CS Series CSS65

The CS-Series 6-1/2-inch Component Speakers are an outstanding factory upgrade.

Designed for easy installation in nearly any vehicle, CS-Series components include separate titanium tweeters and two-way crossovers with tweeter level control to let you customize your sound for the best sonic quality. The result is precise control with stunning musical realism.

Use the flush, angled or surface-mount tweeter pods to perfect your imaging and get a sophisticated look!

These CS-Series speakers work best with 100 watts of recommended power. See below for more details.

• Fits nearly every car made

• 12dB crossovers with a smaller footprint for easier installation

• Three-position tweeter switch for dialing in your highs

• EVC™ (Extended Voice Coil) technology help deliver remarkable bass response

• Titanium tweeter construction and neodymium magnets to reveal subtle details

• UV-treated poly-foam surround assists with precise linear excursion

• Phase plugs in the woofer cones eliminate any distortion

• Steel mesh grilles protect your drivers

• Three tweeter mounting options including flush, angled and surface pods

Specifications

Woofer Size | in [mm]6 1/2 [160]Tweeter Size | in [mm]3/4 [20]Dome MaterialTitaniumPeak Power (watts, per ANSI/CTA-2031-A)300Recommended Amplifier Power (watts RMS)100Effective Frequency Range | Hz35-21kWoofer Mounting Hole Diameter | in [mm]4 13/16 [123]

Woofer Bottom Mount Depth | in [mm]1 11/16 [43]Flush Mounting Tweeter Hole Diameter | in [mm]1 9/16 [40]Flush Mount Tweeter Depth | in [mm]9/16 [14.5]High Pass | dB, at Frequency | Hz12, 4000Low Pass | dB, at Frequency | Hz12, 4000High Frequency Output Attenuation | dB0, 3, & 6Bolt-Thru GrillesYesWarrantyWhen purchased from an Authorized KICKER Dealer or kicker.com, KICKER warrants this product to be free from defects in material and workmanship under normal use for a period of TWO (2) YEARS from date of original purchase.

CS Series CSS67

The CS-Series 6-3/4-inch Component Speakers are built for awesome sound that plays as long as the ride takes you.

CS-Series components include titanium tweeters and two-way crossovers. Easily customize your sound with a smooth 12dB slope and three-position tweeter adjustment switch (0dB/+3dB/+6dB). The optimized footprint means great sound with hassle-free installation, no matter where you mount it!

Mount the tweeter with the flush, angled or surface-mount tweeter pods, for outstanding imaging and a sophisticated look.

These CS-Series speakers work best with 100 watts of recommended power. See below for more details.

• Fits nearly every car made

• 12dB crossovers with a smaller footprint for easier installation

• Three-position tweeter switch for dialing in your highs

• EVC™ (Extended Voice Coil) technology help deliver remarkable bass response

• Titanium tweeter construction and neodymium magnets to reveal subtle details

• UV-treated poly-foam surround assists with precise linear excursion

• Phase plugs in the woofer cones eliminate any distortion

• Steel mesh grilles protect your drivers

• Three tweeter mounting options including flush, angled and surface pods

Specifications

Woofer Size | in [mm]6 3/4 [165]Tweeter Size | in [mm]3/4 [20]Dome MaterialTitaniumPeak Power (watts, per ANSI/CTA-2031-A)300Recommended Amplifier Power (watts RMS)100Effective Frequency Range | Hz35-21kWoofer Mounting Hole Diameter | in [mm]5 1/2 [140]

Woofer Bottom Mount Depth | in [mm]1 13/16 [47]Flush Mounting Tweeter Hole Diameter | in [mm]1 9/16 [40]Flush Mount Tweeter Depth | in [mm]9/16 [14.5]High Pass | dB, at Frequency | Hz12, 4000Low Pass | dB, at Frequency | Hz12, 4000High Frequency Output Attenuation | dB0, 3, & 6Bolt-Thru GrillesYesWarrantyWhen purchased from an Authorized KICKER Dealer or kicker.com, KICKER warrants this product to be free from defects in material and workmanship under normal use for a period of TWO (2) YEARS from date of original purchase.

CS Series CSS68

CS-Series 6x8-inch Component Speakers are the perfect factory upgrade when you have a separate woofer and tweeter.

CS-Series components include separate titanium tweeters and two-way crossovers with tweeter level control to let you customize your sound for the best sonic quality. The result is precise control with stunning musical realism. Use the flush, angled or surface-mount tweeter pods to perfect your imaging with a sophisticated new look.

These CS-Series speakers work best with 75 watts of recommended power. See below for more details.

• Fits nearly every car made

• 12dB crossovers with a smaller footprint for easier installation

• Three-position tweeter switch for dialing in your highs

• EVC™ (Extended Voice Coil) technology help deliver remarkable bass response

• Titanium tweeter construction and neodymium magnets to reveal subtle details

• UV-treated poly-foam surround assists with precise linear excursion

• Phase plugs in the woofer cones eliminate any distortion

• Steel mesh grilles protect your drivers

• Three tweeter mounting options including flush, angled and surface pods

Specifications

Woofer Size | in [mm]6x8 [160x200]Tweeter Size | in [mm]3/4 [20]Dome MaterialTitaniumPeak Power (watts, per ANSI/CTA-2031-A)225Recommended Amplifier Power (watts RMS)75Effective Frequency Range | Hz40-21kWoofer Mounting Hole Diameter | in [mm]5 x 7 3/16 [126x182]

Woofer Bottom Mount Depth | in [mm]2 3/16 [56]Flush Mounting Tweeter Hole Diameter | in [mm]1 9/16 [40]Flush Mount Tweeter Depth | in [mm]9/16 [14.5]High Pass | dB, at Frequency | Hz12, 4000Low Pass | dB, at Frequency | Hz12, 4000High Frequency Output Attenuation | dB0, 3, & 6Bolt-Thru GrillesNoWarrantyWhen purchased from an Authorized KICKER Dealer or kicker.com, KICKER warrants this product to be free from defects in material and workmanship under normal use for a period of TWO (2) YEARS from date of original purchase.

CS Series CSS69

CS-Series 6x9-inch Component Speakers are built for awesome sound that plays as long as the ride takes you.

CS-Series components include titanium tweeters and two-way crossovers with a smooth 12dB slope and three-position tweeter adjustment switch (0dB/+3dB/+6dB), included in each external crossover. The optimized footprint means great sound with hassle-free installation, no matter where you mount it!

These CS speakers work best with 150 watts of recommended power. See below for more details.

• Fits nearly every car made

• 12dB crossovers with a smaller footprint for easier installation

• Three-position tweeter switch for dialing in your highs

• EVC™ (Extended Voice Coil) technology help deliver remarkable bass response

• Titanium tweeter construction and neodymium magnets to reveal subtle details

• UV-treated poly-foam surround assists with precise linear excursion

• Phase plugs in the woofer cones eliminate any distortion

• Steel mesh grilles protect your drivers

• Three tweeter mounting options including flush, angled and surface pods

Specifications

Woofer Size | in [mm]6x9 [160x230]Tweeter Size | in [mm]3/4 [20]Dome MaterialTitaniumPeak Power (watts, per ANSI/CTA-2031-A)450Recommended Amplifier Power (watts RMS)150Effective Frequency Range | Hz30-21kWoofer Mounting Hole Diameter | in [mm]5 5/8 x 8 7/16 [143x215]

Woofer Bottom Mount Depth | in [mm]3 3/16 [81]Flush Mounting Tweeter Hole Diameter | in [mm]1 9/16 [40]Flush Mount Tweeter Depth | in [mm]9/16 [14.5]High Pass | dB, at Frequency | Hz12, 4000Low Pass | dB, at Frequency | Hz12, 4000High Frequency Output Attenuation | dB0, 3, & 6Bolt-Thru GrillesYesWarrantyWhen purchased from an Authorized KICKER Dealer or kicker.com, KICKER warrants this product to be free from defects in material and workmanship under normal use for a period of TWO (2) YEARS from date of original purchase.

CS Series CSC693

CS-Series 6x9-inch 3-Way Speakers are the perfect way to upgrade your factory system.

CS-Series 3-Ways deliver remarkable performance and ultra-clean bass with a heavy-duty motor/magnet structure not found in stock speakers. A stamped-steel frame supports a rigid polypropylene cone with EVC™ (Extended Voice Coil) technology for the best sonic quality. Using zero-protrusion PEI tweeters with neodymium magnets, you get the clarity you need without interfering with factory grilles.

The rugged 6x9-inch, 3-way speaker is especially cool. With a massive 300-watt peak power rating, this triaxial driver gives you extraordinary volume, while the integrated 2-inch midrange driver and dedicated tweeter give you crisp, accurate details for the realism you crave.

These CS speakers work best with 150 watts of recommended power. See below for more details.

• Fits nearly every car made

• Zero-protrusion tweeters to fit nearly any factory depth

• Woofer EVC™ (Extended Voice Coil) tech assists with precise linear excursion

• UV-treated poly-foam surround resists heat or direct sunlight

• Large woofer magnet in a heavy-duty motor for ultra-clean bass

• Integrated 2-inch (50mm) midrange drivers gives detailed attention to mid frequencies

• PEI-tweeter construction provides superb clarity

• Neodymium tweeter magnets allow for increased volume in high frequencies

• Steel mesh grilles included for speaker protection

Specifications

Speaker Design3 - wayWoofer Size [ in, mm ]6x9, 160x230Mid Size | in [mm]2, 50Tweeter Size [ in, mm ]1/2, 13DC Resistance [ ohm ]3.5Peak Power [ watts, per ANSI/CTA-2031-A ]450Recommended Amplifier Power [ watts RMS ]150Sensitivity - SPLo [ dB @ 1W, 1m ]92Effective Frequency Range [ Hz ]30-20kMounting Hole Diameter [ in, mm ]5 5/8 x 8 7/16, 143x215

Top Mount Depth [ in, mm ]3 3/16, 81Bottom Mount Depth [ in, mm ]3 11/16, 93Tweeter Protrusion [ in, mm ]1/16, 1GrillesYesTweeter Magnet MaterialElectric Crystal MotorTweeter Dome MateriaPEI [polyether imideTweeter DesignBalanced domeWoofer Cone MaterialPolypropyleneWoofer Surround MaterialPolyester foamWarrantyWhen purchased from an Authorized KICKER Dealer or kicker.com, KICKER warrants this product to be free from defects in material and workmanship under normal use for a period of TWO (2) YEARS from date of original purchase.

CS Series CSC68

CS-Series 6x8-inch Coaxial Speakers are the perfect way to upgrade your factory system.

CS-Series Coaxials deliver remarkable performance and ultra-clean bass with a heavy-duty motor/magnet structure not found in stock speakers. A stamped-steel frame supports a rigid polypropylene cone with EVC™ (Extended Voice Coil) technology for the best sonic quality. Using zero-protrusion PEI tweeters with neodymium magnets, you get the clarity you need without interfering with factory grilles.

These CS speakers work best with 75 watts of recommended power. See below for more details.

• Fits nearly every car made

• Zero-protrusion tweeters to fit nearly any factory depth

• Woofer EVC™ (Extended Voice Coil) tech assists with precise linear excursion

• UV-treated poly-foam surround resists heat or direct sunlight

• Large woofer magnet in a heavy-duty motor for ultra-clean bass

• PEI-tweeter construction provides superb clarity

• Neodymium tweeter magnets allow for increased volume in high frequencies

CS Series CSC67

CS-Series 6-3/4-inch Coaxial Speakers are the perfect way to upgrade your factory speakers.

CS-Series Coaxials deliver remarkable performance and ultra-clean bass with a heavy-duty motor/magnet structure not found in stock speakers. The stamped-steel framework supports a rigid polypropylene cone with EVC™ (Extended Voice Coil) technology for the best sonic quality. Using zero-protrusion PEI tweeters with neodymium magnets, you get the clarity you need without interfering with factory grilles.

These CS speakers work best with 100 watts of recommended power. See below for more details.

• Fits nearly every car made

• Zero-protrusion tweeters to fit nearly any factory depth

• Woofer EVC™ (Extended Voice Coil) tech assists with precise linear excursion

• UV-treated poly-foam surround resists heat or direct sunlight

• Large woofer magnet in a heavy-duty motor for ultra-clean bass

• PEI-tweeter construction provides superb clarity

• Neodymium tweeter magnets allow for increased volume in high frequencies

• Steel mesh grilles included for speaker protection

Specifications

Speaker Design2 - wayWoofer Size [ in, mm ]6 3/4, 165Tweeter Size [ in, mm ]1/2, 13DC Resistance [ ohm ]3.3Peak Power [ watts, per ANSI/CTA-2031-A ]300Recommended Amplifier Power [ watts RMS ]100Sensitivity - SPLo [ dB @ 1W, 1m ]90Effective Frequency Range [ Hz ]40-20kMounting Hole Diameter [ in, mm ]5 1/2, 140

Top Mount Depth [ in, mm ]1 13/16, 47Bottom Mount Depth [ in, mm ]2 1/16, 51Tweeter Protrusion [ in, mm ]0GrillesYesTweeter Magnet MaterialNeodymiumTweeter Dome MateriaPEI [polyether imideTweeter DesignBalanced domeWoofer Cone MaterialPolypropyleneWoofer Surround MaterialPolyester foamWarrantyWhen purchased from an Authorized KICKER Dealer or kicker.com, KICKER warrants this product to be free from defects in material and workmanship under normal use for a period of TWO (2) YEARS from date of original purchase

CS Series CSC65

CS-Series 6-1/2-inch Coaxial Speakers are the perfect way to upgrade your factory speakers.

CS-Series Coaxials deliver remarkable performance and ultra-clean bass with a heavy-duty motor/magnet structure not found in stock speakers. The stamped-steel framework supports a rigid polypropylene cone with EVC™ (Extended Voice Coil) technology for the best sonic quality. Using zero-protrusion PEI tweeters with neodymium magnets, you get the clarity you need without interfering with factory grilles.

These CS speakers work best with 100 watts of recommended power. See below for more details.

• Fits nearly every car made

• Zero-protrusion tweeters to fit nearly any factory depth

• Woofer EVC™ (Extended Voice Coil) tech assists with precise linear excursion

• UV-treated poly-foam surround resists heat or direct sunlight

• Large woofer magnet in a heavy-duty motor for ultra-clean bass

• PEI-tweeter construction provides superb clarity

• Neodymium tweeter magnets allow for increased volume in high frequencies

• Steel mesh grilles included for speaker protection

Specifications

Speaker Design2 - wayWoofer Size [ in, mm ]6 1/2, 160Tweeter Size [ in, mm ]1/2, 13DC Resistance [ ohm ]3.3Peak Power [ watts, per ANSI/CTA-2031-A ]300Recommended Amplifier Power [ watts RMS ]100Sensitivity - SPLo [ dB @ 1W, 1m ]90Effective Frequency Range [ Hz ]40-20kMounting Hole Diameter [ in, mm ]4 13/16, 123

Top Mount Depth [ in, mm ]1 11/16, 43Bottom Mount Depth [ in, mm ]2 1/16, 52Tweeter Protrusion [ in, mm ]0GrillesYesTweeter Magnet MaterialNeodymiumTweeter Dome MateriaPEI [polyether imideTweeter DesignBalanced domeWoofer Cone MaterialPolypropyleneWoofer Surround MaterialPolyester foamWarrantyWhen purchased from an Authorized KICKER Dealer or kicker.com, KICKER warrants this product to be free from defects in material and workmanship under normal use for a period of TWO (2) YEARS from date of original purchase

CS Series CSC5

CS-Series 5-1/4-Inch Coaxial Speakers are an excellent upgrade from factory speakers.

A significant upgrade from your factory sound, the stamped-steel framework supports a rigid polypropylene cone with EVC™ (Extended Voice Coil) technology for the best sonic quality. Using zero-protrusion PEI tweeters with neodymium magnets, you get the clarity you need without interfering with factory grilles.

These CS speakers work best with 75 watts of recommended power. See below for more details.

• Fits nearly every car made

• Zero-protrusion tweeters to fit nearly any factory depth

• Woofer EVC™ (Extended Voice Coil) tech assists with precise linear excursion

• UV-treated poly-foam surround resists heat or direct sunlight

• Large woofer magnet in a heavy-duty motor for ultra-clean bass

• PEI-tweeter construction provides superb clarity

• Neodymium tweeter magnets allow for increased volume in high frequencies

• Steel mesh grilles included for speaker protection

Specifications

Speaker Design2 - wayWoofer Size [ in, mm ]5 1/4, 130Tweeter Size [ in, mm ]1/2, 13DC Resistance [ ohm ]3.4Peak Power [ watts, per ANSI/CTA-2031-A ]225Recommended Amplifier Power [ watts RMS ]75Sensitivity - SPLo [ dB @ 1W, 1m ]90Effective Frequency Range [ Hz ]45-20kMounting Hole Diameter [ in, mm ]4 1/2, 115

Top Mount Depth [ in, mm ]1 ¾, 45Bottom Mount Depth [ in, mm ]2 1/16, 52Tweeter Protrusion [ in, mm ]0GrillesYesTweeter Magnet MaterialNeodymiumTweeter Dome MateriaPEI [polyether imideTweeter DesignBalanced domeWoofer Cone MaterialPolypropyleneWoofer Surround MaterialPolyester foamWarrantyWhen purchased from an Authorized KICKER Dealer or kicker.com, KICKER warrants this product to be free from defects in material and workmanship under normal use for a period of TWO (2) YEARS from date of original purchase.

CS Series CSC410

CS-Series 4x10-inch Coaxial Speakers give you the quality you want, with the factory fit you need.

The CS-Series design features near-zero tweeter protrusion, so your speakers fit perfectly behind factory grilles. This simple, drop-in solution delivers acclaimed KICKER performance with a stamped-steel framework, rigid polypropylene cone and EVC™ (Extended Voice Coil) technology. You get superb clarity, durability and volume – now and way down the road!

These CS speakers work best with 75 watts of recommended power. See below for more details.

• Fits nearly every car made that requires 4x10s, especially older GM models

• Zero-protrusion tweeters to fit nearly any factory depth

• Woofer EVC™ (Extended Voice Coil) tech assists with precise linear excursion

• UV-treated poly-foam surround resists heat or direct sunlight

• Large woofer magnet in a heavy-duty motor for ultra-clean bass

• PEI-tweeter construction provides superb clarity

• Neodymium tweeter magnets allow for increased volume in high frequencies

Specifications

Speaker Design2 - wayWoofer Size [ in, mm ]4x10 [100x250]Tweeter Size [ in, mm ]1/2 [13]DC Resistance [ ohm ]3.3Peak Power [ watts, per ANSI/CTA-2031-A ]225Recommended Amplifier Power [ watts RMS ]75Sensitivity - SPLo [ dB @ 1W, 1m ]88Effective Frequency Range [ Hz ]45-20kMounting Hole Diameter [ in, mm ]3-7/8 x 9-5/8, 90 x 238

Top Mount Depth [ in, mm ]2-3/8, 80Bottom Mount Depth [ in, mm ]2, 50Tweeter Protrusion [ in, mm ]0GrillesNoTweeter Magnet MaterialNeodymiumTweeter Dome MateriaPEI [polyether imideTweeter DesignBalanced domeWoofer Cone MaterialPolypropyleneWoofer Surround MaterialPolyester foamWarrantyWhen purchased from an Authorized KICKER Dealer or kicker.com, KICKER warrants this product to be free from defects in material and workmanship under normal use for a period of TWO (2) YEARS from date of original purchase

CS Series CSC46

CS-Series 4x6-inch Coaxial Speakers give you the quality you want, with the factory fit you need.

The CS-Series design features near-zero tweeter protrusion, so your speakers fit perfectly behind factory grilles. This simple, drop-in solution delivers acclaimed KICKER performance with a stamped-steel framework, rigid polypropylene cone and EVC™ (Extended Voice Coil) technology. You get superb clarity, durability and volume – now and way down the road!

These CS speakers work best with 50 watts of recommended power. See below for more details.

• Fits nearly every car made

• Zero-protrusion tweeters to fit nearly any factory depth

• Woofer EVC™ (Extended Voice Coil) tech assists with precise linear excursion

• UV-treated poly-foam surround resists heat or direct sunlight

• Large woofer magnet in a heavy-duty motor for ultra-clean bass

• PEI-tweeter construction provides superb clarity

• Neodymium tweeter magnets allow for increased volume in high frequencies

Specifications

Speaker Design2 - wayWoofer Size [ in, mm ]4x6 [100x160]Tweeter Size [ in, mm ]1/2 [13]DC Resistance [ ohm ]3.3Peak Power [ watts, per ANSI/CTA-2031-A ]150Recommended Amplifier Power [ watts RMS ]50Sensitivity - SPLo [ dB @ 1W, 1m ]88Effective Frequency Range [ Hz ]50-20kMounting Hole Diameter [ in, mm ]4 x 6, 101x152

Top Mount Depth [ in, mm ]1 11/16, 43Bottom Mount Depth [ in, mm ]2, 50Tweeter Protrusion [ in, mm ]0GrillesNoTweeter Magnet MaterialNeodymiumTweeter Dome MateriaPEI [polyether imideTweeter DesignBalanced domeWoofer Cone MaterialPolypropyleneWoofer Surround MaterialPolyester foamWarrantyWhen purchased from an Authorized KICKER Dealer or kicker.com, KICKER warrants this product to be free from defects in material and workmanship under normal use for a period of TWO (2) YEARS from date of original purchase.

CS Series CSC4

CS-Series 4-inch Coaxial Speakers deliver accuracy, durability and a factory fit!

These coaxial speakers are a significant upgrade in your sound. A stamped-steel framework supports a rigid polypropylene cone with EVC™ (Extended Voice Coil) technology for the best sonic quality. Using zero-protrusion PEI tweeters ensures you get every bit of clarity you need, without interfering with factory grilles.

These CS speakers work best with 50 watts of recommended power. See below for more details.

• Fits nearly every car made

• Zero-protrusion tweeters to fit nearly any factory depth

• Woofer EVC™ (Extended Voice Coil) tech assists with precise linear excursion

• UV-treated poly-foam surround resists heat or direct sunlight

• Large woofer magnet in a heavy-duty motor for ultra-clean bass

• PEI-tweeter construction provides superb clarity

• Neodymium tweeter magnets allow for increased volume in high frequencies

• Steel mesh grilles included for speaker protection

Specifications

Speaker Design2 - wayWoofer Size [ in, mm ]4, 100Tweeter Size [ in, mm ]1/2, 13DC Resistance [ ohm ]3.5Peak Power [ watts, per ANSI/CTA-2031-A ]150Recommended Amplifier Power [ watts RMS ]50Sensitivity - SPLo [ dB @ 1W, 1m ]88Effective Frequency Range [ Hz ]60-20kMounting Hole Diameter [ in, mm ]3 3/4, 95

Top Mount Depth [ in, mm ]1 13/16, 46Bottom Mount Depth [ in, mm ]2 1/16, 52Tweeter Protrusion [ in, mm ]0GrillesYesTweeter Magnet MaterialNeodymiumTweeter Dome MateriaPEI [polyether imideTweeter DesignBalanced domeWoofer Cone MaterialPolypropyleneWoofer Surround MaterialPolyester foamWarrantyWhen purchased from an Authorized KICKER Dealer or kicker.com, KICKER warrants this product to be free from defects in material and workmanship under normal use for a period of TWO (2) YEARS from date of original purchase.

CS Series CSC35

CS-Series 3-1/2 Inch Coaxial Speakers are built for clarity, volume and durability.

These coaxial speakers are a significant upgrade in your sound. A stamped-steel framework supports a rigid polypropylene cone and UV-treated foam surrounds that stand up to heat and direct sunlight, for years of outstanding audio quality.

These CS speakers work best with 30 watts of recommended power. See below for more details.

• Fits nearly every car made

• Zero-protrusion tweeters to fit nearly any factory depth

• Woofer EVC™ (Extended Voice Coil) tech assists with precise linear excursion

• UV-treated poly-foam surround resists heat or direct sunlight

• Large woofer magnet in a heavy-duty motor for ultra-clean bass

• PEI-tweeter construction provides superb clarity

• Neodymium tweeter magnets allow for increased volume in high frequencies

Specifications

Speaker Design2 - wayWoofer Size [ in, mm ]3 1/2, 89Tweeter Size [ in, mm ]1/2, 13DC Resistance [ ohm ]3.2Peak Power [ watts, per ANSI/CTA-2031-A ]90Recommended Amplifier Power [ watts RMS ]30Sensitivity - SPLo [ dB @ 1W, 1m ]88Effective Frequency Range [ Hz ]80-20kMounting Hole Diameter [ in, mm ]3 [78]

Top Mount Depth [ in, mm ]1 11/16, 42Bottom Mount Depth [ in, mm ]1 15/16, 48Tweeter Protrusion [ in, mm ]1/8 [3]GrillesNoTweeter Magnet MaterialNeodymiumTweeter Dome MateriaPEI [polyether imide]Tweeter DesignBalanced domeWoofer Cone MaterialPolypropyleneWoofer Surround MaterialPolyester foamWarrantyWhen purchased from an Authorized KICKER Dealer or kicker.com, KICKER warrants this product to be free from defects in material and workmanship under normal use for a period of TWO (2) YEARS from date of original purchase.

The AudioControl EPIC Series Amplifier delivers powerful, heart-pounding bass in a compact, thermally efficient design. Perfectly paired with The Epicenter Bass Restoration Processor (sold separately), it enhances your bass experience to new levels. This amplifier offers exceptional sound quality for the price and is the only AudioControl amplifier to include a bass knob for easy control.

• Digital Class-D Amplifier: Powerful yet compact and stable down to a 1 ohm load.

• 0-12dB Variable Bass Boost Q: Selects the frequency to boost

• Direct Wire Terminals with Hex Screws: Provide solid, reliable connections.

• 4-Gauge Power Terminal and 8-Gauge Speaker Terminal: Designed for maximum current flow.

• 91dB+ Signal-to-Noise Ratio (@ CEA Standard): Ultra-efficient idle draw (< 0.5-1A).

• Smart Auto Reset Protection Circuit: Multiple protection modes are in place to prevent damage if your amplifier encounters an issue.

  • Output Over-Current Protection (OCP)

  • Input Over-Voltage Protection (OVP)

  • Input Under-Voltage Protection (UVP)

  • Output DC-Offset Protection (DCP)

  • Over-Temperature Protection (OTP)

• THE EPICENTER LINK: Simplify your install by connecting the EPIC amplifier directly to an EPICENTER bass restoration processor.

FEATURES

• Compact High-Power Class D Monoblock Amplifier

• High-Current Design – 1Ω Stable

• Smart Auto-Reset Protection Circuit

• 12 dB/octave Linkwitz-Riley Variable Low Pass Filter

• 12 dB/octave Variable Subsonic Filter

• EPICBoost™ Variable Frequency Bass Boost

• ACR-E Remote Level Control Included

• Solid Power/Speaker Terminals with Hex Screws

• Built for THE EPICENTER®

SPECIFICATIONS

INPUTS

• Line-Level Inputs: 500mV – 12V RMS

OUTPUTS

• Continuous Power (RMS) @ 14.4V

  • 1 x 300 Watts @ 4 ohms

  • 1 x 500 Watts @ 2 ohms

  • 1 x 750 Watts @ 1 ohm

  • 1 x 1500 Watts @ 2 ohms Bridged (Strapped)

Remote Level Control

• Included

WEIGHTS & DIMENSIONS

• DIMENSIONS: 6.1″ W x 8.62″ L x 2.01″ H

PERFORMANCE

• Frequency Response (+/- 1 dB): 10 Hz – 190 Hz

• S/N Ratio: 92.2 dBa, Ref 300 Watts @ 4 ohms

• Power / Ground Wire Gauge: 4 AWG

• Recommended Fuse Rating: 80 Amps

• Low Pass Filter: 12dB/octave Linkwitz-Riley, 40 Hz to 180 Hz

• Subsonic Filter: 12 dB/octave Linkwitz-Riley, Off to 50 Hz

• EPIC Boost: Frequency Center: 30 Hz to 80 Hz, Gain: 0 to 12 dB

• Speaker Terminal Wire Gauge: 8 AWG

• Strapable: Yes

• Epicenter Link: Yes

IN THE BOX: EPIC750, Wrench, Screws, ACR-E Remote Level Control and Cable, The Epicenter Link (1m Harness), Manual, Warranty

The AudioControl EPIC Series Amplifier delivers powerful, heart-pounding bass in a compact, thermally efficient design. Perfectly paired with The Epicenter Bass Restoration Processor (sold separately), it enhances your bass experience to new levels. This amplifier offers exceptional sound quality and is the only AudioControl amplifier to include a bass knob for easy control.

• Digital Class-D Amplifier: Powerful yet compact and stable down to a 1 ohm load.

• 0-12dB Variable Bass Boost Q: Selects the frequency to boost

• Direct Wire Terminals with Hex Screws: Provide solid, reliable connections.

• 4-Gauge Power Terminal and 8-Gauge Speaker Terminal: Designed for maximum current flow.

• 91dB+ Signal-to-Noise Ratio (@ CEA Standard): Ultra-efficient idle draw (< 0.5-1A).

• Smart Auto Reset Protection Circuit: Multiple protection modes are in place to prevent damage if your amplifier encounters an issue.

  • Output Over-Current Protection (OCP)

  • Input Over-Voltage Protection (OVP)

  • Input Under-Voltage Protection (UVP)

  • Output DC-Offset Protection (DCP)

  • Over-Temperature Protection (OTP)

• THE EPICENTER LINK: Simplify your install by connecting the EPIC amplifier directly to an EPICENTER bass restoration processor.

FEATURES

• Compact High-Power Class D Monoblock Amplifier

• High-Current Design – 1Ω Stable

• Smart Auto-Reset Protection Circuit

• 12 dB/octave Linkwitz-Riley Variable Low Pass Filter

• 12 dB/octave Variable Subsonic Filter

• EPICBoost™ Variable Frequency Bass Boost

• ACR-E Remote Level Control Included

• Solid Power/Speaker Terminals with Hex Screws

• Built for THE EPICENTER®

SPECIFICATIONS

INPUTS

• Line-Level Inputs: 500mV – 12V RMS

OUTPUTS

• Continuous Power (RMS) @ 14.4V

  • 1 x 400 Watts @ 4 ohms

  • 1 x 700 Watts @ 2 ohms

  • 1 x 1000 Watts @ 1 ohm

  • 1 x 2000 Watts @ 2 ohms Bridged (Strapped)

Remote Level Control

• Included

WEIGHTS & DIMENSIONS

• DIMENSIONS: 6.1″ W x 9.41″ L x 2.01″ H

PERFORMANCE

• Frequency Response (+/- 1 dB): 10 Hz – 190 Hz

• S/N Ratio: 92.1 dBa, Ref 400 Watts @ 4 ohms

• Power / Ground Wire Gauge: 4 AWG

• Recommended Fuse Rating: 100 Amps

• Low Pass Filter: 12dB/octave Linkwitz-Riley, 40 Hz to 180 Hz

• Subsonic Filter: 12 dB/octave Linkwitz-Riley, Off to 50 Hz

• EPIC Boost: Frequency Center: 30 Hz to 80 Hz, Gain: 0 to 12 dB

• Speaker Terminal Wire Gauge: 8 AWG

• Strapable: Yes

• Epicenter Link: Yes

IN THE BOX: EPIC1000, Wrench, Screws, ACR-E Remote Level Control and Cable, The Epicenter Link (1m Harness), Manual, Warranty

The AudioControl EPIC Series Amplifier delivers powerful, heart-pounding bass in a compact, thermally efficient design. Perfectly paired with The Epicenter Bass Restoration Processor (sold separately), it enhances your bass experience to new levels. This amplifier offers exceptional sound quality for the price and is the only AudioControl amplifier to include a bass knob for easy control.

• Digital Class-D Amplifier: Powerful yet compact and stable down to a 1 ohm load.

• 0-12dB Variable Bass Boost Q: Selects the frequency to boost

• Direct Wire Terminals with Hex Screws: Provide solid, reliable connections.

• 4-Gauge Power Terminal and 8-Gauge Speaker Terminal: Designed for maximum current flow.

• 91dB+ Signal-to-Noise Ratio (@ CEA Standard): Ultra-efficient idle draw (< 0.5-1A).

• Smart Auto Reset Protection Circuit: Multiple protection modes are in place to prevent damage if your amplifier encounters an issue.

  • Output Over-Current Protection (OCP)

  • Input Over-Voltage Protection (OVP)

  • Input Under-Voltage Protection (UVP)

  • Output DC-Offset Protection (DCP)

  • Over-Temperature Protection (OTP)

• THE EPICENTER LINK: Simplify your install by connecting the EPIC amplifier directly to an EPICENTER bass restoration processor.

FEATURES

• Compact High-Power Class D Monoblock Amplifier

• High-Current Design – 1Ω Stable

• Smart Auto-Reset Protection Circuit

• 12 dB/octave Linkwitz-Riley Variable Low Pass Filter

• 12 dB/octave Variable Subsonic Filter

• EPICBoost™ Variable Frequency Bass Boost

• ACR-E Remote Level Control Included

• Solid Power/Speaker Terminals with Hex Screws

• Built for THE EPICENTER®

SPECIFICATIONS

INPUTS

• Line-Level Inputs: 500mV – 12V RMS

OUTPUTS

• Continuous Power (RMS) @ 14.4V, <1% THD

  • 1 x 250 Watts @ 4 ohms

  • 1 x 350 Watts @ 2 ohms

  • 1 x 500 Watts @ 1 ohm

  • 1 x 1000 Watts @ 2 ohms Bridged (Strapped)

Remote Level Control

• Included

WEIGHTS & DIMENSIONS

• DIMENSIONS: 6.1″ W x 5.9″ L x 2.01″ H

PERFORMANCE

• Frequency Response (+/- 1 dB): 10 Hz – 190 Hz

• S/N Ratio: 94 dBa, Ref 400 Watts @ 4 ohms

• Power / Ground Wire Gauge: 4 AWG

• Recommended Fuse Rating: 80 Amps

• Low Pass Filter: 12dB/octave Linkwitz-Riley, 40 Hz to 180 Hz

• Subsonic Filter: 12 dB/octave Linkwitz-Riley, Off to 50 Hz

• EPIC Boost: Frequency Center: 30 Hz to 80 Hz, Gain: 0 to 12 dB

• Speaker Terminal Wire Gauge: 8 AWG

• Strapable: Yes

• Epicenter Link: Yes

IN THE BOX: EPIC500, Wrench, Screws, ACR-E Remote Level Control and Cable, The Epicenter Link (1m Harness), Manual, Warranty

The AudioControl EPIC Series 4-Channel Amplifier delivers top-quality sound in a compact, thermally efficient design. Engineered with a high-current Class D design, it’s 2Ω stable, ensuring maximum power output while maintaining efficiency. With a smart auto-reset protection circuit and solid power/speaker terminals secured by hex screws, the EPIC Series amplifier offers reliable, exceptional sound quality in a rugged, space-saving package. The EPICBIGFOUR is designed to deliver massive power at 1400W RMS.

• Digital Class-D Amplifier: Powerful yet compact, designed to handle 2 ohm loads for high output.

• Direct Wire Terminals with Hex Screws: Provide solid, reliable connections.

• 4-Gauge Power Terminal and 8-Gauge Speaker Terminal: Designed for maximum current flow.

• 89dB+ Signal-to-Noise Ratio (@ CEA Standard): Ultra-efficient idle draw (< 0.5-1A).

• Smart Auto Reset Protection Circuit: Multiple protection modes are in place to prevent damage if your amplifier encounters an issue.

  • Output Over-Current Protection (OCP)

  • Input Over-Voltage Protection (OVP)

  • Input Under-Voltage Protection (UVP)

  • Output DC-Offset Protection (DCP)

  • Over-Temperature Protection (OTP)

• EPICENTER Link: Compatible with The EPICENTER bass restoration processor.

FEATURES

• Compact High-Power Class D Amplifier

• High-Current Design – 2Ω Stable

• 4 x 200 Watts @ 4 ohms

• 4 x 350 Watts @ 2 ohms

• 2 x 650 Watts @ 4 ohms Bridged

• Smart Auto-Reset Protection Circuit

• 12 dB/octave Linkwitz-Riley Variable High Pass & Low Pass Filters

• Solid Power/Speaker Terminals with Hex Screws

• ACR-E Remote Bass Knob Included

SPECIFICATIONS

INPUTS

• Line-Level Inputs: 500mV – 12V RMS

OUTPUTS

• Continuous Power (RMS) @ 14.4V

  • 4 x 200 Watts @ 4 ohms

  • 4 x 350 Watts @ 2 ohms

  • 2 x 650 Watts @ 4 ohms Bridged

WEIGHTS & DIMENSIONS

• DIMENSIONS: 6.1″ W x 10.56″ L x 2.01″ H

PERFORMANCE

• Frequency Response (+/- 1 dB): 10 Hz – 22 kHz

• S/N Ratio: 89 dBa, Ref 200 Watts @ 4 ohms

• Power / Ground Wire Gauge: 4 AWG

• Recommended Fuse Rating: 150 Amps

• High Pass Filter: 12dB/octave Linkwitz-Riley, Off, 50 Hz to 5000 Hz

• Low Pass Filter: 12dB/octave Linkwitz-Riley, Off, 50 Hz to 5000 Hz

• Speaker Terminal Wire Gauge: 8 AWG

IN THE BOX: EPICBIGFOUR, Wrench, Screws, ACR-E Remote Level Control & Cable, Manual, Warranty

The AudioControl EPIC Series 6-Channel 1200 Watt RMS Amplifier is a compact, full range class D amplifier engineered for flexibility, output, and reliability. Its high-current design delivers serious performance, while the Smart Auto-Reset Protection Circuit keeps everything running smoothly, even under demanding conditions.

Built for those who demand options—active 3-way front stage, 5-channel, active 6-channel, or a powerful bridged configuration. Whatever your design calls for, EPICSIX fits the plan and delivers. One amplifier delivers so many possibilities, giving you the freedom to build, tune and evolve your system, not limit it.

This crossover configuration ensures proper frequency distribution, improved sound clarity, and reliable speaker protection, while offering exceptional flexibility for a wide range of system designs. With adjustable high-pass and low-pass filters across multiple channels, EPICSIX allows precise tuning for active or passive setups, making it easy to adapt the amplifier to your design.

FEATURES

• Compact High-Power Class D Amplifier
• High-Current Design, 2 ohms Stable
• 6 x 100 Watts @ 4 ohms
• 6 x 200 Watts @ 2 ohms
• 2 x 400 Watts @ 4 ohms Bridged (Ch. 3/4 & 5/6)
• Smart Auto-Reset Protection Circuit
• 12 dB/octave Linkwitz-Riley Variable High Pass (Ch 1-6) & Low Pass Filters (Ch 3-6)
• Solid Power/Speaker Terminals with Hex Screws

SPECIFICATIONS

INPUTS

• Line-Level Inputs: 500mV – 12V RMS

OUTPUTS

• Continuous Power (RMS) @ 14.4V, <1% THD

  • 6 x 100 Watts @ 4 ohms

  • 6 x 200 Watts @ 2 ohms

  • 2 x 400 Watts @ 4 ohms Bridged

WEIGHTS & DIMENSIONS

• DIMENSIONS (WxLxH): 6.1″ x 12.56″ x 2.01″ / 155mm x 319mm x 51mm

PERFORMANCE

• Frequency Response (+/- 3 dB): 10 Hz – 24 kHz

• S/N Ratio: 98 dBa, Ref 100 Watts @ 4 ohms

• Power / Ground Wire Gauge: 4 AWG

• Recommended Fuse Rating: 125 Amps

• High Pass Filter: 12dB/octave Linkwitz-Riley, Off, 50 Hz to 5000 Hz

• Low Pass Filter: 12dB/octave Linkwitz-Riley, 50 Hz to 5000 Hz

• Speaker Terminal Wire Gauge: 10 AWG

IN THE BOX: EPICSIX Amplifier, Wrench, Screws, Manual

California Proposition 65

LOCPRO 4 channel adjustable high power line out converter with auto turn on

• Excellent quality audio
• Built-in remote turn-on circuit
• Accepts both high level and low level input
• Single Stereo Gain controls
• Ultra compact housing
• High Power - conservatively rated @ 55 watts per channel
• Full 20Hz to 20kHz frequency response (+/- 1.5 dB)
• Single harness design

L.O.C. Pro 2channel high power line output converter with remote level control.

• Accepts both high level and low level input • Built-in remote turn-on circuit
• Single Stereo Gain controls
• Ultra compact housing
• High Power - conservatively rated @ 55 watts per channel
• Full 20Hz to 20kHz frequency response (+/- 1.5 dB)
• Single harness design
• Bass knob can be taken apart for flush mounting

The KEY500.1 is a smart subwoofer amplifier and audio processor in one, featuring an AI-driven DSP (digital signal processing).

AUTO EQ

Using KICKER’s supplied test tones (below), the KEY automatically analyzes the audio being fed into the amplifier. Once this signal has been analyzed, the amp will automatically fix peaks in the signal coming in and restore the low bass that is typically missing. In a matter of moments, you get a clean, even bass response from your amp!

Start with these FREE TEST TONES for easy setup!

ALL THE CONTROL

Craft your sound with ease! The KEY500.1 comes with 24dB sub-sonic and low-pass crossovers, bass boost and gain controls.

HIDDEN TREASURE

Measuring about eight inches long and less than two inches high, the KEY500.1 fits nearly anywhere. Mount it behind your glove box, under the seat, or in your trunk with ease.

START. DON’T STOP.

The amplifier also features FIT+™ (Fail-safe Integration Technology PLUS) – which provides nearly universal compatibility with stock or aftermarket radios. Another industry first, the KEY500.1 is uniquely suited to accept factory input signals as high as 40 volts (400 watts). The KEY amplifier will work with almost every car on the road today, whether you have a factory or aftermarket audio system.

SUGGESTED ENCLOSURES

While we suggest this list for the ultimate bass experience, KEY500.1 will actually work with all KICKER subwoofers up to 12 inches; see your sales associate for the ideal subwoofer in your particular system, because every system is unique.

4Ω = 150 Watts RMS
2Ω = 300 Watts RMS
1Ω = 500 Watts RMS

VCVR122
TCWRT82
TCWRT102
TCWRT122
TL7T122
TL7T102
TL7T82
CWTB102
CWTB82
TL7R102
TL7S102
TRTP122
TRTP102
TRTP82
CVTDF122
CVTDF102

Remote Control

Your KEY500.1 amplifier is compatible with the CXARC remote control. Use it to customize your bass on the fly with just a turn of a knob!

If you have two mono amps or powered subwoofers, check out the DBRC Remote for controlling both from the same knob.

Specifications

White Paper 47KEY5001-wp.pdf Power (watts/ch), 1 Ohm mono500 Power (watts/ch), 2 Ohm mono300 Power (watts/ch), 4 Ohm mono150 Standard dimensions in.(H x W x L)1-11/16 x 4-1/8 x 8-1/8 Metric dimensions cm(H x W x L)4.3 x 9.2 x 20.7 Frequency Response (Hz):10-160

Input Sensitivity:high level: 1V-40V / low level: 125mV-5V Signal-to-Noise Ratio:>90dB, a-weighted, re: rated power Selectable Electronic Crossover:Variable Low Pass 40-160 Hz, Variable High Pass 10-40 Hz Warranty When purchased from an Authorized KICKER Dealer or kicker.com, KICKER warrants this product to be free from defects in material and workmanship under normal use for a period of TWO (2) YEARS from date of original purchase.

The biggest advance - in the smallest package.
Introducing the KEY smart amplifier and audio processor in one, featuring AI-driven DSP.

Pasmag Reviews the Key Smart Amplifier

Designed specifically to greatly improve the sonics of a typical “deck and four” or OEM sort of system, the Kicker KEY amplifier uses powerful digital signal processing to bring concert realism to your car. Read the full review here.

Hear what the other reviewers have to say about this product! Read the reviews here.

ACOUSTIC CORRECTION = AUDIO PERFECTION

Don't just make your system louder - make it clearer. Make it better…

Press the selector, and the microphone goes to work. The KEY uses a powerful internal computer to deliver dramatic improvements in realism and soundstage. A massive 40-band equalizer improves tonality, and a 24dB crossover re-defines the capabilities of each speaker.

The concert quality of your factory stereo is revealed! What would take hours for a professional to achieve happens in a matter of minutes. All automatically. All with the press of a single button.

Start with these FREE TEST TONES for easy setup!

POWERHOUSE

In addition to an unbelievable sound quality, the KEY200.4 delivers 200 watts of pumpin' power to your factory speakers. At KICKER, we know power and clarity always go hand-in-hand.

HIDDEN TREASURE

Measuring less than eight inches long and only two inches high, the KEY200.4 fits nearly anywhere. Mount it behind your radio, under the seat, or in your trunk with ease.

START. DON'T STOP.

The KEY200.4 is one of the first amps fully compatible with newer vehicles using start-stop systems. The amplifier also features FIT2™ (Fail-Safe Integration Technology), providing compatibility with nearly every stock and aftermarket radio on the road today.

KEEP THE BEAT

If the temperature reaches the threshold, the KEY200.4's dynamic power-management algorithms kick into gear! Instead of hearing the amplifier's volume “pumping” or blowing a fuse – KEY technology engages a nearly inaudible limiter/compressor, applied only to the peaks of the music for as little as milliseconds at a time. The amplifier quickly cools, which deactivates the compressor. Music returns to its full dynamic range without a moment’s interruption!

DETAILS, DETAILS

• 200 Watts Of Power (50x4)

• Auto EQ Microphone With Selector Switch Included

• Compatible with Start/Stop Vehicle Technology

• FIT2™ Technology Included

• Turn On Via Remote 12v Signal Or DC Offset

• Auto 40-Band Equalizer

• Bi-Amp Capability (Defeatable)

• Auto Compressor (Defeatable)

• Kicker EQ Preset (Defeatable)

• Auto Time Alignment (Defeatable)

• Auto Level Adjustment (Bi-Amp Mode Only)

• Auto Speaker Size Detection

• 24dB Crossovers

• 60/80/120hz High Pass Filter (Defeatable)

• Specifications

  White Paper 47KEY2004-wp.pdf Power (watts/ch), 4 Ohm stereo 50x 4 Microphone/Kicker EQ button included Standard dimensions (H x W x L) 1-11/16 x 2-3/4 x 7-3/8 Metric dimensions (H x W x L)4.3 x 7 x18.7 Frequency Response (Hz):20-20k, +0/-1dB

  Input Sensitivity:high level 250mV-10V Signal-to-Noise Ratio: >90dB, a-weighted, re: rated power Active Crossover:Off, 60, 80, or 120 Hz; 24dB/octave

• What's in the Box:

  1 - 4 channel power amplifier
  1 - microphone
  1 - microphone cable with switch
  1 - fuse holder
  1 - manual and installation hardwareWarrantyWhen purchased from an Authorized KICKER Dealer or kicker.com, KICKER warrants this product to be free from defects in material and workmanship under normal use for a period of TWO (2) YEARS from date of original purchase.

12" CompVR 2 Ohm Enclosure

CompVR Subwoofers loaded in factory-tuned loaded enclosures have been reengineered for incredible KICKER bass with Forced-Air Cooling™. You get a cool, reliable speaker that lasts and lasts. Thick black carpeting gives the tough enclosure a sleek, refined look. The front-facing tuned port raises the bar for acoustic efficiency, creating incredible bass levels with minimal amplifier power.

The CompVR Loaded Enclosure works best in SUVs, hatchbacks, and car trunks.

Specifications

Product Dimension Sheet52VCVR122 DimensionsTYPE:singleNO. OF WOOFERS/SIZE (in, cm):(1)12, 30IMPEDANCE (Ohms):2Recommended Amplifier Power (watts RMS)225-450Peak Power (watts, per ANSI/CTA-2031-A)900SENSITIVITY (dB 1w/1m):95Tuning Frequency [Hz]38

BOX TOP DEPTH (in, cm):11-1/4, 28.6BOX BOTTOM DEPTH (in, cm):14-1/2, 36.8BOX HEIGHT (in, cm):15-15/16, 40.5BOX WIDTH (in, cm):23-1/16, 58.5WarrantyWhen purchased from an Authorized KICKER Dealer or kicker.com, KICKER warrants this product to be free from defects in material and workmanship under normal use for a period of ONE (1) YEARS from date of original purchase. - Complete warranty information here.

The Warhorse WXA1000.4 provides 2000 watts of dynamic power while still maintaining complete reliability under this intense power use.

Full-Range Riot

• Engineered completely in-house by KICKER R&D

• Features extreme reliability under intense power and overall use

• Ultra-efficient, half-bridge Class-D design

• Fully start/stop compliant – operational to 6.5V

• 1/0 Power and Ground inputs to ensure you get the power you paid for

• Capable of daisy-chaining remote power across multiple amps

• Includes a heavy-duty, magnetic-mount diagnostic tool for monitoring voltage measurements and amp protection status – 19.75 feet (6m) RJ45 cable

• Fully compatible with most factory or aftermarket source units (with FIT+™ differential inputs)

• WARHORSE Install Scenarios: WarhorseInstallScenariosv2.pdf

• REMOTE/DIAGNOSTIC TOOL SURFACE MOUNT TEMPLATE

• REMOTE/DIAGNOSTIC TOOL FLUSH MOUNT TEMPLATE

• Specifications

  MODEL WXA1000.4 WARHORSE 1000.4 white paper with full tech graph data 49WXA10004 Whitepaper PDF WARHORSE 1000.4 Dimensions 49WXA10004 Product Dimensions PDF* RMS Power (watts/ch) 2 Ohm Stereo (@14.4V, <1% THD)450x4* RMS Power (watts/ch) 4 Ohm Stereo (@14.4V, <1% THD)250x4* RMS Power (watts/ch) 4 Ohm Bridged Mono (@14.4V, <1% THD)900x2** Dynamic Power (watts)2000 Frequency Response (Hz)10-20k Signal-to-Noise Ratio (dB; A-weighted, re: rated power)>90 Signal-to-Noise Ratio (dB; ref: 1W output)>70Input Sensitivity low level 125mV-5V high level 1V-40V Selectable Electronic Crossover - AMP 1Off/HP/LP; 24dB/octave BW, variable 10-5kHz w/ 10X switch; Selectable Electronic Crossover - AMP 2Off/HP/LP/BP; 24dB/octave BW, lo-pass 100-5000Hz, hi-pass 10-500Hz Dimensions (in, cm)H – 2-9/16, 6.5
  W – 9-1/8, 23.2 L – 15-3/8, 39.1

• Warranty When purchased from an Authorized KICKER Dealer or kicker.com, KICKER warrants this product to be free from defects in material and workmanship under normal use for a period of TWO (2) YEARS from date of original purchase.

QUAD 12" L7R 2-Ohm Enclosure

READY TO RUMBLE

With 2,400 watts of RMS power handling, this computer-designed basshead subwoofer system makes rattling your ride easier than ever!

GO LOW

Four KICKER L7R 12-inch subs come pre-loaded in this enclosure. The port is flared perfectly and tuned to 31Hz for some serious bump - without the expense of a custom enclosure.

BRACED FOR IMPACT

The QUAD box is made to take the pressure! Heavy, birch-veneer plywood construction and thick internal bracing keeps the enclosure stable, even under extreme SPL levels. Covered in durable black carpet and custom embroidered with the KICKER logo, the QL7R12 is pre-wired to a pair of two-Ohm terminals. All you need is an amp!

Specifications

TypeQUADWoofers/size [in, cm]4 Solo-Baric L7R 12, 30Impedance [Ohms]Dual 2-Ohm TerminalsRecommended Amplifier Power (watts RMS)2400SENSITIVITY [dB 1w/1m]98Tuning Frequency [Hz]31

Box Depth (in, mm):28, 711Box Height (in, mm):20-1/4, 514Box Width (in, mm):35-7/8, 912What's in the box?1 47QL7R122, 1 enclosure hardware pack, 1 instruction manual, 2 KICKER stickers,
1 47QL7R122, 1 massive sub enclosure, 1 enclosure mounting bracket kit,
Customer Info Card w/link to product page (via QR Code).WarrantyWhen purchased from an Authorized KICKER Dealer or kicker.com, KICKER warrants this product to be free from defects in material and workmanship under normal use for a period of ONE (1) YEARS from date of original purchase.

The Warhorse WXA3600.1 was engineered completely in-house by KICKER Research and Development for ultra-high SPL applications.

Not your Average Amp

• Features extreme reliability under intense bass power and overall use

• Engineered completely in-house by KICKER R&D

• Full-bridge Class-D design

• Quad micro-controller-regulated cooling fans

• Capable of daisy-chaining remote power across multiple amps

• Competition mode switch to avoid potentiometer creep, fix crossover setting, and gain-match multiple amps

• Includes premium remote bass-level control with a magnetic mount – 19.75 feet (6m) RJ45 cable

• Includes a heavy-duty, magnetic-mount diagnostic tool for monitoring voltage measurements and amp protection status – 19.75 feet (6m) RJ45 cable

• Fully compatible with most factory or aftermarket source units (with FIT+™ differential inputs)

• WARHORSE Install Scenarios: WarhorseInstallScenariosv2.pdf

• REMOTE/DIAGNOSTIC TOOL SURFACE MOUNT TEMPLATE

• REMOTE/DIAGNOSTIC TOOL FLUSH MOUNT TEMPLATE

• Specifications

  MODEL WXA3600.1 WARHORSE 3600.1 white paper with full tech graph data49WXA36001 Whitepaper PDF WARHORSE 3600.1 Dimensions 49WXA36001 Product Dimensions PDF RMS Power (watts/ch) 1 Ohm Mono (@ 14.4v, <1%THD)3600x1* RMS Power (watts/ch) 2 Ohm Mono (@ 14.4v, <1%THD)2500x1* RMS Power (watts/ch) 4 Ohm Mono (@ 14.4v, <1%THD)1400x1** Dynamic Power (watts)5000 Frequency Response (Hz)10-200 Signal-to-Noise Ratio (dB; A-weighted, re: rated power)>90

  Signal-to-Noise Ratio (dB; ref: 1W output)>70 Input Sensitivity low level 125mV-5V
  high level 1V-40V Selectable Electronic Crossover Variable Low-pass 50-200Hz, 24dB/octave Subsonic Filter Defeatable @ 15Hz, 24dB/octave Competition Mode warhorse-competition-mode.pdf Dimensions (in, cm)H – 2-9/16, 6.5
  W – 9-1/8, 23.2 L – 15-3/8, 39.1

• Warranty When purchased from an Authorized KICKER Dealer or kicker.com, KICKER warrants this product to be free from defects in material and workmanship under normal use for a period of TWO (2) YEARS from date of original purchase.

If you have two mono amps or powered subwoofers, check out the DBRC Remote for controlling both from the same knob.

Vented 12" Comp Enclosure

Comp 12-Inch Subwoofer Enclosure

The 2016 Comp 12-Inch Subwoofer Enclosure comes loaded with a single 4-Ohm terminal.

With a custom-made port plus updated subwoofer and box design, this ultra-efficient enclosure doles out a new level of bass in a very small space.

The Comp 12-Inch Loaded Enclosure works best with 150 watts of recommended power.

Specifications

Subwoofer (in, cm)12, 30Impedance (Ohms)4Recommended Amplifier Power (watts RMS)150Peak Power (watts, per ANSI/CTA-2031-A)300Tuning Frequency [Hz]32

DimensionsEnclosure Depth 1 (in, cm)11-1/4, 28.5Enclosure Depth 2 (in, cm)14-5/8, 37.1Enclosure Height (in, cm)16-1/8, 40.9Enclosure Width (in, cm)17-11/16, 44.8WarrantyWhen purchased from an Authorized KICKER Dealer or kicker.com, KICKER warrants this product to be free from defects in material and workmanship under normal use for a period of ONE (1) YEARS from date of original purchase.

Dual 12" Comp Enclosure

Comp 12-Inch Dual Subwoofer Enclosure

The 2016 Comp 12-Inch Dual Subwoofer Enclosure comes loaded with a single 2-Ohm terminal.

With a stout custom box design and a pair of 12-inch KICKER Comp subs, this new enclosure doles out giant amounts of bass. Pair the box to a DX-Series Amplifier for the best combination of power and affordability.

The Comp 12-inch Loaded Enclosure works best with 300 watts of recommended power.

Specifications

Dual Subwoofer (in, cm)12, 30Impedance (Ohms)2Recommended Amplifier Power (watts RMS)300Peak Power (watts, per ANSI/CTA-2031-A)600Tuning Frequency [Hz]31

DimensionsEnclosure Depth 1 (in, cm)13-7/8, 35.2Enclosure Depth 2 (in, cm)17-1/4, 43.8Enclosure Height (in, cm)16, 40.5Enclosure Width (in, cm)32-7/16, 82.3WarrantyWhen purchased from an Authorized KICKER Dealer or kicker.com, KICKER warrants this product to be free from defects in material and workmanship under normal use for a period of ONE (1) YEARS from date of original purchase.

Dual 12" CompC 2 Ohm Enclosure

The CompC Dual 12-Inch Subwoofer Enclosure comes loaded with a single 2-Ohm terminal.

Features:

• Fits Perfectly In A Trunk or SUV

• Genuine CompC Subwoofer

• Custom Port Design

• Made Of Heavy MDF

• Spring Loaded Speaker Terminal

• Thick Black Carpet Protects the Enclosure

• Embroidered KICKER Logo

• Works Perfectly with CXA800.1

This enclosure works best with 600 watts of recommended power. See below for more details.

Specifications

Product Dimension Sheet50DCWC122 DimensionsDual Subwoofers (in, cm)(2) 12, 30Impedance (Ohms)2Recommended Amplifier Power (watts RMS)600Peak Power (watts, per ANSI/CTA-2031-A)1200Sensitivity (dB 1w/1m)99.9Tuning Frequency [Hz]31Box Top Depth (in, cm)14, 35.6

Box Bottom Depth (in, cm)17-1/4, 43.8Box Height (in, cm)16, 40.6Box Width (in, cm)31-7/8, 81.0Recommended Amplifiers!CXA800.1WarrantyWhen purchased from an Authorized KICKER Dealer or kicker.com, KICKER warrants this product to be free from defects in material and workmanship under normal use for a period of ONE (1) YEARS from date of original purchase.

Dual 10" CompC Enclosure

The CompC Dual 10-Inch Subwoofer Enclosure comes loaded with a single 2-Ohm terminal.

Features:

• Fits Perfectly In A Trunk or SUV

• Genuine CompC Subwoofer

• Custom Port Design

• Made Of Heavy MDF

• Spring Loaded Speaker Terminal

• Thick Black Carpet Protects the Enclosure

• Embroidered KICKER Logo

• Works Perfectly with CXA800.1

This enclosure works best with 500 watts of recommended power. See below for more details.

Specifications

Product Dimension Sheet50DCWC102 DimensionsDual Subwoofers (in, cm)(2) 10, 25Impedance (Ohms)2Recommended Amplifier Power (watts RMS)500Peak Power (watts, per ANSI/CTA-2031-A)1000Sensitivity (dB 1w/1m)98.4Tuning Frequency [Hz]35Box Top Depth (in, cm)13-1/2, 34.3

Box Bottom Depth (in, cm)16-1/4, 41.4Box Height (in, cm)14, 35.6Box Width (in, cm)28, 71.1Recommended Amplifiers!CX600.1-the ideal matchWarrantyWhen purchased from an Authorized KICKER Dealer or kicker.com, KICKER warrants this product to be free from defects in material and workmanship under normal use for a period of ONE (1) YEARS from date of original purchase.

CX-Series amps reach massive power levels thanks to an optimized circuit layout and the highest-grade internal components. Highly efficient heat sinks keep the amp cool with a sophisticated look. Mono amps offer an optional remote level control to adjust your bass right from the dash.

• Efficient Class-D amplifier

• Three-second turn-on/off delay to eliminate unwanted interference

• Variable 12dB crossovers provides control to dial in perfect sound

• KickEQ™ 6dB variable bass boost for those additional low frequencies

• 24dB subsonic filter for protection from potentially damaging frequencies

• FIT+™ (Fail-safe Integration Technology-PLUS) means it works with nearly every radio

• Accepts up to 40-volt input signal

• Small footprint for easier installation

• Compatible with CXARC Remote Bass Control

• Vertical mounting hardware included for another unique look

• Power Pack

  This CX-Series Mono Amp is now one-ohm stable, giving you even more power and wiring options for your system! This Class-D CXA400.1 features a variable bass boost with KickEQ™, giving you as much as a 6dB of extra bump. A powerful 12dB crossover and 24dB subsonic filter is included, letting you quickly tune your system to perfection. Use the full-range outputs to expand your system with other bass amps, or a full-range amp to complete your system. From your dash, a simple turn of the optional CXARC Remote Bass Controller (sold separately) increases your output to fit your choice of music.

  CX.1 Amplifiers accept up to 40 volts (400 watts) of speaker-level input signal. This kind of flexibility both makes line-out converters unnecessary and optimizes your sound quality at the same time!

  Expand your system with full-range, RCA pass-through outputs, then choose a “standard” mount or a cool vertical mount with the included hardware.

  CX.1 Amps deliver as much as 400 watts into one bass channel. See below for more details.

• Specifications

  MODEL CXA400.1 Power (watts/ch) 4 Ohm150x1 Power (watts/ch) 2 Ohm300x1 Power (watts/ch) 1 Ohm400x1 CXRC Remote Bass Capable (sold sep.)yes Dimensions (in, cm): (all models 2-3/8, 5.9H x 6-3/4, 17W x ...L)8-1/8, 20.6 Frequency Response (Hz):25-200, +0/-1dB

  Input Sensitivity:125mV–5V (Low Level) White Paper46CXA4001-wp.pdf
  1V–40V (High Level) Signal-to-Noise Ratio:>95dB, a-weighted, re: rated powerActive Crossover:Variable Lo-pass 50Hz–200Hz, 12dB/octave Subsonic Filter:25Hz @24dB/octave KickEQ™ Boost Variable 0-6dB @40Hz Warranty When purchased from an Authorized KICKER Dealer or kicker.com, KICKER warrants this product to be free from defects in material and workmanship under normal use for a period of TWO (2) YEARS from date of original purchase.

If you have two mono amps or powered subwoofers, check out the DBRC Remote for controlling both from the same knob.

CX-Series amps reach massive power levels thanks to an optimized circuit layout and the highest-grade internal components. Highly efficient heat sinks keep the amp cool and an optional remote level control lets you adjust bass on the fly.

• Class A/B full-range channels

• Class D bass channel included for one amp to run an entire system

• Three-second turn-on/off delay to eliminate unwanted interference

• Variable 12dB crossovers provides control to dial in perfect sound

• KickEQ™ 6dB variable bass boost for those additional low frequencies

• 24dB subsonic filter for protection from potentially damaging frequencies

• FIT+™ (Fail-safe Integration Technology-PLUS) means it works with nearly every radio

• Accepts up to 40-volt input signal

• Small footprint for easier installation

• Vertical mounting hardware included for another unique look

• Five Channels of Fun

  The CXA660.5 Amplifier is built to be the complete package in one cool-looking amp.

  This CX amplifier uses powerful Class A/B technology to power four mid/high-range channels and an ultra-efficient Class D power plant for the bass channel. The amp also comes equipped with FIT+™ (Fail-safe Integration Technology-PLUS), giving you superior clarity and dependability.

  KickEQ™ variable bass boost gives you as much as a 6dB of extra bump. A powerful 12dB crossover and 24dB subsonic filter is also included, letting you quickly tune your entire system to taste. From your dash, a simple turn of the optional CXARC Remote Bass Controller (sold separately) increases your output to fit your choice of music.

  This CX amplifier delivers as much as 90 watts into four full-range channels or 180 watts into two-bridged channels, plus as much as 300 watts into one bass channel. See below for more details.

• Specifications

  MODEL CXA660.5 Power (watts/ch) 4 Ohm Stereo65x4 Power (watts/ch) 2 Ohm Stereo90x4 Power (watts/ch) 4 Ohm Stereo180x2 Power (watts/ch) 4 Ohm Mono Sub Ch150x1 Power (watts/ch) 2 Ohm Mono Sub Ch300x1 CXRC Remote Bass Capable (sold sep.)yes Dimensions (in, cm): (all models 2-3/8, 5.9H x 6-3/4, 17 W x ...L)14-1/8, 35.7 Frequency Response (Hz):10Hz-20kHz Frequency Response (Hz – Sub Ch.):25Hz-200Hz

  Input Sensitivity:125mV–5V (Low Level) White Paper46CXA6605-wp.pdf
  1V–40V (High Level) Signal-to-Noise Ratio:90dB Active Crossover:Amp 1-2: High Pass 10-200Hz @ 12dB/Octave
  Sub Channel: Low Pass 50-200Hz @ 12dB/Octave Subsonic Filter:25Hz @24dB/Octave KickEQ™ BoostVariable 0-6dB @40Hz Warranty When purchased from an Authorized KICKER Dealer or kicker.com, KICKER warrants this product to be free from defects in material and workmanship under normal use for a period of TWO (2) YEARS from date of original purchase.

If you have two mono amps or powered subwoofers, check out the DBRC Remote for controlling both from the same knob.

CX-Series Amps reach massive power levels thanks to an optimized circuit layout and the highest-grade internal components. Highly efficient heat sinks keep the amp cool with a sophisticated new look. Mono amps offer an optional remote level control to adjust your bass right from the dash.

• Efficient Class-D amplifier

• Three-second turn-on/off delay to eliminate unwanted interference

• Variable 12dB crossovers provides control to dial in perfect sound

• KickEQ™ 6dB variable bass boost for those additional low frequencies

• 24dB subsonic filter for protection from potentially damaging frequencies

• FIT+™ (Fail-safe Integration Technology-PLUS) means it works with nearly every radio

• Accepts up to 40-volt input signal

• Small footprint for easier installation

• Compatible with CXARC Remote Bass Control

• Vertical mounting hardware included for another unique look

• Power Station

  The CXA1800.1 Mono Amplifier is built for big bass in a sleek, yet affordable package. Using a Class-D power package and FIT+™ (Fail-safe Integration Technology-PLUS) for superior dependability, this amp features a variable bass boost with KickEQ™, giving you as much as a 6dB of extra bump. From your dash, a simple turn of the optional CXARC Remote Bass Controller (sold separately) increases your output to fit your choice of music.

  CX-Series Amplifiers accept up to 40 volts (400 watts) of speaker-level input signal. This kind of flexibility both makes line-out converters unnecessary and optimizes your sound quality at the same time!

  A powerful 12dB crossover and 24dB subsonic filter is included, letting you quickly tune your system to perfection. Use the full range outputs to expand your system with other bass amps, or add a full range amp to complete your system.

  This CX-Series Amplifier delivers as much as 1,800 watts into one bass channel. See below for more details.

• Specifications

  MODEL CXA1800.1 Power (watts/ch) 4 Ohm900x1 Power (watts/ch) 2 Ohm1800x1 Power (watts/ch) 1 Ohm1800x1 +/-10% CXRC Remote Bass Capable (sold sep.)yes Dimensions (in, cm): (all models 2-3/8, 5.9H x 6-3/4, 17W x ...L) 14-3/8, 36.4 Frequency Response (Hz):25-200Hz

  Input Sensitivity:125mV–5V (Low Level) 1V–40V (High Level) White Paper46CXA18001-wp.pdf Signal-to-Noise Ratio:95dB Active Crossover:Variable Lo-pass 50Hz–200Hz, 12dB/octave Subsonic Filter:25Hz @24dB/octave KickEQ™ BoostVariable 0-6dB @40Hz Warranty When purchased from an Authorized KICKER Dealer or kicker.com, KICKER warrants this product to be free from defects in material and workmanship under normal use for a period of TWO (2) YEARS from date of original purchase.

If you have two mono amps or powered subwoofers, check out the DBRC Remote for controlling both from the same knob.

CX-Series mono amps offer an optional remote level control to adjust your bass right from the dash. Dial it up the way you want to hear it.

CXARC Remote

Customize your bass, right from your front seat.

The CXARC is a remote bass controller, compatible with the KEY500.1 and Hideaway, and any CX, DX or PX KICKER amplifier equipped with a REMOTE BASS jack on its end.

Cable Length - 19.75 feet

The CXA1200.1 Mono Amplifier is built for affordable power and performance, thanks to an optimized circuit layout and the high-grade internal components.

• Efficient Class-D amplifier

• Three-second turn-on/off delay to eliminate unwanted interference

• Variable 12dB crossovers provides control to dial in perfect sound

• KickEQ™ 6dB variable bass boost for those additional low frequencies

• 24dB subsonic filter for protection from potentially damaging frequencies

• FIT+™ (Fail-safe Integration Technology-PLUS) means it works with nearly every radio

• Accepts up to 40-volt input signal

• Small footprint for easier installation

• Compatible with CXARC Remote Bass Control

• Vertical mounting hardware included for another unique look

• Mono Monster

  This mono CX-Series Amp is now one-ohm stable, giving you even more wiring options for your system! The Class-D CXA1200.1 features a variable bass boost with KickEQ™, giving you as much as a 6dB of extra bump. A powerful 12dB crossover and 24dB subsonic filter is included, letting you quickly tune your system to perfection. From your dash, a simple turn of the optional CXARC Remote Bass Controller (sold separately) increases your output to fit your choice of music.

  CX-Series Amplifiers accept up to 40 volts (400 watts) of speaker-level input signal. This kind of flexibility both makes line-out converters unnecessary and optimizes your sound quality at the same time!

  Use the full-range outputs to expand your system with other bass amps, or add a full-range amp to complete your system.

  This CX.1 Amplifier delivers as much as 1,200 watts into one bass channel. See below for more details.

• Specifications

  MODEL CXA1200.1 Power (watts/ch) 4 Ohm600x1 Power (watts/ch) 2 Ohm1200x1 Power (watts/ch) 1 Ohm1200x1 +/-10% CXRC Remote Bass Capable (sold sep.)yes Dimensions (in, cm): (all models 2-3/8, 5.9H x 6-3/4, 17W x ...L)12, 30.6 Frequency Response (Hz):25-200Hz

  Input Sensitivity:125mV–5V (Low Level) White Paper46CXA12001-wp.pdf
  1V–40V (High Level) Signal-to-Noise Ratio:95dB Active Crossover:Variable Lo-pass 50Hz–200Hz, 12dB/octave Subsonic Filter:25Hz @24dB/octave KickEQ™ Boost Variable 0-6dB @40Hz Warranty When purchased from an Authorized KICKER Dealer or kicker.com, KICKER warrants this product to be free from defects in material and workmanship under normal use for a period of TWO (2) YEARS from date of original purchase.

If you have two mono amps or powered subwoofers, check out the DBRC Remote for controlling both from the same knob.

The CXA800.1 Mono Amplifier is built for affordable power and performance, thanks to optimized circuit layout and high-grade internal components.

• Efficient Class-D amplifier

• Three-second turn-on/off delay to eliminate unwanted interference

• Variable 12dB crossovers provides control to dial in perfect sound

• KickEQ™ 6dB variable bass boost for those additional low frequencies

• 24dB subsonic filter for protection from potentially damaging frequencies

• FIT+™ (Fail-safe Integration Technology-PLUS) means it works with nearly every radio

• Accepts up to 40-volt input signal

• Small footprint for easier installation

• Compatible with CXARC Remote Bass Control

• Vertical mounting hardware included for another unique look

• About That Power

  This CX-Series Mono Amp is now one-ohm stable, giving you even more power and wiring options for your system! This Class-D CXA800.1 features a variable bass boost with KickEQ™, giving you as much as a 6dB of extra bump. A powerful 12dB crossover and 24dB subsonic filter is included, letting you quickly tune your system to perfection. Use the full-range outputs to expand your system with other bass amps, or a full-range amp to complete your system. From your dash, a simple turn of the optional CXARC Remote Bass Controller (sold separately) increases your output to fit your choice of music.

  CX-Series Amplifiers accept up to 40 volts (400 watts) of speaker-level input signal. This kind of flexibility both makes line-out converters unnecessary and optimizes your sound quality at the same time!

  Expand your system with full-range, RCA pass-through outputs, then choose a “standard” mount or a cool vertical mount with the included hardware.

  This CX.1 amplifier delivers as much as 800 watts into one bass channel. See below for more details.

• Specifications

  MODEL CXA800.1 Power (watts/ch) 4 Ohm300x1 Power (watts/ch) 2 Ohm600x1 Power (watts/ch) 1 Ohm800x1 CXRC Remote Bass Capable (sold sep.)yes Dimensions (in, cm): (all models 2-3/8, 5.9H x 6-3/4, 17W x ...L)8-1/8, 20.6 Frequency Response (Hz):25-200, +0/-1dB

  Input Sensitivity:125mV–5V (Low Level) White Paper 46CXA8001-wp.pdf
  1V–40V (High Level) Signal-to-Noise Ratio:>95dB, a-weighted, re: rated powerActive Crossover:Variable Lo-pass 50Hz–200Hz, 12dB/octave Subsonic Filter:25Hz @24dB/octave KickEQ™ BoostVariable 0-6dB @40Hz Warranty When purchased from an Authorized KICKER Dealer or kicker.com, KICKER warrants this product to be free from defects in material and workmanship under normal use for a period of TWO (2) YEARS from date of original purchase.

If you have two mono amps or powered subwoofers, check out the DBRC Remote for controlling both from the same knob.

The CXA360.4 Four-Channel Amplifier is built to power all your door speakers in a single, powerful package.Class A/B full-range channels

• Flexible and Fun

  Using Class A/B power, this amp features a variable bass boost with KickEQ™, giving you as much as a 6dB of extra bump. A powerful 12dB crossover is also included, letting you quickly tune your system to perfection.

  CX-Series Amplifiers accept up to 40 volts (400 watts) of speaker-level input signal. This kind of flexibility both makes line-out converters unnecessary and optimizes your sound quality at the same time!

  Highly efficient heat sinks keep the amp cool with a sophisticated new look, while KICKER’s FIT+™ (Fail-safe Integration Technology-PLUS), gives you outstanding noise rejection - even with premium factory audio systems.

  This CX-Series Amplifier delivers as much as 90 watts into four full-range channels, or 180 watts into two bridged channels. See below for more details.

• Three-second turn-on/off delay to eliminate unwanted interference

• Variable 12dB crossovers provides control to dial in perfect sound

• KickEQ™ 6dB variable bass boost for those additional low frequencies

• FIT+™ (Fail-safe Integration Technology-PLUS) means it works with nearly every radio

• Accepts up to 40-volt input signal

• Small footprint for easier installation

• Vertical mounting hardware included for another unique look

• Compatible with CXARC Remote Bass Control (AMP2 must be in LO-PASS X-OVER mode)

• Specifications

  MODEL CXA360.4 Power (watts/ch) 4 Ohm Stereo65x4 Power (watts/ch) 2 Ohm Stereo 90x4 Power (watts/ch) 4 Ohm Mono180x2 CXARC Remote Bass Capable (sold sep.)Yes Dimensions (in, cm): (all models 2-3/8, 5.9H x 6-3/4, 17W x ...L) 12-1/2, 31.7 Frequency Response (Hz):10Hz-20kHz

  Input Sensitivity:125mV–5V (Low Level) White Paper46CXA3604-wp.pdf
  1V–40V (High Level) Signal-to-Noise Ratio:95dB Active Crossover:HI, LO or OFF; Variable 50–200Hz @ 12dB/OctaveSubsonic Filter:n/a KickEQ™ BoostVariable 0-6dB @40Hz

• Warranty When purchased from an Authorized KICKER Dealer or kicker.com, KICKER warrants this product to be free from defects in material and workmanship under normal use for a period of TWO (2) YEARS from date of original purchase.

• 420 Segment 3 Line Text Display

• Amazon Alexa Ready

• 13 Band EQ & Digital Time Alignment

• Bluetooth Direct Access Button

• Variable Color Illumination

• Front USB & AUX In

• 3 Preouts 2.5V

Amazon Alexa Compatible

With Alexa on your KENWOOD Receivers, you can use your voice to control your music and much more. Using Alexa is as easy as asking a question. Just ask and Alexa can play your favorite song, skip to the next track, change the volume, read you the news and more.

Using Alexa on the KENWOOD Receiver is simple and hands-free, just ask and Alexa will respond instantly, or press the Amazon Alexa key on the KENWOOD receiver, you can easily activate Alexa and get voice control.

*For more information, visit https://www.kenwood.com/car/app/amazon_alexa/eng/

 Amazon Alexa Key

Amazon, Alexa and all related logos are trademarks of Amazon.com, Inc. or its affiliates.

Streaming Music

Listen to popular music applications and music stored on your device with basic audio controls.

Equipped with the Intuitive KENWOOD Music Mix

Up to 5 Bluetooth® devices can be connected to the receiver at the same time, allowing you to take turns streaming music with your friends and family.

Dual Phone Connection

While you are connected through Bluetooth, with a touch of a button you can switch between two phones.

Control the Receiver from Your Smartphone with the KENWOOD Remote App

A smartphone application can control most basic functions of the receiver over the Bluetooth connection of the paired phone (iPhone or Android).

Front USB and AUX Input Compatible with a Variety of USB-Enabled Devices

Easy front panel connection for your compatible USB- enabled devices. These include Mass Storage Class devices like iPods, smartphones, and USB flash drives. The USB input will allow you to charge and control the music playback of your select devices.

The Best Audio Experience

13-Band EQ / Digital Time Alignment

13-Band equalizer and DTA gives optimal tuning enhancements for the listener.

Playable USB Files

Compatible with a broad range of audio file formats from FLAC and WAV, to MP3, WMA and AAC.

Music CodecPlayable up toFLAC～96kHz / ～24bitWAV～44.1kHz / ～16bitMP3～48kHz / ～320kbpsWMA～48kHz / ～192kbpsAAC～48kHz / ～320kbps

Digital Time Alignment

Sound coming from a variety of speakers located within your car are time aligned to arrive at your ear at exactly the same time.

Drive Equalizer

Drive EQ boosts specific frequencies in the audio signal to compensate the negative impact of road noise.

System EXPANSION Ready

The KENWOOD receiver has RCA outputs to expand the system to connect to an additional amplifier or powered subwoofer.

Additional Features

Match Your Mood with Variable Color Illumination

Bright variable color LEDs can be adjusted to match any color dash lighting.

Adjustable 3-Zone Variable Color Illumination

You can adjust the front panel illumination into 3 separate color zones.

SiriusXM Radio Ready

Access additional music, sports and entertainment content on the go with SiriusXM Radio.
(Optional SiriusXM tuner required, sold separately)

Spanish and French Text Display

On-screen display menu now available in Spanish and French.

VXA Mono Amplifiers offer a remote level control to adjust your bass right from the dash.Class-D mono channel for lower current draw and longer playing time

Class-Leading Power

• Mono power stable to 1 Ohm for louder bass

• Remote Bass Control for fingertip tuning

• Variable 12dB crossovers for ideal speaker matching

• 24dB subsonic filter for protection from potentially damaging frequencies

• KickEQ™ variable bass boost for louder low frequencies

• KICKER FIT™ (Fail-safe Integration Technology) means it works with nearly every radio

• Small footprint for easy installation

• Compatible with start/stop vehicle technology

• DC-offset automatic turn on

• Class SB-compatible for OEM integration within Class-SB head units

• Power Pack

  The VXA-Series Mono Amp is one-ohm stable, giving you even more power and wiring options for your system! This Class-D VXA1000.1 features a variable bass boost with KickEQ™, giving you as much as a 6dB of extra bump.

• Remote Ready

  VXA-Series Amplifiers with mono channels include the VXARC Remote Bass Knob. Use it to customize your bass on the fly with just a turn of a dial!

• Specifications

  Power (watts/ch), 1 Ohm Mono:1000 x 1 Power (watts/ch), 2 Ohm Mono:750 x 1 Power (watts/ch), 4 Ohm Mono:400 x 1 Dynamic Power (watts):1400Frequency Response (Hz):10-200 (+0/-6dB) VXARC Remote Bass:included Dimensions (in, cm):Height: 2-3/16 (5.6 cm) Width: 5-29/32 (15 cm) Length: 9-1/2 (24.2 cm)

  Input Sensitivity:125mV-10V Signal-to-Noise Ratio:>95dB (A-weighted, re: rated power) Selectable Electronic Crossover:12dB/octave, variable LP 50-200Hz Subsonic Filter:fixed 15Hz, 24dB/octave KickEQ Bass Boost:variable 0-6dB @ 40Hz

• Warranty When purchased from an Authorized KICKER Dealer or kicker.com, KICKER warrants this product to be free from defects in material and workmanship under normal use for a period of TWO (2) YEARS from date of original purchase.

• 420 Segment 3 Line Text Display

• Amazon Alexa Ready

• Built-in HD Radio Tuner

• Dual USB

• 13Band EQ & Digital Time Alignment

• Variable Color Illumination

• 200mm Escutcheon Panel Included

• 3 Preouts 5.0V

Amazon Alexa Compatible

With Alexa on your KENWOOD Receivers, you can use your voice to control your music and much more. Using Alexa is as easy as asking a question. Just ask and Alexa can play your favorite song, skip to the next track, change the volume, read you the news and more.

Using Alexa on the KENWOOD Receiver is simple and hands-free, just ask and Alexa will respond instantly, or press the Amazon Alexa key on the KENWOOD receiver, you can easily activate Alexa and get voice control.

 Amazon Alexa Key

Amazon, Alexa and all related logos are trademarks of Amazon.com, Inc. or its affiliates.

Streaming Music

Listen to popular music applications and music stored on your device with basic audio controls.

Equipped with the Intuitive KENWOOD Music Mix

Up to 5 Bluetooth® devices can be connected to the receiver at the same time, allowing you to take turns streaming music with your friends and family.

Dual Phone Connection

While you are connected through Bluetooth, with a touch of a button you can switch between two phones.

Control the Receiver from Your Smartphone with the KENWOOD Remote App

A smartphone application can control most basic functions of the receiver over the Bluetooth connection of the paired phone (iPhone or Android).

Front USB and AUX Input Compatible with a Variety of USB-Enabled Devices

Easy front panel connection for your compatible USB- enabled devices. These include Mass Storage Class devices like iPods, smartphones, and USB flash drives. The USB input will allow you to charge and control the music playback of your select devices.

The Best Audio Experience

13-Band EQ / Digital Time Alignment

13-Band equalizer and DTA gives optimal tuning enhancements for the listener.

Playable USB Files

Compatible with a broad range of audio file formats from FLAC and WAV, to MP3, WMA and AAC.

Music Codec Playable up toFLAC～96kHz / ～24bitWAV～44.1kHz / ～16bitMP3～48kHz / ～320kbpsWMA～48kHz / ～192kbpsAAC～48kHz / ～320kbps

Digital Time Alignment

Sound coming from a variety of speakers located within your car are time aligned to arrive at your ear at exactly the same time.

Drive Equalizer

Drive EQ boosts specific frequencies in the audio signal to compensate the negative impact of road noise.

System EXPANSION Ready

The KENWOOD receiver has RCA outputs to expand the system to connect to an additional amplifier or powered subwoofer.

Additional Features

Match Your Mood with Variable Color Illumination

Bright variable color LEDs can be adjusted to match any color dash lighting.

Adjustable 3-Zone Variable Color Illumination

You can adjust the front panel illumination into 3 separate color zones.

200mm Escutcheon Included

 A 200mm escutcheon is included to help make the fit seamless in many of the latest model Japanese and other select cars. 

Equipped with Dual USB Ports

Play your music from one USB port and use the other to charge your device, or charge both at the same time.

SiriusXM Radio Ready

Access additional music, sports and entertainment content on the go with SiriusXM Radio.
(Optional SiriusXM tuner required, sold separately)

Built-in HD Radio Tuner

HD Radio has the best selection of local radio with amazing features and no monthly fees. HD Radio provides CD sound quality from digital FM stations and FM sound quality from digital AM stations. You can even access additional HD multicasting stations that are not available on traditional analog radio.

Spanish and French Text Display

On-screen display menu now available in Spanish and French.

VXA Mono Amplifiers offer a remote level control to adjust your bass right from the dash. Class-D mono channel for lower current draw and longer playing time

Class-Leading Power

• Mono power stable to 1 Ohm for louder bass

• Remote Bass Control for fingertip tuning

• Variable 12dB crossovers for ideal speaker matching

• 24dB subsonic filter for protection from potentially damaging frequencies

• KickEQ™ variable bass boost for louder low frequencies

• KICKER FIT™ (Fail-safe Integration Technology) means it works with nearly every radio

• Small footprint for easy installation

• Compatible with start/stop vehicle technology

• DC-offset automatic turn on

• Class SB-compatible for OEM integration within Class-SB head units

• Power Pack

  The VXA-Series Mono Amp is one-ohm stable, giving you even more power and wiring options for your system!  This Class-D VXA700.1 features a variable bass boost with KickEQ™, giving you as much as a 6dB of extra bump.

• Remote Ready

  VXA-Series Amplifiers with mono channels include the VXARC Remote Bass Knob. Use it to customize your bass on the fly with just a turn of a dial!

• Specifications

  Power (watts/ch), 1 Ohm Mono:700 x 1 Power (watts/ch), 2 Ohm Mono:500 x 1 Power (watts/ch), 4 Ohm Mono:250 x 1 Dynamic Power (watts):900 Frequency Response (Hz):10-200 (+0/-6dB) Dimensions (in, cm):Height: 2-3/16 (5.6 cm) Width: 5-29/32 (15 cm) Length: 8-15/16 (22.7 cm)

  Input Sensitivity:125mV-10V Signal-to-Noise Ratio:>95dB (A-weighted, re: rated power) Selectable Electronic Crossover:12dB/octave, variable LP 50-200Hz Subsonic Filter:fixed 15Hz, 24dB/octave KickEQ Bass Boost:variable 0-6dB @ 40Hz

• Warranty When purchased from an Authorized KICKER Dealer or kicker.com, KICKER warrants this product to be free from defects in material and workmanship under normal use for a period of TWO (2) YEARS from date of original purchase.

• 255 Segment 1.5 Line Text Display

• Amazon Alexa Ready

• Built-in HD Radio Tuner

• Dual USB

• Variable Color Illumination

• 13Band EQ & Digital Time Alignment

• Short Chassis

• 3 Preouts 5.0V

Amazon Alexa Compatible

With Alexa on your KENWOOD Receivers, you can use your voice to control your music and much more. Using Alexa is as easy as asking a question. Just ask and Alexa can play your favorite song, skip to the next track, change the volume, read you the news and more.

Using Alexa on the KENWOOD Receiver is simple and hands-free, just ask and Alexa will respond instantly, or press the Amazon Alexa key on the KENWOOD receiver, you can easily activate Alexa and get voice control.

*For more information, visit https://www.kenwood.com/car/app/amazon_alexa/eng/

 Amazon Alexa Key

Amazon, Alexa and all related logos are trademarks of Amazon.com, Inc. or its affiliates.

Streaming Music

Listen to popular music applications and music stored on your device with basic audio controls.

Equipped with the Intuitive KENWOOD Music Mix

Up to 5 Bluetooth® devices can be connected to the receiver at the same time, allowing you to take turns streaming music with your friends and family.

Dual Phone Connection

While you are connected through Bluetooth, with a touch of a button you can switch between two phones.

Control the Receiver from Your Smartphone with the KENWOOD Remote App

A smartphone application can control most basic functions of the receiver over the Bluetooth connection of the paired phone (iPhone or Android).

Front USB and AUX Input Compatible with a Variety of USB-Enabled Devices

Easy front panel connection for your compatible USB- enabled devices. These include Mass Storage Class devices like iPods, smartphones, and USB flash drives. The USB input will allow you to charge and control the music playback of your select devices.

The Best Audio Experience

13-Band EQ / Digital Time Alignment

13-Band equalizer and DTA gives optimal tuning enhancements for the listener.

Playable USB Files

Compatible with a broad range of audio file formats from FLAC and WAV, to MP3, WMA and AAC.

Music CodecPlayable up toFLAC～96kHz / ～24bitWAV～44.1kHz / ～16bitMP3～48kHz / ～320kbpsWMA～48kHz / ～192kbpsAAC～48kHz / ～320kbps

Digital Time Alignment

Sound coming from a variety of speakers located within your car are time aligned to arrive at your ear at exactly the same time.

Drive Equalizer

Drive EQ boosts specific frequencies in the audio signal to compensate the negative impact of road noise.

System EXPANSION Ready

The KENWOOD receiver has RCA outputs to expand the system to connect to an additional amplifier or powered subwoofer.

Additional Features

Match Your Mood with Variable Color Illumination

Bright variable color LED's can be adjusted to match any color dash lighting.

Equipped with Dual USB Ports

Play your music from one USB port and use the other to charge your device, or charge both at the same time.

Short Chassis Design

With audio receivers shorter in depth, installation is made easier in a wider range of cars.

SiriusXM Radio Ready

Access additional music, sports and entertainment content on the go with SiriusXM Radio.
(Optional SiriusXM tuner required, sold separately)

Built-in HD Radio Tuner

HD Radio has the best selection of local radio with amazing features and no monthly fees. HD Radio provides CD sound quality from digital FM stations and FM sound quality from digital AM stations. You can even access additional HD multicasting stations that are not available on traditional analog radio.

Spanish and French Text Display

On-screen display menu now available in Spanish and French.

The VXA600.5 5-Channel Amplifier is built to power an entire mobile-audio system, including your subwoofer! A VXARC Remote Bass Knob is included to dial in more bass.Class D design for lower current draw and longer playing time

• Bass channel lets one amp run an entire system

• Remote Bass Control included for fingertip tuning (sub channel)

• Variable 12dB crossovers for ideal speaker matching

• 24dB subsonic filter for protection from potentially damaging frequencies

• KickEQ™ variable bass boost for louder low frequencies

• KICKER FIT™ (Fail-safe Integration Technology) means it works with nearly every radio

• Small footprint for easy installation

• Compatible with start/stop vehicle technology

• DC-offset automatic turn on

• Class SB-compatible for OEM integration within Class-SB head units

• Five Channels of Fun

  The VXA600.5 Amplifier is built to be the complete package in one cool-looking amp.
  
  This amplifier uses powerful, ultra-efficient Class-D power for the full-range and mono channels. The amp also comes equipped with FIT™ (Fail-safe Integration Technology), giving you superior clarity and dependability.

• Remote Ready

  VXA-Series Amplifiers with mono channels include the VXARC Remote Bass Knob. Use it to customize your bass on the fly with just a turn of a dial!

• Specifications

  Power (watts/ch), 2 Ohm Stereo:75 x 4 Power (watts/ch), 4 Ohm Stereo:50 x 4 Power (watts/ch), 4 Ohm Bridged Mono:150 x 2 Power (watts/ch), 2 Ohm Mono:300 x 1 Power (watts/ch), 4 Ohm Mono:150 x 1 Dynamic Power (watts):750 Frequency Response (Hz):Amp1/2 10-20k (+0/-1dB); Sub 10-200 (+0/-6dB) Dimensions (in, cm):Height: 2-3/16 (5.6 cm) Width: 5-29/32 (15 cm) Length: 11-5/32 (28.3 cm) Input Sensitivity:125mV-10V Signal-to-Noise Ratio:Amp1/2 >95dB (A-weighted, re: rated power); Selectable Electronic Crossover:12dB/octave, AMP1/2: variable HP 10-200Hz; SUB: variable LP 50-200Hz Subsonic Filter (sub ch only):fixed 15Hz, 24dB/octave KickEQ Bass Boost (sub ch only):variable 0-6dB @ 40Hz

• Warranty When purchased from an Authorized KICKER Dealer or kicker.com, KICKER warrants this product to be free from defects in material and workmanship under normal use for a period of TWO (2) YEARS from date of original purchase.

• 255 Segment 1.5 Line Text Display

• Amazon Alexa Ready

• Built-in HD Radio Tuner

• Bluetooth Direct Access Button

• Variable Color Illumination

• 13Band EQ & Digital Time Alignment

• Front USB & AUX IN

• 3 Preouts 5.0V

Amazon Alexa Compatible

With Alexa on your KENWOOD Receivers, you can use your voice to control your music and much more. Using Alexa is as easy as asking a question. Just ask and Alexa can play your favorite song, skip to the next track, change the volume, read you the news and more.

Using Alexa on the KENWOOD Receiver is simple and hands-free, just ask and Alexa will respond instantly, or press the Amazon Alexa key on the KENWOOD receiver, you can easily activate Alexa and get voice control.

*For more information, visit https://www.kenwood.com/car/app/amazon_alexa/eng/

 Amazon Alexa Key

Amazon, Alexa and all related logos are trademarks of Amazon.com, Inc. or its affiliates.

Streaming Music

Listen to popular music applications and music stored on your device with basic audio controls.

Equipped with the Intuitive KENWOOD Music Mix

Up to 5 Bluetooth® devices can be connected to the receiver at the same time, allowing you to take turns streaming music with your friends and family.

Dual Phone Connection

While you are connected through Bluetooth, with a touch of a button you can switch between two phones.

Control the Receiver from Your Smartphone with the KENWOOD Remote App

A smartphone application can control most basic functions of the receiver over the Bluetooth connection of the paired phone (iPhone or Android).

Front USB and AUX Input Compatible with a Variety of USB-Enabled Devices

Easy front panel connection for your compatible USB- enabled devices. These include Mass Storage Class devices like iPods, smartphones, and USB flash drives. The USB input will allow you to charge and control the music playback of your select devices.

The Best Audio Experience

13-Band EQ / Digital Time Alignment

13-Band equalizer and DTA gives optimal tuning enhancements for the listener.

Playable USB Files

Compatible with a broad range of audio file formats from FLAC and WAV, to MP3, WMA and AAC.

Music CodecPlayable up toFLAC～96kHz / ～24bitWAV～44.1kHz / ～16bitMP3～48kHz / ～320kbpsWMA～48kHz / ～192kbpsAAC～48kHz / ～320kbps

Digital Time Alignment

Sound coming from a variety of speakers located within your car are time aligned to arrive at your ear at exactly the same time.

Drive Equalizer

Drive EQ boosts specific frequencies in the audio signal to compensate the negative impact of road noise.

System EXPANSION Ready

The KENWOOD receiver has RCA outputs to expand the system to connect to an additional amplifier or powered subwoofer.

Additional Features

Match Your Mood with Variable Color Illumination

Bright variable color LED's can be adjusted to match any color dash lighting.

SiriusXM Radio Ready

Access additional music, sports and entertainment content on the go with SiriusXM Radio.
(Optional SiriusXM tuner required, sold separately)

Built-in HD Radio Tuner

HD Radio has the best selection of local radio with amazing features and no monthly fees. HD Radio provides CD sound quality from digital FM stations and FM sound quality from digital AM stations. You can even access additional HD multicasting stations that are not available on traditional analog radio.

Spanish and French Text Display

On-screen display menu now available in Spanish and French.

The VXA300.4 Four-Channel Amplifier is built to power all your door speakers in a single, powerful package.

• Class-Leading Power

  • Class D full-range channels for lower current draw and longer playing time

  • Variable 12dB crossovers for ideal speaker matching

  • KickEQ™ variable bass boost for louder low frequencies

  • KICKER FIT™ (Fail-safe Integration Technology) means it works with nearly every radio

  • Small footprint for easy installation

  • Compatible with start/stop vehicle technology

  • DC-offset automatic turn on

  • Class SB-compatible for OEM integration within Class-SB head units

• Flexible and Fun

  This KICKER amp features a variable bass boost with KickEQ™, giving you as much as a 6dB of extra bump.  KICKER’s FIT™ (Fail-safe Integration Technology), gives you outstanding noise rejection - even with premium factory audio systems.

• Specifications

  Power (watts/ch), 2 Ohm Stereo:75 x 4 Power (watts/ch), 4 Ohm Stereo:50 x 4 Power (watts/ch), 4 Ohm Bridged Mono:150 x 2 Dynamic Power (watts):350 Frequency Response (Hz):10-20k(+0/-1dB) Dimensions (in, cm):Height: 2-3/16 (5.6 cm) Width: 5-29/32 (15 cm) Length: 8-25/32 (22.3 cm)

  Input Sensitivity:125mV-10V Signal-to-Noise Ratio:>95dB (A-weighted, re: rated power) Selectable Electronic Crossover:Off/HP/LP, variable 50-200Hz @ 12dB/octave KickEQ Bass Boost:variable 0-6dB @ 40Hz

• Warranty When purchased from an Authorized KICKER Dealer or kicker.com, KICKER warrants this product to be free from defects in material and workmanship under normal use for a period of TWO (2) YEARS from date of original purchase.

XAV-AX8500 | 25.7 cm (10.1 in) Digital Multimedia Receiver

A digital multimedia receiver that features a 10.1 in (25.7 cm) capacitive HD touchscreen with an updated display joint featuring a new tilt and swivel mechanism. Plus, wireless and wired connectivity to your smartphone, and sound customization.

High-definition capacitive touchscreen

A large floating 10.1 in (25.7 cm) capacitive touchscreen with 1280 x 720-pixel high resolution offers crisp detail, higher brightness and contrast for superior in-car experience.

Gapless Anti-glare Display

Unlike a conventional display, the LCD is bonded directly to the protective glass touch layer with a transparent adhesive. The result is an extremely precise touch experience along with enhanced contrast and visual performance. The internal anti-glare filter hugely improves touchscreen visibility by reducing sunlight reflections, ensuring easier and safer driving. LEFT image: Display device with no anti-glare filter. RIGHT image: Display device with anti-glare filter.

Customizable viewing angle for every journey

The display joint allows you to manually tilt and swivel the display-both at ±15 degrees-to suit your personal preference. This range of movement allows you to not only alter the angle according to your preferred seating position, but also to avoid things like reflection of the direct sunlight, or to share the navigation screen with your passengers.

How it works

The screw-less tilt and swivel mechanism is designed to be easily adjusted without tools yet remain static and stable even under harsh vehicle vibration.

Enhanced wireless audio streaming with LDAC™

Enjoy the convenience of Bluetooth®wireless audio and exceptional sound quality thanks to LDAC. Connect compatible devices to stream audio at 96 kHz/24-bit with bitrates up to 3x higher (990 kbps) than conventional Bluetooth.

3-camera trigger inputs

You can see the images of up to three connected cameras when you shift the vehicle's transmission lever to the reverse position or tap the dedicated icons on the home screen. By utilizing the supplied trigger wires, each camera image can be switched on and off, or from one to another automatically by detecting the vehicle's turn signals or sensing compatible signals such as that for a connected front camera. An adjustable parking guide is also available for reverse gear.

Connected to your car

IDatalink® Maestro® compatibility connects the XAV-AX8500 to your vehicle's onboard computer, turning it into a customized display for factory-equipped functions and features. With an iDatalink® Maestro® RR by Automotive Data Solutions you can interface with vehicle infotainment and information-for performance, safety and comfort-directly on the 10.1 inch touchscreen.

SiriusXM® Radio Ready

Connect your SiriusXM®Radio satellite tuner (not supplied) to enjoy commercial-free music, sports, news and entertainment.

HD Graphical User Interface

The 1280 x 720 HD touchscreen offers an enhanced user interface for safety and ease of use. It features a clean design with customizable icon positioning and wallpaper to suit your vehicle and style.

Safer, easier operation

The button design features large keys to seamlessly fit with the sleek display. Access volume, source, sound settings and voice control, for safe and easy operation on the road.

Single-DIN chassis for your flexible installation

Despite its huge screen, the main unit is packed in a single-DIN chassis for flexible installation in both single and double-DIN dashboards, while still leaving plenty of room for cables and harnesses when installed in double-DIN vehicles.

Environment in mind

Our products are not only designed to be stylish, but also with the environment in mind. For the individual packaging of the XAV-AX8500, 90% of the cushions are made of paper materials, and compared to the prior model, printed information has been carefully considered for simplicity and length to reduce printer ink usage by approximately 80%, reflecting Sony's commitment to reducing environmental impact.

Bluetooth® Profile

A2DP

Yes (1.3.1)

AVRCP

Yes (1.6.1)

HFP

Yes (1.7.1)

PBAP

Yes (1.1)

Bluetooth® Feature

External Microphone

Supplied

Alphabetical Phonebook Sorting

Yes

Battery Reminder

Yes

Call Volume Level Control

Yes

Last Dialed Call

Yes (select from the dialed call history)

Phonebook Access via PBAP

Yes

Recent Calls (# of)

Yes

Ring Volume Level Control

Yes

Signal Strength Indication

Yes

Speed Dial

Yes (6 memories)

Bluetooth® Audio Feature

Audio Level Adjustment

Yes (–6 dB to +6 dB)

Pause (Bluetooth Audio)

Yes

Track +/-

Yes

Audio Codec (Bluetooth Audio)

SBC/AAC/LDAC

Yes

Group (Folder) +/-

Yes

Meta Data Indication

Yes

Repeat Control (Audio Device side)

Yes

Shuffle Control (Audio Device side)

Yes

USB Mass Storage Device Control Feature

USB Device Control (Audio Codec)

MP3/WMA/WAV/AAC/FLAC/ALAC/DSF/DSDIFF

USB Device Control (Pause)

Yes

USB Device Control (Repeat)

TRACK/FOLDER/DRIVE

USB Device Control (Resume Play)

Yes

USB Device Control (Shuffle)

OFF/FOLDER/DEVICE

USB Device Control (Video Codec)

ASF/WMV/AVI/MKV/MPEG-4

USB device control (audio playable file extension)

.mp3/.wma/.wav/.m4a/.mp4/.flac/.m4a/.mp4/.dsf/.dff

USB device control (video playable file extension)

.asf/.wmv/.avi/.mkv/.mp4

User Interface

Parking Control

Yes

Rear View Camera-In Marker Setting

Yes

Touch Panel

Yes/Capacitive

Parking Line Adjust

Yes

Multi-Language

Menu

English/Spanish/French/German/Italian/Russian/Portuguese/Simplified Chinese/Traditional Chinese/Korean/Dutch

Caution

English/Spanish/French/German/Italian/Russian/Portuguese/Simplified Chinese/Traditional Chinese/Korean/Dutch

Monitor(AVC)

Brightness

425 cd/m2

Dimmer

Auto/Manual select

LCD Type

TFT Active Matrix

Resolution (DOT)

1280 x 720

Screen Aspect

16:9

SCREEN DIAGONAL (INCH/CM)

10.1 inches/25.7 cm

Display Panel

Dimmer Adjust

Yes

Tuner Features

Preset

FM18/AM12

Auto Memory

BTM

Yes (RBDS)

Panel Design

Key Illumination

Yes (White)

Size & Weight

Dimensions (W x H x D)

269 x 167 x 258 mm

Weight

2.6 kg

General Features

Pre Out

5V 3-Pre (Front LR / Rear LR / Sub x 1)

USB

Yes (Type-C x 1, REAR)

Output Power

55 W x4

Equalizer

14-band Equalizer

Firmware upgradability

Yes

Rear View Camera in

Rear/Input 1/Input 2

Time Alignment

Yes

Album artwork Indication

Yes

8.95 in (22.7 cm) Digital Media Receiver with WebLink™ Cast

Access information and entertainment on the road with ease with the XAV-AX8100 Media Receiver. Despite the single-DIN installation, a huge 8.95 in (22.7 cm) display puts smart connectivity, useful navigation and stunning sound quality in easy reach. Newly added HDMI connectivity allows you to hook up an external audio and visual source device.

Oversized touchscreen offers everything at a glance

Whether you are getting directions, looking for a song on your smartphone, or customizing your sound, the oversized 8.95 in (22.7 cm) anti-glare touchscreen makes everything easy to see at a glance, for safer use on the road.

Smarter driving with intelligent voice control

Connect your smartphone to the XAV-AX8100 media receiver and speak through the supplied microphone. Voice control makes it safer and easier than ever to navigate, communicate and play music on the road.

Voice Control with Android Auto

Use voice commands to dictate messages, take phone calls or get help from Google Maps. You can even control music playback, just by talking.

Siri with Apple CarPlay

Easily access the iPhone features you know and love, just by talking to Siri. Music, maps, phone calls and messages are all under your control.

WebLink™ Cast4 compatible

WebLink™is a lightweight app delivery platform designed especially for in-vehicle use. Using the Android or iOS device connection, it is now possible to mirror your smartphone screen right on the car audio display-for reliable, responsive infotainment anytime on the road.

Hear music your way

Multiple customization options let you adapt the audio experience to your liking. And with the built-in 4 x 55 W amplification, music sounds clear even at high volumes.

Navigating with Android Auto

Use Google Maps to get directions and traffic updates whenever you need them.

Powerful, clear amplification with Dynamic Reality Amp 2

Advanced signal processing from the 4 x 55 W Dynamic Reality Amp 2 removes interference, so music sounds clear and detailed. Even when you crank up the volume.

Music that jumps from your dashboard

Sound waves are directional, so if your speakers are in your doors or under your dashboard, the audio may seem muddy or unclear. Dynamic Stage Organizer adjusts the signal, improving the stereo positioning so music sounds like it's coming from the dashboard.

Sculpt your sound with 10-band graphic equalizer

Tailor the sound to your personal preference with the 10-band graphic equalizer.

Simple button controls

Get instant access to commonly used features such as volume, source, sound settings and voice control, for safe and easy operation on the road.

Build your own sound system

With the three 5x volt pre-outs, you can add components of your choice, like extra amplifiers and subwoofers.

Rear view camera ready

Have a rear camera installed? View its feed through the screen, along with customizable guidelines that help you back in safely.

FLAC-compatible

FLAC compatibility lets you play lossless audio files, so you can enjoy every detail of the music5.

Quick Wake up6

With Sony Quick Wake Up, you're ready to go right after turning on the ignition.

BLUETOOTH® wireless technology

Make hands-free calls and stream wireless audio from your smartphone with Bluetooth®.

SiriusXM® Radio ready

Connect your SiriusXM® Radio satellite tuner (not supplied) to enjoy commercial-free music, sports, news, and entertainment.

Specifications

Bluetooth® Profile

A2DP

Yes (1.3)

AVRCP

Yes (1.3)

HFP

Yes (1.6)

PBAP

Yes (1.1)

Bluetooth® Feature

External Microphone

Yes

Alphabetical Phonebook Sorting

Yes

Battery Reminder

Yes

Call Volume Level Control

Yes

Last Dialed Call

Yes (select from the dialled call history)

Phonebook Access via PBAP

Yes

Recent Calls (# of)

Yes

Ring Volume Level Control

Yes

Signal Strength Indication

Yes

Speed Dial

Yes (6 memories)

Bluetooth® Audio Feature

Audio Level Adjustment

Yes (-8 dB to +18 dB)

Pause (Bluetooth Audio)

Yes

Track +/-

Yes

Audio Codec (Bluetooth Audio)

SBC / AAC

Yes

Group (Folder) +/-

Yes

Meta Data Indication

Yes

Repeat Control (Audio Device side)

Yes

Shuffle Control (Audio Device side)

Yes

USB Mass Storage Device Control Feature

USB Device Control (Audio Codec)

PCM/MP3/WMA/AAC/FLAC

USB Device Control (Pause)

Yes

USB Device Control (Repeat)

TRACK/FOLDER/DRIVE

USB Device Control (Resume Play)

Yes

USB Device Control (Shuffle)

OFF/FOLDER/DEVICE

USB Device Control (Video Codec)

MPEG4-SP/AVC (H.264 Baseline)/WMV/FLV/MKV/XviD

USB device control (audio playable file extension)

.wav/.mp3/.wma/.m4a/.flac

USB device control (video playable file extension)

.mp4/.wmv/.mkv

User Interface

Aspect Ratio Select

Yes

Gesture Command

Yes

Parking Control

Yes

Rear View Camera-In Marker Setting

Yes

Remote Commander

RM-X170

Touch Panel

Resistive + AG

Parking Line Adjust

Yes

Multi-Language

ID3 Tag

English/Spanish/French/German/Italian/Russian/Portuguese/Thai/Simplified Chinese/Traditional Chinese/Korean/Arabic/Indonesian

Menu

English/Spanish/French/German/Italian/Russian/Portuguese/Thai/Simplified Chinese/Traditional Chinese/Korean/Arabic/Indonesian

Caution

English/Spanish/French/German/Italian/Russian/Portuguese/Thai/Simplified Chinese/Traditional Chinese/Korean/Arabic/Indonesian

Monitor(AVC)

Brightness

400 cd / m2

Contrast Ratio

500

Dimmer

Yes

LCD Type

TFT Active Matrix

Resolution (DOT)

800 x 480

Screen Aspect

16:9

SCREEN DIAGONAL (INCH/CM)

8.95 inch

Display Panel

Dimmer Adjust

Yes

Key Illumination Initial

Yes (White)

Connectivity

Bluetooth®

Yes

Tuner Features

Preset

FM18 / AM12

Auto Memory

BTM

Yes (RBDS)

Panel Design

Key Illumination

Yes (White)

Panel Surface Finish Color

Black

Size & Weight

Dimensions (W x H x D)

229 x 136 x 253 mm

Weight

2.4 kg

General Features

Pre Out

3 Pre (Front/Rear/Sub x 1)

USB

Yes (Rear x1)

DSO (Dynamic Stage Organizer)

Yes

EXTRA BASS

Yes (Off/1/2)

Output Power

55 W x4

Equalizer

10-band Graphic Equalizer

Firmware upgradability

Yes

Rear View Camera in

Yes

Album artwork Indication

Yes

• Excelon product offer 2 years of warranty

• 255 Segment 1.5 Line Text Display

• Amazon Alexa Ready

• Bluetooth Direct Access Button

• Variable Color Illumination

• 13Band EQ & Digital Time Alignment

• Front USB & AUX IN

• 3 Preouts 5.0V

• 255 Segment 1.5 Line Text Display

• Amazon Alexa Ready

• Bluetooth Direct Access Button

• Variable Color Illumination

• 13Band EQ & Digital Time Alignment

• Front USB & AUX IN

• 3 Preouts 2.5V

• 255 Segment 1.5 Line Text Display

• Amazon Alexa Ready

• 13 Band EQ & Digital Time Alignment

• Bluetooth Direct Access Button

• Variable Color Illumination

• Front USB & AUX In

• 3 Preouts 2.5V

The KSS369 3-Way Component Speaker System mounts effortlessly in select domestic and import models, thanks to an ultra-thin speaker design and slimline crossover. Together, the system combines to become a perfectly melded trio of acoustic perfection.

• Fits GM, Ford, Chrysler, Jeep, Dodge and Select Imports

• Concert-Level Realism and Volume

• Optimized In-line 12dB Crossover Network Included

• Ultra-Thin Speaker Design

• Uses Factory Holes and Mounting Points

• 6 x 9-inch woofers with EVC and powerful magnets

• Angled, Surface and Flush Tweeter Mounting Options

• Three Mounting Backets Included for 2-3/4 Midrange

• Bi-amp a 3-Way Component front stage with a KICKER KEY200.4 Smart Amp!

The system has a recommended power rating of 100 watts RMS. See below for more details.

Specifications

Model 51KSS369 Woofer (in, mm) 6x9, 160x230 Midrange (in, mm) 2-3/4, 70 Tweeter (in, mm)1, 25 Impedance (Ohms) 4 Rec. Amplifier Power (watts) 15-100

Peak Power (watts) 200 Sensitivity (dB 1w/1m) 92Frequency Response (Hz)30-21k Woofer Mounting Hole Diameter (in, mm) 5-11/16x8-7/16, 144x215 Woofer Mounting Depth (in, mm)3-3/16, 81 Woofer Grilles Included No

The KSS365 3-Way Component Speaker System mounts effortlessly in select domestic and import models, thanks to an ultra-thin speaker design and slimline crossover. Together, the system combines to become a perfectly melded trio of acoustic perfection.

• Fits GM, Ford, Chrysler, Jeep, Dodge and Select Imports

• Concert-Level Realism and Volume

• Optimized In-line 12dB Crossover Network Included

• Ultra-Thin Speaker Design

• Uses Factory Holes and Mounting Points

• 6.5-inch woofers with EVC and powerful magnets

• Angled, Surface and Flush Tweeter Mounting Options

• Three Mounting Backets Included for 2-3/4 Midrange

• Bi-amp a 3-Way Component front stage with a KICKER KEY200.4 Smart Amp!

The system has a recommended power rating of 15-80 watts RMS. See below for more details.

Specifications

Model 51KSS365 Woofer (in, mm)6-1/2, 160 Midrange (in, mm) 2-3/4, 70 Tweeter (in, mm)1, 25 Impedance (Ohms)4 Rec. Amplifier Power (watts)15-80

Peak Power (watts) 160Sensitivity (dB 1w/1m) 91 Frequency Response (Hz) 35-21k Woofer Mounting Hole Diameter (in, mm)4-1/2, 115 Woofer Mounting Depth (in, mm)1-13/16, 46 Woofer Grilles Included Yes

What's in the Box?

6.5” KSS WOOFER Qty: 26.5” KSS GRILLE BEZEL Qty: 26.5” KSS GRILLE Qty: 26.5”/6.75” KS MOUNTING ADAPTER Qty: 26.5” KS MOUNTING TEMPLATE Qty: 251KSS 6.5”/6”x9” MID-BASS WOOFER CROSSOVER Qty: 2 FOAM DAMPENER FOR MOUNTING ADAPTER Qty: 22.75” KSC2704 MID-RANGE/TWEETER Qty: 2 JEEP JL FLANGE Qty: 2JEEP JL RETAINER Qty: 2GM/CHRYSLER FLANGE Qty: 2 GM/CHRYSLER RETAINER Qty: 2SUBARU/TOYOTA FLANGE Qty: 2 SUBARU/TOYOTA RETAINER Qty: 251KSS 6.5” 2.75” MID-RANGE/TWEETER CROSSOVER Qty: 2

1” KST TWEETER Qty: 2FLUSH MOUNT TWEETER RING Qty: 2 UPPER ANGLE TWEETER RING Qty: 2 LOWER ANGLE TWEETER RING Qty: 2 ANGLE MOUNT TWEETER NUT Qty: 2 FLUSH MOUNT TWEETER NUT Qty: 2 TWEETER POD ASSEMBLY Qty: 2 TWEETER TIGHTENING TOOL Qty: 151KSS 6.5”/6”x9” 1” KST TWEETER CROSSOVER Qty: 2BUTT CONNECTOR Qty: 12 MOUNTING SCREW Qty: 12 CABLE TIE Qty: 2CUSTOMER INFORMATION CARD Qty: 1BLACK ADHESIVE Qty: 2

KICKER KS-Series Speakers let you play at concert-like volume, yet maintain the smoothness and subtlety to please even the most selective ear. Internally dampened polypropylene cones and durable rubber surrounds assist the woofers in creating precise midrange and bass, while high-quality silk-dome tweeters deliver natural, detailed highs.

Experience your music as a component system with separate tweeters, or as a high-end coaxial system. The woofers’ removable bullet-style phase plug is replaced with a special adapter, allowing the 25 millimeter, silk-dome tweeters to rotate and tilt. You get more system design options and superior off-axis performance. They work best with 15 to 125 watts of recommended power. See below for more details.

• High power handling

• Silk-dome tweeters for a smooth sound

• Polypropylene woofer and tough rubber surrounds

• Thin-mount design easily fits behind factory grilles

• Four tweeter mounting options

• Articulating tweeter pod included

• Smaller crossover makes mounting even easier

• Grilles included

Woofer [in, mm]6x9, 160x230 Tweeter [in,mm]1, 25Dome Material Silk Rated Impedance [Ω]4 Recommended Amplifier Power [Watts RMS] 15-150 Sensitivity [1W, 1m] 92 Frequency Response [Hz] 35-21k

Woofer Mounting Hole Diameter [in, mm]5-5⁄8x8-7⁄16, 143x215 Woofer Top Mount Depth [in, mm]2-15/16, 75 Woofer Bottom Mount Depth [in, mm]3-3/16, 81 Flush Mount Tweeter Hole Diameter [in,mm] 1-¾, 45 Flush Mount Tweeter Depth [in,mm] 11⁄16 , 17 High Pass [dB], at Frequency [Hz]12, 4,000Low Pass [dB], at Frequency [Hz]High Frequency Output Attenuation [dB] 0, 4.5, 9 Warranty When purchased from an Authorized KICKER Dealer or kicker.com, KICKER warrants this product to be free from defects in material and workmanship under normal use for a period of TWO (2) YEARS from date of original purchase.

The KSS269 high-performance component upgrade system is made-to-fit with a pair of 6 x 9-inch woofers and 2.75-inch mid/tweeters, a larger size which is required in many of today’s factory speaker locations.

Also included are three custom bracketing options, built specifically for a drop-in fit in GM, Ford, Chrysler, Jeep, Dodge and select Asian import factory-speaker locations. A convenient in-line crossover network is also included with every KS system for versatile fitment in most any door or dash location.

KICKER KS-Series speakers let you play at concert-like volume, yet maintain the smoothness and subtlety to please even the most selective ear. They work best with 15-to-100 watts of recommended power. See below for more details.

• High power handling

• Tough UV-treated surrounds

• In-line crossovers included

• Thin-mount design easily fits behind factory grilles

• Brackets included for select GM/Ford/Chrysler/Dodge/Jeep and Asian imports

Specifications

Woofer [in, mm]6x9, 160x230 Tweeter [in, mm]2-3/4, 70Tweeter Dome Material Silk Rated Impedance [Ω]4Recommended Amplifier Power [Watts RMS]100Sensitivity [1W, 1m]92

Frequency Response [Hz]30-20k Woofer Mounting Hole Diameter [in, mm] 5-11/16x8-7/16, 144x215 Woofer Bottom Mount Depth [in, mm]3-3/16, 81 Flush Mount Tweeter Hole Diameter [in,mm] 2-5/8, 67 Flush Mount Tweeter Depth [in,mm] 1-1/4, 32 Warranty When purchased from an Authorized KICKER Dealer or kicker.com, KICKER warrants this product to be free from defects in material and workmanship under normal use for a period of TWO (2) YEARS from date of original purchase.

What's in the Box?

KSC27 SPEAKER Qty: 2 SPEEDNUT Qty: 12PAN HEAD PHILLIPS WOODSCREW M4x27mmQty: 12 BUTT CONNECTOR Qty: 8KSS269-35XO CROSSOVER Qty: 2KSS690 WOOFER Qty: 2KS69 BACK GASKET Qty: 2KSS269-69XO CROSSOVER Qty: 2KS69 MOUNTING TEMPLATE Qty: 2

KS69 ADAPTER

Qty: 2110mmX30mmX1.5mm FOAM Qty: 2JEEP JL FLANGE Qty: 2JEEP JL RETAINER Qty: 2SUBARU/TOYOTA FLANGE Qty: 2 SUBARU/TOYOTA RETAINER Qty: 2GM/CHRYSLER FLANGE Qty: 2GM/CHRYSLER RETAINER Qty: 2CIC Qty: 1

KICKER KS-Series Speakers let you play at concert-like volume, yet maintain the smoothness and subtlety to please even the most selective ear. Internally dampened polypropylene cones and durable rubber surrounds assist the woofers in creating precise midrange and bass, while high-quality silk-dome tweeters deliver natural, detailed highs.

Experience your music as a component system with separate tweeters, or as a high-end coaxial system. The woofers’ removable bullet-style phase plug is replaced with a special adapter, allowing the 25 millimeter, silk-dome tweeters to rotate and tilt. You get more system design options and superior off-axis performance. They work best with 15 to 125 watts of recommended power. See below for more details.

• High power handling

• Silk-dome tweeters for a smooth sound

• Polypropylene woofer and tough rubber surrounds

• Thin-mount design easily fits behind factory grilles

• Four tweeter mounting options

• Articulating tweeter pod included

• Smaller crossover makes mounting even easier

Specifications

Woofer [in, mm] 6x8, 160x200Tweeter [in,mm] 1, 25Dome Material Silk Rated Impedance [Ω]4 Recommended Amplifier Power [Watts RMS]15-125Sensitivity [1W, 1m] 91 Frequency Response [Hz]35-21k

Woofer Mounting Hole Diameter [in, mm]5x7-1⁄8, 127x182 Woofer Bottom Mount Depth [in, mm]2-¼, 58Flush Mount Tweeter Hole Diameter [in,mm] 1-¾, 45 Flush Mount Tweeter Depth [in,mm] 11⁄16 , 17High Pass [dB], at Frequency [Hz]12, 4,000Low Pass [dB], at Frequency [Hz]High Frequency Output Attenuation [dB]0, 4.5, 9 Warranty When purchased from an Authorized KICKER Dealer or kicker.com, KICKER warrants this product to be free from defects in material and workmanship under normal use for a period of TWO (2) YEARS from date of original purchase.

KICKER KS-Series Speakers let you play at concert-like volume, yet maintain the smoothness and subtlety to please even the most selective ear. Internally dampened polypropylene cones and durable rubber surrounds assist the woofers in creating precise midrange and bass, while high-quality silk-dome tweeters deliver natural, detailed highs.

Experience your music as a component system with separate tweeters, or as a high-end coaxial system. The woofers’ removable bullet-style phase plug is replaced with a special adapter, allowing the 25 millimeter, silk-dome tweeters to rotate and tilt. You get more system design options and superior off-axis performance. They work best with 15 to 125 watts of recommended power. See below for more details.

• High power handling

• Silk-dome tweeters for a smooth sound

• Polypropylene woofer and tough rubber surrounds

• Thin-mount design easily fits behind factory grilles

• Four tweeter mounting options

• Articulating tweeter pod included

• Smaller crossover makes mounting even easier

• Grilles included

Specifications

Woofer [in, mm] 6-¾, 165Tweeter [in,mm] 1, 25 Dome Material Silk Rated Impedance [Ω]4 Recommended Amplifier Power [Watts RMS]15-125Sensitivity [1W, 1m]91Frequency Response [Hz]35-21k

Woofer Mounting Hole Diameter [in, mm]5-9⁄16 , 141 Woofer Bottom Mount Depth [in, mm]1-13⁄16 , 46 Flush Mount Tweeter Hole Diameter [in,mm] 1-¾, 45Flush Mount Tweeter Depth [in,mm] 11⁄16 , 17High Pass [dB], at Frequency [Hz]12, 4,000Low Pass [dB], at Frequency [Hz]High Frequency Output Attenuation [dB]0, 4.5, 9 Warranty When purchased from an Authorized KICKER Dealer or kicker.com, KICKER warrants this product to be free from defects in material and workmanship under normal use for a period of TWO (2) YEARS from date of original purchase.

KICKER KS-Series Speakers let you play at concert-like volume, yet maintain the smoothness and subtlety to please even the most selective ear. Internally dampened polypropylene cones and durable rubber surrounds assist the woofers in creating precise midrange and bass, while high-quality silk-dome tweeters deliver natural, detailed highs.

Experience your music as a component system with separate tweeters, or as a high-end coaxial system. The woofers’ removable bullet-style phase plug is replaced with a special adapter, allowing the 25 millimeter, silk-dome tweeters to rotate and tilt. You get more system design options and superior off-axis performance. They work best with 15 to 125 watts of recommended power. See below for more details.

• High power handling

• Silk-dome tweeters for a smooth sound

• Polypropylene woofer and tough rubber surrounds

• Thin-mount design easily fits behind factory grilles

• Four tweeter mounting options

• Articulating tweeter pod included

• Smaller crossover makes mounting even easier

• Grilles included

Specifications

Woofer [in, mm]6-½, 160Tweeter [in,mm] 1, 25Dome Material Silk Rated Impedance [Ω]4 Recommended Amplifier Power [Watts RMS]15-125 Sensitivity [1W, 1m]90Frequency Response [Hz]35-21k

Woofer Mounting Hole Diameter [in, mm] 4-13⁄16 , 123 Woofer Bottom Mount Depth [in, mm]1-13⁄16 , 46Flush Mount Tweeter Hole Diameter [in,mm] 1-¾, 45 Flush Mount Tweeter Depth [in,mm] 11⁄16 , 17High Pass [dB], at Frequency [Hz]12, 4,000Low Pass [dB], at Frequency [Hz]High Frequency Output Attenuation [dB]0, 4.5, 9 Warranty When purchased from an Authorized KICKER Dealer or kicker.com, KICKER warrants this product to be free from defects in material and workmanship under normal use for a period of TWO (2) YEARS from date of original purchase

KICKER® KS-Series Speakers let you play at concert-like volume, yet maintain the smoothness and subtlety to please even the most selective ear. Internally dampened polypropylene cones and durable rubber surrounds assist the woofers in creating precise midrange and bass, while high-quality silk-dome tweeters deliver natural, detailed highs.

Experience your music as a component system with separate tweeters, or as a high-end coaxial system. The woofer's removable bullet-style phase plug is replaced with a special adapter, allowing the 25 millimeter, silk-dome tweeters to rotate and tilt. You get more system design options and superior off-axis performance. They work best with 15 to 100 watts of recommended power. See below for more details.

• High power handling

• Silk-dome tweeters for a smooth sound

• Polypropylene woofer and tough rubber surrounds

• Thin-mount design easily fits behind factory grilles

• Four tweeter mounting options

• Articulating tweeter pod included

• Smaller crossover makes mounting even easier

• Grilles included

Specifications

Woofer [in, mm]5-¼, 130Tweeter [in,mm] 1, 25Dome Material Silk Rated Impedance [Ω] 4Recommended Amplifier Power [Watts RMS] 15-100Sensitivity [1W, 1m] 88Frequency Response [Hz] 38-21k

Woofer Mounting Hole Diameter [in, mm]4-½, 115 Woofer Bottom Mount Depth [in, mm]1-¾, 45Flush Mount Tweeter Hole Diameter [in,mm] 1-¾, 45 Flush Mount Tweeter Depth [in,mm] 11⁄16 , 17High Pass [dB], at Frequency [Hz]12, 4,000Low Pass [dB], at Frequency [Hz] High Frequency Output Attenuation [dB]0, 4.5, 9 Warranty When purchased from an Authorized KICKER Dealer or kicker.com, KICKER warrants this product to be free from defects in material and workmanship under normal use for a period of TWO (2) YEARS from date of original purchase.

Potent Performance

KICKER KS-Series Speakers let you play at concert-like volume, yet maintain the smoothness and subtlety to please even the most selective ear. Internally dampened polypropylene cones and durable rubber surrounds assist the woofers in creating precise midrange and midbass, while high-quality silk-dome tweeters deliver natural, detailed highs.

With less than a 2.5-inch mounting depth and zero tweeter protrusion, the KSC4100 is a perfect fit in almost every vehicle on the road today. They work best with 15 to 75 watts of recommended power. See below for more details.

• High power handling

• Silk-dome tweeters for a smooth sound

• Polypropylene woofer and tough rubber surrounds

• Thin-mount design easily fits behind factory grilles

Specifications

Speaker Design 2-WayWoofer [in, mm]4x10, 100x250 Tweeter [in, mm]½, 13 Rated Impedance [Ω]4Recommended Amplifier Power [Watts RMS] 15-75Sensitivity [1W, 1m]88 Frequency Response [Hz]45-20k Mounting Hole Diameter [in, mm]3-7/8 x 9-3/8, 99 x 238

Top Mount Depth [in, mm]2-3/8, 61 Bottom Mount Depth [in,mm]2-13/16, 71 Tweeter Protrusion [in,mm]0, 1 Grilles No Tweeter Magnet Material Neodymium Tweeter Dome Material Silk Woofer Cone Material Polypropylene Woofer Surround Material Rubber Warranty When purchased from an Authorized KICKER Dealer or kicker.com, KICKER warrants this product to be free from defects in material and workmanship under normal use for a period of TWO (2) YEARS from date of original purchase

Potent Performance

KICKER KS-Series Speakers let you play at concert-like volume, yet maintain the smoothness and subtlety to please even the most selective ear. Internally dampened polypropylene cones and durable rubber surrounds assist the woofers in creating precise midrange and midbass, while high-quality silk-dome tweeters deliver natural, detailed highs.

With less than a 3-inch mounting depth and just three millimeters of tweeter protrusion, the KSC6930 3-Way is a perfect fit in almost every vehicle on the road today. They work best with 15 to 150 watts of recommended power. See below for more details.

• High power handling

• Silk-dome tweeters for a smooth sound

• Polypropylene woofer and tough rubber surrounds

• Thin-mount design easily fits behind factory grilles

• Grilles included

Specifications

Speaker Design 3-WayWoofer [in, mm]6 x 9, 160 x 230 Midrange [in, mm]1, 25Tweeter [in, mm]3/4, 20Rated Impedance [Ω]4 Recommended Amplifier Power [Watts RMS] 15-150Sensitivity [1W, 1m]92Frequency Response [Hz]30-21k Mounting Hole Diameter [in, mm]5-11/16 x 8-7/16, 144 x 215

Top Mount Depth [in, mm]2 15/16, 75 Bottom Mount Depth [in,mm] 3-3/16, 81Tweeter Protrusion [in,mm] 1/8, 3GrillesYesTweeter Magnet Material Neodymium Tweeter Dome Material Silk Woofer Cone Material Polypropylene Woofer Surround Material Rubber Warranty When purchased from an Authorized KICKER Dealer or kicker.com, KICKER warrants this product to be free from defects in material and workmanship under normal use for a period of TWO (2) YEARS from date of original purchase

Potent Performance

KICKER KS-Series Speakers let you play at concert-like volume, yet maintain the smoothness and subtlety to please even the most selective ear. Internally dampened polypropylene cones and durable rubber surrounds assist the woofers in creating precise midrange and midbass, while high-quality silk-dome tweeters deliver natural, detailed highs.

With less than a 3-inch mounting depth and just three millimeters of tweeter protrusion, the KSC690 is a perfect fit in almost every vehicle on the road today. They work best with 15 to 150 watts of recommended power. See below for more details.

• High power handling

• Silk-dome tweeters for a smooth sound

• Polypropylene woofer and tough rubber surrounds

• Thin-mount design easily fits behind factory grilles

• Grilles included

Specifications

Speaker Design 2-Way Woofer [in, mm]6 x 9, 160 x 230Tweeter [in, mm]1, 25Rated Impedance [Ω]4Recommended Amplifier Power [Watts RMS]15-150Sensitivity [1W, 1m]92Frequency Response [Hz]30-21kMounting Hole Diameter [in, mm]5-11/16 x 8-7/16, 144 x 215

Top Mount Depth [in, mm]2-15/16, 75 Bottom Mount Depth [in,mm] 3-3/16, 81Tweeter Protrusion [in,mm] 1/8, 3 Grilles Yes Tweeter Magnet Material Neodymium Tweeter Dome Material Silk Woofer Cone Material Polypropylene Woofer Surround Material Rubber Warranty When purchased from an Authorized KICKER Dealer or kicker.com, KICKER warrants this product to be free from defects in material and workmanship under normal use for a period of TWO (2) YEARS from date of original purchase.

Potent Performance

KICKER KS-Series Speakers let you play at concert-like volume, yet maintain the smoothness and subtlety to please even the most selective ear. Internally dampened polypropylene cones and durable rubber surrounds assist the woofers in creating precise midrange and midbass, while high-quality silk-dome tweeters deliver natural, detailed highs.

With less than a 2.5-inch mounting depth and zero tweeter protrusion, the KSC680 is a perfect fit in almost every vehicle on the road today, including 5 x 7-inch speaker holes. They work best with 15 to 75 watts of recommended power. See below for more details.

• High power handling

• Silk-dome tweeters for a smooth sound

• Polypropylene woofer and tough rubber surrounds

• Thin-mount design easily fits behind factory grilles

Specifications

Speaker Design2-WayWoofer [in, mm]6 x 8, 160 x 200Tweeter [in, mm]¾, 20Rated Impedance [Ω]4Recommended Amplifier Power [Watts RMS]15-75Sensitivity [1W, 1m]90Frequency Response [Hz]45-21k Mounting Hole Diameter [in, mm]5 x 7-3/16, 127 x 182

Top Mount Depth [in, mm]2-1/4, 58Bottom Mount Depth [in,mm] 2-5/8, 67Tweeter Protrusion [in,mm] 0, 1GrillesNoTweeter Magnet Material Neodymium Tweeter Dome Material Silk Woofer Cone Material Polypropylene Woofer Surround Material Rubber Warranty When purchased from an Authorized KICKER Dealer or kicker.com, KICKER warrants this product to be free from defects in material and workmanship under normal use for a period of TWO (2) YEARS from date of original purchase.

Potent Performance

KICKER KS-Series Speakers let you play at concert-like volume, yet maintain the smoothness and subtlety to please even the most selective ear. Internally dampened polypropylene cones and durable rubber surrounds assist the woofers in creating precise midrange and mid bass, while high-quality silk-dome tweeters deliver natural, detailed highs.

With less than a 2-inch mounting depth and one millimeter of tweeter protrusion, the KSC460 is a perfect fit in almost every vehicle on the road today. They work best with 15 to 75 watts of recommended power. See below for more details.

• High power handling

• Silk-dome tweeters for a smooth sound

• Polypropylene woofer and tough rubber surrounds

• Thin-mount design easily fits behind factory grilles

Specifications

Speaker Design 2-WayWoofer [in, mm]4x6, 100x160 Tweeter [in, mm]½, 13 Rated Impedance [Ω] 4Recommended Amplifier Power [Watts RMS] 15-75 Sensitivity [1W, 1m]88Frequency Response [Hz]50-20k Mounting Hole Diameter [in, mm]4x5-5⁄16, 101x151

Top Mount Depth [in, mm]1-11⁄16, 44 Bottom Mount Depth [in,mm]2, 51Tweeter Protrusion [in,mm]0, 1GrillesNoTweeter Magnet Material Neodymium Tweeter Dome Material Silk Woofer Cone Material Polypropylene Woofer Surround Material Rubber

Potent Performance

KICKER KS-Series Speakers let you play at concert-like volume, yet maintain the smoothness and subtlety to please even the most selective ear. Internally dampened polypropylene cones and durable rubber surrounds assist the woofers in creating precise midrange and midbass, while high-quality silk-dome tweeters deliver natural, detailed highs.

With less than a 2-inch mounting depth and zero tweeter protrusion, the KSC40 is a perfect fit in almost every vehicle on the road today. They work best with 15 to 75 watts of recommended power. See below for more details.

• High power handling

• Silk-dome tweeters for a smooth sound

• Polypropylene woofer and tough rubber surrounds

• Thin-mount design easily fits behind factory grilles

Speaker Design 2-WayWoofer [in, mm]4, 100Tweeter [in, mm]½, 13 Rated Impedance [Ω] 4 Recommended Amplifier Power [Watts RMS] 15-75 Sensitivity [1W, 1m] 88 Frequency Response [Hz] 60-20k Mounting Hole Diameter [in, mm]3-11⁄16, 94

Potent Performance

KICKER KS-Series Speakers let you play at concert-like volume, yet maintain the smoothness and subtlety to please even the most selective ear. Internally dampened polypropylene cones and durable rubber surrounds assist the woofers in creating precise midrange and midbass, while high-quality silk-dome tweeters deliver natural, detailed highs.

With only two millimeters of tweeter protrusion, the KSC350 is a perfect fit in almost every vehicle on the road today. They work best with 15 to 50 watts of recommended power. See below for more details.

• High power handling

• Silk-dome tweeters for a smooth sound

• Polypropylene woofer and tough rubber surrounds

• Thin-mount design easily fits behind factory grilles

Specifications

Speaker Design2-WayWoofer [in, mm]3-½, 89Tweeter [in, mm]½, 13Rated Impedance [Ω]4Recommended Amplifier Power [Watts RMS]15-50Sensitivity [1W, 1m]88Frequency Response [Hz]80-20kMounting Hole Diameter [in, mm]3-1⁄16, 78

Top Mount Depth [in, mm] 1-5⁄8, 41.5Bottom Mount Depth [in,mm] 1-7⁄8, 49 Tweeter Protrusion [in,mm] 1/16, 2GrillesNoTweeter Magnet Material Neodymium Tweeter Dome Material Silk Woofer Cone Material Polypropylene Woofer Surround Material Rubber Warranty When purchased from an Authorized KICKER Dealer or kicker.com, KICKER warrants this product to be free from defects in material and workmanship under normal use for a period of TWO (2) YEARS from date of original purchase

TB

Loaded Enclosures

Great bass from a tiny space! The weatherproof TB Sub System delivers serious bump from any corner of your trunk, behind your truck’s seat, or even in your boat or side-by-side!

Skip to all Models

THE NEW TUBE

Great bass from a tiny space! The weatherproof TB Sub System delivers serious bump from any corner of your trunk, behind your truck’s seat, or even in your boat or side-by-side!

MOUNT IT UP – OR DOWN

An innovative bracket system allows the TB to be mounted with ease, horizontally or vertically. Put it anywhere. In nearly any vehicle. In a boat, works best horizontally and inside furniture. Now you have the flexibility to install your sub, your way.

ALL COMPR

The CompR sub mounted in the TB features a powerful ceramic magnet, an advanced suspension and superior heat management system for big bass and long life on the road. Our signature double red stitching creates an outstanding bond between the Santoprene® surround and Polypropylene woofer cone for reliable performance under extreme conditions. KICKER’s SoloKon™ technology joins the cone to the vented back brace - both cooling the motor and eliminating distortion for clean, smooth bass. You get all this CompR innovation and technology is in every TB.

RE FLEX

Made with the same surround and cone materials as the active sub, the Reflex Subwoofer is mounted on the opposite side of the TB - creating even deeper, louder bass.

WEATHER-PROOF

The all-weather TB loves to play outdoors. Hook it up on your boat, UTV or Jeep for fun on the trail, in the water or at the dunes. It keeps pounding as hard as you want - wherever you want.

*Extreme durability in fresh-water applications only (not recommended for salt water)

Single TL7T 2-Ohm Enclosure

KICKER Sub Enclosures are the perfect solution when space is at a premium. Covered in stylish black carpeting and built with thick MDF construction, these sturdy enclosures take some serious power, yet easily fit under your seat.

Features:

• Genuine KICKER L7T Subwoofer Included

• Angled Design for Excellent Fit

• Heavy Internal Bracing

• Single 2-Ohm Terminal

• Easy to Install and Wire

• Thick Black Carpeting

• Rounded Corners

• Embroidered KICKER Logo

• Thick MDF Construction

• 8” 350 WATTS RMS

• 10” 500 WATTS RMS

• 12” 600 WATTS RMS

Features:

sealed enclosure with two 10" L7T square shallow-mount subwoofers

fits under the rear seat of select 2002-up RAM Crew Cab and Quad Cab trucks

3/4" MDF construction with black carpet covering

total power handling: 1000 watts RMS

single wiring terminal with 2 ohms impedance

frequency response: 25-100 Hz

sensitivity: 84.1 dB

dimensions: 58.4"W x 7.56"H x 16.42"D

Dual L7T Truck-Specific Enclosures provide impactful bass and install under the back seat to retain cab space and legroom.

Fits*:
RAM 1500 Quad Cab (2002-2018)
RAM 1500 Crew Cab (2009-2018)
RAM 2500/3500 Quad Cab (2003-2026)
RAM 2500/3500 Crew Cab (2009-2026)
RAM 1500 Classic Quad/Crew Cab (2019-2024)

*Items such as inverters, storage compartments, spare tire tools or floor mats may require removal.

For Your Chevy or GMC

• Requires amp and handles 1,200 watts RMS

• Single 2-Ohm terminal

• Dual KICKER Solo-Baric L7T Square Subwoofers

• Thick black carpeting

• MDF construction and heavy internal bracing

Made from thick MDF and formed specifically to fit every contour of your Silverado or Sierra, this custom enclosure features a pair of down-firing L7T 12-inch subwoofers with a monstrous 1,200-watts of recommended power. See details below.

The L7T Advantage

It’s simple – more cone area means more air moves – for more bass and up to 20% more cone area than a conventional round sub. KICKER acoustic engineers put the largest voice coil and magnet we’ve ever integrated into a thin sub, then added a next-level top-plate design, unique heat management system and our signature cone stitching all help to give you deep bass and outstanding reliability in a single, mind-blowing design that gives you max output!

Specifications

TYPE:Vehicle-SpecificDesign:Dual Down-FireWOOFER SIZE (in, cm):12, 30IMPEDANCE (Ohms):2Recommended Amplifier Power (watts RMS):1200

FREQUENCY RESPONSE (Hz):25-100BOX DIMENSIONS:Width: 52” [132.1cm]Height: 7-7/16” [18.9cm]Depth: 15-1/2” [39.4cm]WarrantyWhen purchased from an Authorized KICKER Dealer or kicker.com, KICKER warrants this product to be free from defects in material and workmanship under normal use for a period of ONE (1) YEARS from date of original purchase.

For your Ford F150/F250/F350

Fits*:
Ford F-150 Crew Cab (2009-newer)
Ford SuperDuty Crew Cab (2017-newer)

• Requires amp and handles 1,000 watts RMS

• Single 2-Ohm terminal

• Dual KICKER Solo-Baric L7T Square Subwoofers

• Thick black carpeting

• MDF construction and heavy internal bracing

• FREQUENCY RESPONSE (Hz):25-100
  
  Made from thick MDF and formed specifically to fit every contour of your F-150 and SuperDuty, this custom enclosure features a pair of down-firing L7T 10-inch subwoofers with a monstrous 1,000-watts of recommended power. 

*Items such as inverters, storage compartments, spare tire tools or floor mats may require removal.

Drone X2 LTE With BG95 cell control + L76LL GPS

Add DroneMobile smartphone control and GPS tracking to a compatible remote start and security system. Powered by AT&T LTE. Works in most regions of North America with LTE coverage* (including U.S.A., Canada, and Mexico). Free 30-Day Premium Trial included.

X2 is the next generation of DroneMobile and replaces the X1 LTE

Rear Camera for XC-LTE

Add a rear cam to your Drone XC Dash Camera for double the coverage on and off the road (up to 146º of extra surveillance). The Drone RC1 Rear Cam has your back so that you can focus on what’s ahead of you. Includes a 23 foot cable to reach the rear of the cab.

Specifications

Resolution

Full HD (1080p)

Special Features

Up to 146º viewing angle

Operating Temperature

-20ºC to 75ºC

Related Product SKUs

XC-LTE Kit

MYCAR2 & F790AIR 2-CHANNEL DASHCAM BUNDLE (INCLUDES TGM)

Overview

MC200 Now with video Notifications!
Crash Notifications with video (included FREE with Premium plan)
Get Instant View feature for on-demand video requests and Parking Event Notifications when you upgrade to Premium Plus plan
Can be used wihout remote start functionality
Most extensive coverage area vs other telematics devices
Includes “Premium” Lifetime Service Plan with available in-app upgrade to “Premium
Plus” Lifetime Service Plan
Compatible with most digital remote start brands
Fully customizable app, including vehicle picker
Instant Locate (GPS)

F790AIR features
•Dual Channel Recording - Front-facing dashboard camera with rear camera input
•High Definition Video Recording - Clear and crisp video files be it daytime or nighttime
•Add up to 5 cameras with the MB100 (Multiplexer accessory)
•Video Enhancement Technology - High Dynamic Range (HDR) | Dewarping Image Correction
•144° Wide Angle Field of View - Superb coverage that minimises blind spots at all times
•Wi-Fi with Mobile Viewer - Download recordings to your mobile device and adjust settings while connected to the dash cam via Wi-Fi
•Advanced Driver Alert System (ADAS)
•Energy Saving in Parking Mode*
•Parking Surveillance Mode*
•Time Lapse Park Mode* - Lengthens parking surveillance recording time
•Super Night Vision 3.0
•Built-In GPS Data Log - Accurate location, vehicle speed and driving history
•High Temperature Protection (Integrated Thermal Protection)

*Requires Hardwiring Cable and installation

Overview

FHD 1080P front & rear recording
· HDR and Super Night Vision 3 technology
· Parking Lot Surveilance mode
· Built-in GPS for Traffic Camera alerts
· Plug-In mount for clutter-free installation
· Hardwire kit and 32GB memory card included
· Compatible with Thinkware app and MyCar2 app

Camera system only

*TGM required for dashcam integration with MyCar2. MyCar2 and TGM sold separately.

Overview

CAT 4 LTE MODEM FOR U3000PRO
Supply input voltage: 4.5 V – 5.5 V (Max. Current: 2 A)
Size: L 89 x W 58 x H 14.5 mm / 43 g
Power Consumption: Idle Mode: 0.15 W, Traffic Mode: 4.15 W @ Max. Power (23 dBm)
Nano SIM Card compatible
High-speed USB 2.0 connection
Includes: 0.5m cable, 3m cable, double sided tape, quick start guide

Overview

Front 4K UHD @ 30 FPS or 2K @ 60FPS | 8MP Sony STARVIS 2 IMX678
Rear 2K QHD @ 30 FPS | 5MP Sony STARVIS 2 IMX675
Dual HDR (Driving mode)
Dual Front/Rear 60Ghz Radar Parking Mode (BUILT IN)
LTE compatible (optional Thinkware Cat. 4 modem)
BUILT IN GPS
G-SENSOR BUILT IN
Wide-Angle View 146° (Front)| 160° (Rear)
Safety Camera Alert & Traffic Light Charnge Alarm (TLCA)
Super Night Vision 4.0
Smart Parking Mode
Parking Surveillance Mode
Easy Wi-Fi Device Pairing
Thinkware CONNECTED App
Includes CPL filter, OBD2 power cable, Heat Blocking Film, 64GB micro SD card (compatible up to 512GB)