and Wireless Apple CarPlay®

• Android Auto™ & Android Auto™ Wireless

• Wireless Mirroring for iPhone / Android

• iDatalink Maestro Ready

• 13 Band EQ & Digital Time Alignment

• Rear View Camera Input with Parking Guidelines

• Built-in Bluetooth

• 2 Preouts 2.5V & Subwoofer Out

• Short Chassis

• • 7” Capacitive Touchscreen

• • Apple CarPlay® & Android Auto™ (Wired, Wireless)

• • SiriusXM-Ready®

• • iDatalink® Maestro Compatible

• • True Double-DIN Fit

• • Built-In DSP with 13-Band EQ, Crossover Settings and Time Alignment

• • High Resolution Audio Playback- FLAC

• • Multicolor Illumination

• • RDS/RBDS Tuner

• • Switchable US/LATAM/EU Tuner Frequencies

• • Push-To-Talk

• • Built-in Programmable Steering Wheel Controls*

• • Steering Wheel Interface Ready**

• • This unit is equipped with a programmable Steering Wheel Control Learning function for vehicles with analog steering control. Not compatible with all vehicles. *Steering Wheel Interface Ready (Interface sold separately).

Enhanced in-car connectivity and sound customization

Enjoy smooth and simple control for every journey. An anti-glare 6.95 in (17.6 cm) diagonal touchscreen and updated interface design give you intuitive control over music, communications and more. Expanded wireless connectivity, plus time-alignment and a 14-band EQ, allow for even more personalization and the perfect in-car audio experience.

Anti-glare sleek touchscreen

The anti-glare 6.95-in (17.6-cm) touchscreen and clean interface design ensure a stylish and efficient user experience.

Wireless smartphone conversion

Thanks to a Wi-Fi connection to your smartphone, together with the supplied GPS antenna, you can use voice control to navigate, communicate and play music on the road even with your device in the pocket. ²

Apple CarPlay

Easily access the iPhone features you know and love, just by talking to Siri. Music, maps, phone calls and messages are all under your control. ³ 

Android Auto™

Use commands to dictate messages, take phone calls or get help from Google Maps. You can even control music playback just by talking. Wireless connection available depending on your smartphone, country or region. ⁴

iDatalink® Maestro® connects your vehicle’s onboard computer with car audio, making it work as a customized display for your car’s factory-equipped functions and features. It provides a seamless interface with factory infotainment and vehicle information such as air conditioning, performance and safety. Simply connect an iDatalink® Maestro® RR / RR2 by Automotive Data Solutions. It’s a new way to connect car audio to your vehicle while retaining and improving the functions of the original equipment. ⁵

LDAC for exceptional sound quality

Enjoy the convenience of Bluetooth® wireless audio and exceptional sound quality thanks to LDAC. Connect compatible devices to stream audio at 96 kHz / 24-bit sampling with bitrates up to 3x higher (990 kbps) than conventional Bluetooth®.

Sound customization

The built-in DSP offers sound processing and time alignment—down to a remarkable 1 cm for each of the five addressable channels (four speakers + subwoofer via pre-out). A 14-band EQ lets you adjust the overall sound to your music or taste. Together with the three-zone crossover, you can dial in the perfect match of front, rear and subwoofers.

Simple button controls with improved design

The new button design features large keys to seamlessly fit with the sleek display. Access volume, source, sound settings and voice control, for safe and easy operation on the road.

Rear-view camera-ready

Got a rear camera installed? You can view its feed through the screen, along with customizable guidelines to help you reverse safely.

Updated User Interface with customizable wallpaper

Customize the new ergonomic user interface to suit your car interior or taste, with four preset and two manual wallpaper colour settings.

‍ ‍Class D 4-Channel Power Amplifier

• Max Power 600W

• RMS 50W x4 (4Ω)

• RMS 75W x4 (2Ω)

• RMS 150W x 2 (Bridged)

• Size (inch) (W) 8-3/8" x (H) 2-1/16" x (D) 5-7/8"

• High-Resolution Audio Certified

• Variable High & Low Pass Filter

• Bass Boost

• • Max Power 1000W

  • RMS 300W (4Ω)

  • RMS 500W (2Ω)

  • Size (inch) (W) 8-3/8" x (H) 2-1/16" x (D) 5-7/8"

  • Variable Low Pass Filter

  • Bass Boost

  • Infrasonic Filter

  • Wired Remote Included

Class D 5-Channel Power Amplifier

• Max Power 1600W

• RMS 50W x4 + 300W (4Ω)

• RMS 75W x4 + 500W (2Ω)

• RMS 150W x 2 (Bridged) + 300W (4Ω)

• Size (inch) (W) 9-3/4" x (H) 2-1/16" x (D) 6-5/8"

• High-Resolution Audio Certified

• Variable High & Low Pass Filter

• Bass Boost

• Wired Remote Included

Cta-2006 Compliant

Number of Channels

1

Total Power
(Sum of Rated Power)

500 Watts

Rated Power
(RMS Continuous Power)

300 Watts x 1 @ 4Ω
500 Watts x 1 @ 2Ω

Dynamic Power
(PVC/PowerCube®)

350 Watts x 1 @ 4Ω
590 Watts x 1 @ 2Ω

Bridgeable

No

Frequency Response

20 Hz - 250 Hz

Input Sensitivity

Low-Level: 150 mV - 4 V
High-Level: 450 mV - 12 V

Circuit Topology Class

Class-D

Efficiency (average)

Total Harmonic Distortion (THD+Noise)

4Ω: <1.0%
2Ω: <1.0%

Signal Input

Low-Level: 2 RCA
High-Level: 4-Pin Molex

Signal Output

Low-Level: 2 RCA
(Pass-Thru active with RCA or Hi-Level input)

Tone Controls

0 to +18 dB @ 45 Hz

Crossover Controls

Low-Pass:
50 Hz - 250 Hz @ 12dB/Octave Butterworth

Infrasonic:
15 Hz - 40 Hz @ 12dB/Octave Butterworth

Remote Controls

Yes

Visual Indicators

Power/Protect
C.L.E.A.N. In
C.L.E.A.N. Out

Power Wire Gauge

4 AWG

Power Input Connector

Compression Terminal Block

Speaker Wire Gauge

8 AWG

Speaker Output Connector

Compression Terminal Block

Cooling

Convection

Heatsink

Operating Voltage

9 - 16 VDC

Recommended Fuse
(not included)

80 A

Average Current Draw (13.8V Music)

Max. Current Draw (13.8V Sinewave)

52 A

Suggested Alternator

Included In The Box

Dimensions (H x W x D)

1.9" x 6.8" x 8.5"
(4.9 cm x 17.3 cm x 21.5 cm)

Cta-2006 Compliant

Number of Channels

1

Total Power
(Sum of Rated Power)

250 Watts

Rated Power
(RMS Continuous Power)

160 Watts x 1 @ 4Ω
250 Watts x 1 @ 2Ω

Dynamic Power
(PVC/PowerCube®)

209 Watts x 1 @ 4Ω
328 Watts x 1 @ 2Ω

Bridgeable

No

Frequency Response

20 Hz - 250 Hz

Input Sensitivity

Low-Level: 150 mV - 4 V
High-Level: 450 mV - 12 V

Circuit Topology Class

Class-D

Efficiency (average)

Total Harmonic Distortion (THD+Noise)

4Ω: <1.0%
2Ω: <1.0%

Signal Input

Low-Level: 2 RCA
High-Level: 4-Pin Molex

Signal Output

Low-Level: 2 RCA
(Pass-Thru active with RCA or Hi-Level input)

Tone Controls

0 to +18 dB @ 45 Hz

Crossover Controls

Low-Pass:
50 Hz - 250 Hz @ 12dB/Octave Butterworth

Infrasonic:
15 Hz - 40 Hz @ 12dB/Octave Butterworth

Remote Controls

Yes

Visual Indicators

Power/Protect
C.L.E.A.N. In
C.L.E.A.N. Out

Power Wire Gauge

4 AWG

Power Input Connector

Compression Terminal Block

Speaker Wire Gauge

8 AWG

Speaker Output Connector

Compression Terminal Block

Cooling

Convection

Heatsink

Operating Voltage

9 - 16 VDC

Recommended Fuse
(not included)

50 A

Average Current Draw (13.8V Music)

Max. Current Draw (13.8V Sinewave)

30 V

Suggested Alternator

Included In The Box

Dimensions (H x W x D)

1.9" x 6.8" x 8.1"
(4.9 cm x 17.3 cm x 20.5 cm)

Cta-2006 Compliant

Number of Channels

5

Total Power
(Sum of Rated Power)

750 Watts

Rated Power
(RMS Continuous Power)

50 Watts x 4 + 200 Watts x 1 @ 4Ω
100 Watts x 4 + 350 Watts x 1 @ 2Ω
200 Watts x 2 + N/A @ 4Ω Bridged/Mono

Dynamic Power
(PVC/PowerCube®)

70 Watts x 4 + 241 Watts x 1 @ 4Ω
114 Watts x 4 + 426 Watts x 1 @ 2Ω
234 Watts x 2 + N/A @ 4Ω Bridged/Mono

Bridgeable

Yes

Frequency Response

20 Hz - 20 kHz

Input Sensitivity

Low-Level: 150 mV - 4 V
High-Level: 450 mV - 12 V

Circuit Topology Class

Class-D

Efficiency (average)

Total Harmonic Distortion (THD+Noise)

Front/Rear 4Ω: <1.0%
Front/Rear 2Ω: <1.0%
Sub 4Ω: <1.0%
Sub 2Ω: <1.0%

Signal Input

Front Low-Level: 2 RCA
Front High-Level: 4-Pin Molex
Rear Low-Level: 2 RCA
Rear High-Level: 4-Pin Molex
Sub Low-Level: 2 RCA
Sub High-Level: 4-Pin Molex

Input Switch: 2/4/5 Input
(works for RCA/Hi-Level inputs)

Signal Output

N/A

Tone Controls

0 to +18 dB @ 45 Hz

Crossover Controls

Front High-Pass:
50 Hz - 250 Hz @ 12dB/Octave Butterworth

Front Low-Pass:
50 Hz - 250 Hz @ 12dB/Octave Butterworth

Rear High-Pass:
50 Hz - 250 Hz @ 12dB/Octave Butterworth

Rear Low-Pass:
50 Hz - 250 Hz @ 12dB/Octave Butterworth

Sub Low-Pass:
50 Hz - 250 Hz @ 12dB/Octave Butterworth

Sub Infrasonic:
15 Hz - 40 Hz @ 12dB/Octave Butterworth

Remote Controls

Yes

Visual Indicators

Power/Protect
C.L.E.A.N. In
C.L.E.A.N. Out (front)
C.L.E.A.N. Out (rear)
C.L.E.A.N. Out (sub)

Power Wire Gauge

4 AWG

Power Input Connector

Compression Terminal Block

Speaker Wire Gauge

8 AWG

Speaker Output Connector

Compression Terminal Block

Cooling

Convection

Heatsink

Operating Voltage

9 - 16 VDC

Recommended Fuse
(not included)

120 A

Average Current Draw (13.8V Music)

Max. Current Draw (13.8V Sinewave)

71 A

Suggested Alternator

Included In The Box

Dimensions (H x W x D)

1.9" x 6.8" x 11.2"
(4.9 cm x 17.3 cm x 28.5 cm)

Cta-2006 Compliant

Number of Channels

1

Total Power
(Sum of Rated Power)

750 Watts

Rated Power
(RMS Continuous Power)

250 Watts x 1 @ 4Ω
500 Watts x 1 @ 2Ω
750 Watts x 1 @ 1Ω

Dynamic Power
(PVC/PowerCube®)

300 Watts x 1 @ 4Ω
545 Watts x 1 @ 2Ω
830 Watts x 1 @ 1Ω

Bridgeable

No

Frequency Response

20 Hz - 250 Hz

Input Sensitivity

Low-Level: 150 mV - 4 V
High-Level: 450 mV - 12 V

Circuit Topology Class

Class-D

Efficiency (average)

Total Harmonic Distortion (THD+Noise)

4Ω: <1.0%
2Ω: <1.0%
1Ω: <1.0%

Signal Input

Low-Level: 2 RCA
High-Level: 4-Pin Molex

Signal Output

Low-Level: 2 RCA
(Pass-Thru active with RCA or Hi-Level input)

Tone Controls

0 to +18 dB @ 45 Hz

Crossover Controls

Low-Pass:
50 Hz - 250 Hz @ 12dB/Octave Butterworth

Infrasonic:
15 Hz - 40 Hz @ 12dB/Octave Butterworth

Remote Controls

Yes

Visual Indicators

Power/Protect
C.L.E.A.N. In
C.L.E.A.N. Out

Power Wire Gauge

4 AWG

Power Input Connector

Compression Terminal Block

Speaker Wire Gauge

8 AWG

Speaker Output Connector

Compression Terminal Block

Cooling

Convection

Heatsink

Operating Voltage

9 - 16 VDC

Recommended Fuse
(not included)

120 A

Average Current Draw (13.8V Music)

Max. Current Draw (13.8V Sinewave)

71 A

Suggested Alternator

Included In The Box

Dimensions (H x W x D)

1.9" x 6.8" x 10.1"
(4.9 cm x 17.3 cm x 25.5 cm)

If you need to quickly add bass to a system or want to alleviate the hassle of separate amplifiers and subwoofers, then the P300-12 is the right one for the job! The P300-12 features a Punch 12” subwoofer in a custom sealed enclosure and is powered by a mighty 300 Watt amplifier. The system is all-inclusive, so you only need to run power, ground and a signal from the source to get this baby moving. Features a durable exterior that resists scrapes and bumps while in the trunk or cargo area.

FEATURES AT A GLANCE

• "Closed-loop" design ensures optimum performance between woofer, amplifier and enclosure

• Built-in 0°/180° phase switch

• Separate low level and speaker level inputs

• Built-in adjustable bass boost EQ

• Adjustable 12db/Octave low pass crossover

• Detachable Power/Ground connector

• High-efficiency, low current design

• Thermal and over/under voltage protection

• Intelligent auto turn on/off function

• Remote bass level control included

• Proprietary high output woofer

• Constructed with 5/8" MDF

• Large AWG input terminals

• Covered with industrial heat activated vinyl

• 1 Year Warranty

• Dimensions
  Box (H x W x D)
  Wedge (H x W x D1 x D2)

  15 x 19.8 x D1 11 - D2 7 (in)
  38.1 x 50.29 x D1 27.94 - D2 17.78 (cm)

If you need to quickly add bass to a system or want to alleviate the hassle of separate amplifiers and subwoofers, then the P300-10 is the right one for the job! The P300-10 features a Punch 10” subwoofer in a custom sealed enclosure and is powered by a mighty 300 Watt amplifier. The system is all-inclusive, so you only need to run power, ground and a signal from the source to get this baby moving. Features a durable exterior that resists scrapes and bumps while in the trunk or cargo area.

FEATURES AT A GLANCE

• "Closed-loop" design ensures optimum performance between woofer, amplifier and enclosure

• Built-in 0°/180° phase switch

• Separate low level and speaker level inputs

• Built-in adjustable bass boost EQ

• Adjustable 12db/Octave low pass crossover

• Detachable Power/Ground connector

• High-efficiency, low current design

• Thermal and over/under voltage protection

• Intelligent auto turn on/off function

• Remote bass level control included

• Proprietary high output woofer

• Constructed with 5/8" MDF

• Large AWG input terminals

• Covered with industrial heat activated vinyl

• 1 Year Warranty

• Dimensions
  Box (H x W x D)
  Wedge (H x W x D1 x D2)

  13.3 x 18 x D1 8.9 - D2 5.9 (in)
  33.7 x 45.72 x D1 22.6 - D2 14.98 (cm)

  
  

The Punch 300-8P is a self-contained subwoofer enclosure with built-in amplifier. This "all in one" solution is great for systems that need extra Punch on the low-end of the frequency spectrum. The 8" high output subwoofer is impedance optimized for the built in 300-watt class-D amplifier that features a low-pass crossover, bass EQ and phase switch. The enclosure can be connected via speaker level inputs for connection to factory systems, or traditional line level inputs for aftermarket systems. It also features an intelligent auto turn-on/off circuit that eliminates the need for a separate turn-on wire. The enclosure itself is precision designed and constructed using MDF (Medium Density Fiberboard) for the best acoustical properties and covered with heat activated vinyl finish to resist marks.

FEATURES AT A GLANCE

• High-Efficiency, Low Current Amplifier Design

• Optimized 8" Low Impedance Woofer

• On Board Phase Switch

• 300 Watt Class-D Amplifier with Optimized "Closed Loop" Design

• Adjustable 12db/Octave low pass crossover

• Intelligent auto turn on/off function

• Quick Input Connections for Easy Removal

• On Board Adjustable Bass EQ

• Robust Power/Ground connections

• Remote bass level control included

• Precision Constructed MDF Enclosure with Heat Activated Vinyl Finish

• Separate low level and speaker level inputs

• Thermal and over/under voltage protection

• Slim Design For Truck Applications

• 1 Year Warranty

• Dimensions
  Box H x W x D
  Wedge H x W x D1 x D2

  11.4" x 17.6" x 5.6"
  289 mm x 448 mm 141 mm