Now with RGB LED lighting standard, the weather-proof KM60 Coaxial Marine Speaker is purpose-made for great looks and superior sonic quality.
Features:
RGB LED Lighting Included
Spectacular Highs And Smooth, Impactful Midrange
Made Specifically For Marine With Sealed Motor And Polymer Basket
UV-Treated Polypropylene Woofer With Santoprene® Surround
Stainless Steel Hardware Included
White Grill And Basket Will Not Yellow Or Fade
ASTM Tested For UV And Salt/Fog Exposure
This KM 6.5-Inch Speaker works best with 50 watts of recommended power. See below for more details.
We don’t just say its "marine ready", we prove it! ASTM-tested for UV and salt/fog exposure, all KICKER Marine Speakers are designed specifically for boat audio and meets or exceeds the strictest standards in the industry.
UV treatments on the coaxials' injection-molded cones, Santoprene® surrounds, baskets and grilles help all models maintain in marine environments. These speakers can endure almost any weather conditions with splash-and-spray-resisting sealed motors, cones and locking terminal covers. Speaker hardware is forged from rustproof, 316L stainless-steel.
Spectacular highs and midrange sounds coupled with the simplest of speaker installations, provide full-range audio specifically for a marine environment.
Woofer (in,mm) 6-1/2, 165 Tweeter (in,mm) 1/2, 13 Tweeter Dome Material PEI Rated Impedance (Ω) 4 Peak Power (watts, per ANSI/CTA-2031-A) 150 Recommended Amplifier Power (watts RMS) 15-50
Sensitivity (1W,1m) 90 Frequency Response (Hz)35-21k Mounting Hole Diameter (in,mm) 5-3/16, 132
Mounting Template*
*For template to be accurate, ensure the print properties are set at 100% not scale to page.
Mounting Depth (in,mm) 2-1/2, 62 Grilles White Only Warranty When purchased from an Authorized KICKER Dealer or kicker.com, KICKER warrants this product to be free from defects in material and workmanship under normal use for a period of THREE (3) YEARS from date of original purchase.
Using all the protection that KICKER REAL MARINE® can provide, KM614FL Coaxial Speakers come with a streamlined grille design for a non-intrusive installation and more subtle look.
Features:
Sleek-Profile Grille Design
Comes with Two Sets of Grilles – an OE-style white pair and a silver pair with open-hole tweeters
Spectacular Highs and Smooth, Impactful Midrange
ASTM-Tested for UV and Salt/Fog Exposure
KICKER REAL MARINE® with Splash-and-Spray, Sealed Components and Rust-proof Hardware
Multi-Color RGB Lighting
Select Colors and Modes with the KICKER KMLC LED Remote Control (sold separately)
This KM 6.5-inch Speaker works best with 15-65 watts of recommended power. See below for more details.
Woofer( in,mm) 6-1/2, 165 Tweeter (in,mm) 1/2, 13 Tweeter Dome Material PEI Rated Impedance( Ω) 4 Peak Power (watts, per ANSI/CTA-2031-A) 130 Recommended Amplifier Power (watts RMS) 15-65
Sensitivity (1W,1m) 90 Frequency Response (Hz)35-21k Mounting Hole Diameter (in,mm)5-1/4, 132
Mounting Template*
*For template to be accurate, ensure the print properties are set at 100% not scale to page.
Mounting Depth (in,mm) 2-13/16, 64 Grilles 2 pair (OE-style white/silver with open tweeter) Warranty When purchased from an Authorized KICKER Dealer or kicker.com, KICKER warrants this product to be free from defects in material and workmanship under normal use for a period of THREE (3) YEARS from date of original purchase.
Loud and clear, the KM Coaxial Marine Speakers are built to pump out the tunes – and the fun - for years to come! Whether you mount your speakers in the hull or in KICKER® tower enclosures, you also get a pair of stout marine-grade grilles!
Our speakers are made to thrive in the water. UV treatments on injection-molded cones, Santoprene® surrounds, baskets and grilles all help maintain top-shelf performance. KM speakers will endure almost any weather conditions with splash-and-spray-resistant sealed motors, cones and Locking/Sealed Terminal Covers. Speaker hardware is forged from rustproof, 316L stainless-steel.
IP66 certification (protected from dust and water jets/splash)
Four-Ohm Voice Coil
One-Inch PEI Tweeter to Resist Corrosion
UV-Treated Polypropylene Woofer With Santoprene® Surround
UV-Resistant Polymer Basket
Locking/Sealed Terminal Cover
Sealed Motor Structure
316L Stainless Mounting Hardware Included
White and Charcoal Grilles With Seven-Color LED System Included*
Meets or Exceeds ASTM Standards for UV** and Salt/Fog Exposure***
*Upgradable to 20 Colors and 19 Lighting Modes with KMLC
**ASTM G154 400 hr. Accelerated UV Test
***ASTM B117 200 hr. Salt Fog Test
This KM Eight-Inch Coaxial Speaker works best with 150 watts of recommended power.
Woofer (in,mm)8,200 Tweeter (in,mm)1, 25 Tweeter Dome Material PEI Rated Impedance(Ω)4 Peak Power (watts, per ANSI/CTA-2031-A)300 Recommended Amplifier Power (watts RMS)150 Sensitivity(1W,1m)92 Frequency Response(Hz)30-21k
Mounting Hole Diameter (in,mm)6-9/16, 170
Mounting Template*
*For template to be accurate, ensure the print properties are set at 100% not scale to page.
Mounting Depth (in,mm)3-5/16, 82.9
LED Lighting:Yes
Grilles:Charcoal and White
What's in the Box:
2 - 8" 4Ω Coaxials
8 - Mounting Screws
8 - Mounting Screw Clips
2 - Wire Connection Cover
2 - Zip Ties
Warranty When purchased from an Authorized KICKER Dealer or kicker.com, KICKER warrants this product to be free from defects in material and workmanship under normal use for a period of THREE (3) YEARS from date of original purchase.
Loud and clear, the KM Coaxial Marine Speakers are built to pump out the tunes – and the fun - for years to come! Whether you mount your speakers in the hull or in KICKER® tower enclosures, you also get a pair of stout marine-grade grilles!
Our speakers are made to thrive in the water. UV treatments on injection-molded cones, Santoprene® surrounds, baskets and grilles all help maintain top-shelf performance. KM speakers will endure almost any weather conditions with splash-and-spray-resistant sealed motors, cones and Locking/Sealed Terminal Covers. Speaker hardware is forged from rustproof, 316L stainless-steel.
IP66 certification (protected from dust and water jets/splash)
Four-Ohm Voice Coil
3/4-Inch PEI Tweeter to Resist Corrosion
UV-Treated Polypropylene Woofer With Santoprene® Surround
UV-Resistant Polymer Basket
Locking/Sealed Terminal Cover
Sealed Motor Structure
316L Stainless Mounting Hardware Included
White and Charcoal Grilles With Seven-Color LED System Included*
Meets or Exceeds ASTM Standards for UV** and Salt/Fog Exposure***
*Upgradable to 20 Colors and 19 Lighting Modes with KMLC
**ASTM G154 400 hr. Accelerated UV Test
***ASTM B117 200 hr. Salt Fog Test
This KM 6.5-Inch Coaxial Speaker works best with 65 watts of recommended power.
Woofer (in,mm)6-1/2, 165 Tweeter (in,mm)3/4, 20 Tweeter Dome Material PEI Rated Impedance(Ω)4 Peak Power (watts, per ANSI/CTA-2031-A)195 Recommended Amplifier Power (watts RMS)65 Sensitivity(1W,1m)90 Frequency Response(Hz)35-21k
Mounting Hole Diameter(in,mm)5-1/16, 128
Mounting Template*
*For template to be accurate, ensure the print properties are set at 100% not scale to page.
Mounting Depth (in,mm)2-3/8, 59.9
LED Lighting:Yes
Grilles:Charcoal and White
What's in the Box:
2 - 6.5" 4Ω Coaxials
8 - Mounting Screws
8 - Mounting Screw Clips
2 - Wire Connection Cover
2 - Zip Ties
Warranty When purchased from an Authorized KICKER Dealer or kicker.com, KICKER warrants this product to be free from defects in material and workmanship under normal use for a period of THREE (3) YEARS from date of original purchase.
They’re loud. They’re clear. They’re nearly indestructible! The KM Coaxial Marine Speakers are built to pump out the tunes – and the fun - for years to come! Whether you mount your speakers in the hull or in KICKER® tower enclosures, you also get a pair of stout marine-grade grilles!
MARINE MARVELS
Our speakers are made to thrive in the water. UV treatments on injection-molded cones, Santoprene® surrounds, baskets and grilles all help maintain top-shelf performance. KM speakers will endure almost any weather conditions with splash-and-spray-resistant sealed motors, cones and Locking/Sealed Terminal Covers. Speaker hardware is forged from rustproof, 316L stainless-steel.
IP66 certification (protected from dust and water jets/splash)
Four-Ohm Voice Coil
3/4-Inch PEI Tweeter to Resist Corrosion
UV-Treated Polypropylene Woofer With Santoprene® Surround
UV-Resistant Polymer Basket
Locking/Sealed Terminal Cover
Sealed Motor Structure
316L Stainless Mounting Hardware Included
Charcoal and White Grilles Included
Meets or Exceeds ASTM Standards for UV* and Salt/Fog Exposure**
*ASTM G154 400 hr. Accelerated UV Test
**ASTM B117 200 hr. Salt Fog Test
This KM 6.5-Inch Coaxial Speaker works best with 65 watts of recommended power.
Specifications
Woofer (in,mm) 6-1/2, 165 Tweeter (in,mm) 3/4, 20 Tweeter Dome Material PEI Rated Impedance (Ω)4 Peak Power (watts, per ANSI/CTA-2031-A)195 Recommended Amplifier Power (watts RMS) 65Sensitivity (1W,1m)90 Frequency Response (Hz)35-21k
Mounting Hole Diameter (in,mm)5-1/16, 128 Mounting Depth (in,mm)2-3/8, 59.9
Mounting Template*
*For template to be accurate, ensure the print properties are set at 100% not scale to page.
LED Lighting: No
Grilles: Charcoal and White
What's in the Box:
2 - 6.5" 4Ω Coaxials
8 - Mounting Screws
8 - Mounting Screw Clips
2 - Wire Connection Cover
2 - Zip Ties
Warranty When purchased from an Authorized KICKER Dealer or kicker.com, KICKER warrants this product to be free from defects in material and workmanship under normal use for a period of THREE (3) YEARS from date of original purchase.
Physical dimensions (H x W x D)2.68" x 6.18" x 4.99" (68 x 157 x 126.6 mm)Weight12.4 oz (350 g)Water ratingIPX6 and IPX7 (Front panel only, when properly installed)Power input10.8-16 VDCOperating temperature range32° to 122° F (0° to 50° C)Current (max.)15 ANMEA 2000® LEN1 (50 mA)BLUETOOTH® wireless rangeUp to 30 ft (10 m)ANT wireless rangeUp to 10 ft (3 m)Wireless frequencies/protocolsBLUETOOTH 2.4 GHz @ +12 dBm nominal
ANT 2.4 GHz @ +7 dBm nominalCompass-safe distance5.9" (150 mm)
Display2.7" optically bonded color LCDBuilt-in amplifierClass-D (minimum 4 Ohm impedance)Peak power200 WRated power output (4 Ohm)26 W rms x 4 @ 14.4 V input < 10% THDBuilt-in Digital Signal Processingyes (with preconfigured DSP profiles)Fusion-Link™ controlyes (with MFD, smartphone and Garmin watch)Multi-Zone™ technology2 zonesBLUETOOTH wireless technologyyesANT wireless technologyyesSiriusXM-readyyes (requires SiriusXM Connect vehicle tuner)DAB+ readyyes (requires DAB100A antenna module)NRX remote compatibilityyesMulti-language interfaceBulgarian, Chinese (Simplified/Traditional), Croatian, Czech
Danish, Dutch, English, Finnish, French, German, Greek
Italian, Japanese, Korean, Norwegian, Polish,
Portuguese (BR/PT), Slovenian, Spanish, Swedish,
Thai, TurkishSoftware updatesUSBWarranty1 year
SourcesAM / FM / Bluetooth / USB audio / iPhone / iPod / AUX x1 /
MTP / SiriusXM-Ready (USA only, requires optional SiriusXM
Connect vehicle tuner) / DAB+ ready (available in
Europe and Australia only)
Auxiliary inputOne RCA input (AUX)NMEA 2000One NMEA 2000 portUSB 2.0One USB 2.0 portSiriusXM satellite radioOne SiriusXM port (requires SiriusXM Connect vehicle tuner, does not support traffic and weather)AM/FM radioOne Motorola antenna connector portSpeaker4 speaker connections (2 zone amplified)RCA pre-out (left, right and subwoofer)2 zones (requires external amplification)Line outZone 1, Zone 2 (L + R, requires external amplification)Subwoofer outZone 1, Zone 2 (requires external amplification)
The PMX-3 compact digital media receiver, designed for marine and motorsports applications, features a 2.7"full color TFT display for optimum viewing even in full sun that is optically wet bonded to prevent any dust or moisture penetration.
The PMX-3 is IPX6 rated and uses a water resistant rotary encoder knob with white LED button illumination and front mounted sub level controls. Additionally, with features such SiriusXM tuner compatibility, Pandora control capabilities and Bluetooth audio steaming with album art support1, this unit becomes a true command center of any system. Output flexibility comes with a 4x50 @ 2ohm internal amplifier or front and rear/sub output RCA's allowing the addition of aftermarket amplifiers for more power and output. 1Android devices equipped with limited functionality. Please refer to owners manual for details.
We've also upgraded the unit to feature a reverse camera composite video input with reverse trigger control and a day/ night display mode for better viewing in low light conditions. Finally, add in the EEprom memory system, custom GUI interface and wired remote expansion capabilities and you have the only media receiver you'll ever need.
2.7" Full color Thin Film Transistor display
SiriusXM-Ready™ (SXV300 module) with color channel logos (18 channel presets)
Wired remote ready (up to 3 remotes)
Electrically Erasable Programmable Read-Only Memory (EEPROM) is a type of non-volatile memory used in electronic devices to store data that must be saved when power is removed
Integrated voltage gauge w/ low voltage alert
Two-piece mounting system to secure panel to mounting surface
Upgradeable Firmware and Bluetooth Software via USB
Front Panel Sub Control
IPX6 Marine Grade for prevention of water intrusion
ASTM: B117 Salt Fog & D4329 UV Exposure Tested
Internal power amplifier 4x45W 2Ω stable
Single Zone output with 2 channels front full range and 2 channels rear/ subwoofer selectable rated at 2 volt
Automotive grade AM/FM Radio, Weatherband Radio digital tuner. Supports Radio Data System (RDS) to receive broadcast information
Licensed Pandora control (Apple direct USB or BT/Android via Bluetooth)
Made for iPhone apple certified
Bluetooth streaming audio (A2DP) protocol version 1.4 installed
Rear USB With 1A Charging Only
Rear AUX-In (L/R)
Simple Secure Pairing (SSP)
Display album art from connected iPhones on the radio display
Folder browsing via BT connected iPhones
Dedicated DSP audio processors for each zone with independent 7 Band EQ + Punch EQ
Selectable high pass and low pass crossover points for each zone
Selectable crossover slopes of 12dB or 24 dB for each zone
Adjustable input gain for each source
Waterproof Rotary Encoder Volume Control
Tactile convex buttons for easy identification
White LED Button Illumination
Wired and front panel illumination control
Wet Bonded Display
Epoxy coated circuit board for water resistance
Direct composite video input connection
External trigger input to activate reverse camera mode
Day/Night display mode
2-Year Warranty
The PMX-5CAN digital media receiver is designed for marine and motorsports systems.
The PMX-5CAN features a 2.7"full color TFT display for optimum viewing - even in full sun - that is optically wet bonded to prevent any dust or moisture penetration. It is IPX6 rated and uses a water resistant rotary encoder knob with white LED button illumination and front mounted sub level controls. Additionally, with features such as SiriusXM and Pandora capabilities, Bluetooth audio steaming with album art support for Apple and Android products and true 2 zone/2 source control, this unit becomes a true command center of any system.
Output flexibility comes a 4x50W @ 2ohm internal amplifier or dual zone output RCA's allowing the addition of after-market amplifiers for more power and output. Add in the EEPROM memory system, custom GUI interface and wired remote expansion capabilities and you have the only media receiver you'll ever need. The PMX-5CAN also features CANbus functionality for connection to Raymarine MFD (Multi-Function Display) systems using the PMX-CAN adaptor (see Accessories tab.)
ISO8846/SAE J1171 Ignition Protection Certified
Stainless Steel Rear Chassis
Pandora Internet Radio
SiriusXM-Ready™
Steering Wheel Control Interface Compatible
A2DP and AVRCP Bluetooth Wireless Streaming
Low Voltage Warning Alert
Multi Region Radio Frequencies
FCC, CE, IC, and C-Tick Certified
AUX and USB Inputs with USB Charging
Independent Subwoofer Level Control
On Board Punch EQ Control
Selectable HP / LP / AP Crossovers with Selectable Slope 12 / 24 dB/Oct
IPX6 Marine Grade for prevention of water intrusion
7-Band Graphic EQ
2.7" full color display w/ auto dimming backlightning
Zone Control: 2 Zone / 2 Source (F/R/S + F)
AM/FM/WB Tuner
CANbus (Controller Area Network) compatible. Requires PMX-CAN accessory
Compatible with a Multi-Function Display using NMEA2K entertainment standard. See our MFD Compatibility Chart
*Antenna not included
2-Year Warranty
Optically bonded monochrome LCD improves screen visibility.
Seamlessly retrofit your existing DIN-sized cutout without needing to reconfigure dash space.
Built-in Class-AB amplifier delivers efficiency with reduced distortion.
Control your music from a compatible multifunction display (MFD)1, smart device or Garmin watch.
6.5-inch Coaxial Marine Speakers 50W RMS power handling 1-inch (25 mm) silk dome tweeter Includes White & Gray Metallic Sport Grilles
Includes White & Metallic Gray Sport Grilles
Salt & Sun Certified
50W RMS power handling, perfect for use with Clarion Marine amplifiers
Bridge-mounted, 1-inch (25 mm), edge-driven, silk dome tweeter with neodymium magnet and ferrofluid cooling
Standard cutout size and mounting hole for easy retrofitting
Continuous Power Handling (RMS)50 WRecommended Amplifier Power (RMS)30 - 100 W / Ch.System Efficiency87 dB @ 1 W / 1 mSystem Nominal Impedance4 ΩSystem Frequency Response55 Hz - 20 KHz ± 3 dB
Frame Outer Diameter6.90 in / 175 mmBolt Hole Circle Diameter6.14 in / 156 mmFrontal Grille Protrusion*1.36 in / 35 mmMounting Hole Diameter5.00 - 5.25 in / 127 - 133 mmMounting Depth2.83 in / 72 mm*Frontal grille protrusion measured from mounting surface
The M1D2-10 Color Optix™ 10” DVC 2-Ohm subwoofers deliver loud, clear, accurate bass, and light the way for your journey! The subwoofers connect with the Rockford Fosgate Color Optix™ Controller and RF Connect App, allowing you to customize your own color patterns. The Element Ready™ design and IPX6 certification makes them truly purpose-built for marine or motorsport applications where protection from damaging UV rays and water spray is essential.
ize
10"
Nominal Impedance (Ohms)
1-Ohm or 4-Ohm Switchable
Power Handling (Watts RMS)
300 Watts RMS
1200 Watts PEAK
Voice Coil Diameter
2.0" (50 mm)
Voice Coil Type
Dual Voice Coil
Magnet Weight (oz)
47.70 oz. (1.35 Kg)
Frequency Response
20 Hz - 750 Hz
Fs (Hz)
34
Re (Ohms)
3.7
Le (mH)
2.22
Sd (cm2)
394.1
Qms
7.80
Qes
0.47
Qts
0.44
Vas
44.2
SPL (dB @ 1w/1m)
91.5
Woofer Displacement
0.10 cu. ft. (2.80 Liters)
Xmax (mm)
7.0
Speaker Connector
Deutsch™
Cutout Diameter
8.90 in. (226 mm)
Mounting Depth
4.23 in. (107.4 mm)
Shipping Weight
8.6 Lbs. (3.9 Kg)
The M2D4-10I Color Optix™ 10” DVC 2-Ohm infinite baffle subwoofers deliver loud, clear, accurate bass, and light the way for your journey! M2 provides a customized look by using either the stainless-steel grille or the white “sport” grille insert. The subwoofers connect with the Rockford Fosgate Color Optix™ Controller and RF Connect App, allowing you to customize your own color patterns. The Element Ready™ design and IPX6 certification makes them truly purpose-built for marine or motorsport applications where protection from damaging UV rays and water spray is essential. This subwoofer is optimized for Infinite Baffle installations, where an enclosure is not required.
Size
10"
Nominal Impedance (Ohms)
2-Ohm or 8-Ohm Switchable
Power Handling (Watts RMS)
400 Watts RMS
1600 Watts PEAK
Voice Coil Diameter
2.0" (50.8 mm)
Voice Coil Type
Dual Voice Coil
Magnet Weight (oz)
55.02 oz. (1.56 Kg)
Frequency Response
20 Hz - 750 Hz
Fs (Hz)
43
Re (Ohms)
6.6
Le (mH)
1.76
Sd (cm2)
363
Qms
5.67
Qes
1.07
Qts
0.90
Vas
31.5
SPL (dB @ 1w/1m)
90.3
Xmax (mm)
12.0
Woofer Displacement
0.06 cu. ft. (1.74 Liters)
Speaker Connector
Deutsch™
Cutout Diameter
8.87 in. (225.3 mm)
Mounting Depth
4.44 in. (112.7 mm)
Shipping Weight
13.8 Lbs. (6.26 Kg)
Designed to withstand the elements, the R2-750X5 amplifier is an Element Ready™ 750 watt, full-range class-D model, capable of operating at 4Ω or 2Ω stereo, and 4Ω bridged/mono with a subwoofer channel that can be run at 4Ω or 2Ω. This amplifier is extremely efficient because of its class D technology which reduces demand on the electrical system. The amp also features C.L.E.A.N. circuitry to help you adjust your gain settings, a P.O.W.E.R. Supply that generates more power as voltage increases, and integrated Punch EQ that corrects for acoustic deficiencies while delivering up to 3X the bass.
Cta-2006 Compliant
Number of Channels
5
Total Power
(Sum of Rated Power)
750 Watts
Rated Power
(RMS Continuous Power)
50 Watts x 4 + 200 Watts x 1 @ 4Ω
100 Watts x 4 + 350 Watts x 1 @ 2Ω
200 Watts x 2 + N/A @ 4Ω Bridged/Mono
Dynamic Power
(PVC/PowerCube®)
70 Watts x 4 + 241 Watts x 1 @ 4Ω
114 Watts x 4 + 426 Watts x 1 @ 2Ω
234 Watts x 2 + N/A @ 4Ω Bridged/Mono
Bridgeable
Yes
Frequency Response
20 Hz - 20 kHz
Input Sensitivity
Low-Level: 150 mV - 4 V
High-Level: 450 mV - 12 V
Circuit Topology Class
Class D
Efficiency (average)
Total Harmonic Distortion (THD+Noise)
4Ω: <1.0%
2Ω: <1.0%
Signal Input
Front Low-Level: 2 RCA
Front High-Level: 4-Pin Molex
Rear Low-Level: 2 RCA
Rear High-Level: 4-Pin Molex
Sub Low-Level: 2 RCA
Sub High-Level: 4-Pin Molex
Signal Output
N/A
Tone Controls
0 to +18 dB @ 45 Hz
Crossover Controls
Front High-Pass:
50 Hz - 250 Hz @ 12dB/Octave Butterworth
Front Low-Pass:
50 Hz - 250 Hz @ 12dB/Octave Butterworth
Rear High-Pass:
50 Hz - 250 Hz @ 12dB/Octave Butterworth
Rear Low-Pass:
50 Hz - 250 Hz @ 12dB/Octave Butterworth
Sub Low-Pass:
50 Hz - 250 Hz @ 12dB/Octave Butterworth
Sub Infrasonic:
15 Hz - 40 Hz @ 12dB/Octave Butterworth
Remote Controls
Yes
Visual Indicators
Power/Protect
C.L.E.A.N. In
C.L.E.A.N. Out (front)
C.L.E.A.N. Out (rear)
C.L.E.A.N. Out (sub)
Power Wire Gauge
4 AWG
Power Input Connector
Compression Terminal Block
Speaker Wire Gauge
8 AWG
Speaker Output Connector
Compression Terminal Block
Cooling
Convection
Heatsink
Operating Voltage
9 - 16 VDC
Recommended Fuse
(not included)
120 A
Average Current Draw (13.8V Music)
Max. Current Draw (13.8V Sinewave)
71 A
Suggested Alternator
Included In The Box
Dimensions (H x W x D)
1.9" x 6.8" x 11.2"
(4.9 cm x 17.3 cm x 28.5 cm)
Shipping Weight
6.13 Lbs. (2.78 Kg)
Designed to withstand the elements, the M2-300X4 Element Ready™ amplifier is a 300 watt, full-range class-D model, capable of operating at 4Ω or 2Ω stereo, and 4Ω bridged/mono. This amplifier is extremely efficient because of its class D technology which reduces demand on the electrical system. The amp also features C.L.E.A.N. circuitry to help you adjust your gain settings, a P.O.W.E.R. Supply that generates more power as voltage increases.
Cta-2006 Compliant
Number of Channels
4
Total Power
(Sum of Rated Power)
300 Watts
Rated Power
(RMS Continuous Power)
50 Watts x 4 @ 4Ω
75 Watts x 4 @ 2Ω
150 Watts x 2 @ 4Ω Bridged/Mono
Dynamic Power
(PVC/PowerCube®)
70 Watts x 4 @ 4Ω
115 Watts x 4 @ 2Ω
230 Watts x 2 @ 4Ω Bridged/Mono
Bridgeable
Yes
Frequency Response
20 Hz - 20 kHz
Input Sensitivity
Low-Level: 150 mV - 4 V
High-Level: 450 mV - 12 V
Circuit Topology Class
Class D
Efficiency (average)
Total Harmonic Distortion (THD+Noise)
4Ω: <1.0%
2Ω: <1.0%
Signal Input
Front Low-Level: 2 RCA
Front High-Level: 4-Pin Molex
Rear Low-Level: 2 RCA
Rear High-Level: 4-Pin Molex
Input Switch: 2/4 Input
(works for RCA/High-Level inputs)
Signal Output
Low-Level: 2 RCA
(Pass-Thru active with RCA or Hi-Level input)
Tone Controls
No
Crossover Controls
Front High-Pass:
50 Hz - 250 Hz @ 12dB/Octave Butterworth
Front Low-Pass:
50 Hz - 250 Hz @ 12dB/Octave Butterworth
Rear High-Pass:
50 Hz - 250 Hz @ 12dB/Octave Butterworth
Rear Low-Pass:
50 Hz - 250 Hz @ 12dB/Octave Butterworth
All-Pass: Yes
Remote Controls
No
Visual Indicators
Power/Protect
C.L.E.A.N. In
C.L.E.A.N. Out (front)
C.L.E.A.N. Out (rear)
Power Wire Gauge
4 AWG
Power Input Connector
Compression Terminal Block
Speaker Wire Gauge
8 AWG
Speaker Output Connector
Compression Terminal Block
Cooling
Convection
Heatsink
Operating Voltage
9 - 16 VDC
Recommended Fuse
(not included)
60 A
Average Current Draw (13.8V Music)
Max. Current Draw (13.8V Sinewave)
39 A
Suggested Alternator
Included In The Box
Dimensions (H x W x D)
1.9" x 6.8" x 10.1"
(4.9 cm x 17.3 cm x 25.5 cm)
Shipping Weight
4.75 Lbs. (2.15 Kg)
Designed to withstand the elements, the M2-500X1 Element Ready™ amplifier is a 500 watt, class-D model, capable of operating at 4Ω or 2Ω mono. This amplifier is extremely efficient because of its class D technology which reduces demand on the electrical system. The amp also features C.L.E.A.N. circuitry to help you adjust your gain settings, a P.O.W.E.R. Supply that generates more power as voltage increases, and integrated Punch EQ that corrects for acoustic deficiencies while delivering up to 3X the bass. For subwoofers, a variable infrasonic filter and remote level control allows you to tune the bass for the desired level for the music.
Serious Marine Sound! Rockford Fosgate is proud to announce new M2 Element Ready amplifiers for 2020, featuring the following technologies:
• Element Ready: built to stand up to the marine environment
• C.L.E.A.N.: for easy setup and optimized output
• P.O.W.E.R. supply: generates more power as voltage increases
Cta-2006 Compliant
Number of Channels
1
Total Power
(Sum of Rated Power)
500 Watts
Rated Power
(RMS Continuous Power)
300 Watts x 1 @ 4Ω
500 Watts x 1 @ 2Ω
Dynamic Power
(PVC/PowerCube®)
350 Watts x 1 @ 4Ω
590 Watts x 1 @ 2Ω
Bridgeable
No
Frequency Response
20 Hz - 250 Hz
Input Sensitivity
Low-Level: 150 mV - 4 V
High-Level: 450 mV - 12 V
Circuit Topology Class
Class D
Efficiency (average)
Total Harmonic Distortion (THD+Noise)
4Ω: <1.0%
2Ω: <1.0%
Signal Input
Low-Level: 2 RCA
High-Level: 4-Pin Molex
Signal Output
Low-Level: 2 RCA
(Pass-Thru active with RCA or Hi-Level input)
Tone Controls
0 to +18 dB @ 45 Hz
Crossover Controls
Low-Pass:
50 Hz - 250 Hz @ 12dB/Octave Butterworth
Infrasonic:
15 Hz - 40 Hz @ 12dB/Octave Butterworth
Remote Controls
Yes
Visual Indicators
Power/Protect
C.L.E.A.N. In
C.L.E.A.N. Out
Power Wire Gauge
4 AWG
Power Input Connector
Compression Terminal Block
Speaker Wire Gauge
8 AWG
Speaker Output Connector
Compression Terminal Block
Cooling
Convection
Heatsink
Operating Voltage
9 - 16 VDC
Recommended Fuse
(not included)
80 A
Average Current Draw (13.8V Music)
Max. Current Draw (13.8V Sinewave)
52 A
Suggested Alternator
Included In The Box
Dimensions (H x W x D)
1.9" x 6.8" x 8.5"
(4.9 cm x 17.3 cm x 21.5 cm)
Shipping Weight
4.8 Lbs. (2.18 Kg)
Easy to install without the need to cut holes, run wires or add screws.
The compact, low profile design allows it to easily fit in a wide variety of areas on board.
Rubberized tactile buttons make it easy to use, even in wet conditions.
Interface with compatible Fusion stereos and control up to 4 audio zones on board.
Easily replaceable battery with an impressive battery life of up to 3 years.
No results match your search. Try removing a few filters.
