LX1300.7 4x125w 4ch Full Range Class D; 2x65w 2ch Full Range Class D; w/700w Class D Sub Ch
Model: 51LX13007. Equipment only; installation is available separately through Audio Pros Brantford.
Power your entire car audio system with the KICKER LX1200.5 premium five-channel Class D amplifier. Four full-range channels drive your speakers while the dedicated subwoofer channel delivers up to 700 watts RMS at 1 ohm.
RMS power: 125W x 4 at 4 ohms; 175W x 4 at 2 ohms. Subwoofer channel: 300W at 4 ohms, 550W at 2 ohms, or 700W at 1 ohm.
Includes LXCC wired control centre and LXRC dash remote. DSP-powered crossovers, SHOCwave2.0 bass restoration and FIT+ inputs support flexible system integration.
Amplifier dimensions: 12-5/8 in L x 8-7/16 in W x 2-3/8 in H. Model: 51LX12005.
The iDataStart CK-2020G-HCX is a universal 2-way remote starter system designed for vehicles from 1988 and newer. It combines the CA2HC vehicle control module, R2-2020G long-range RF kit, and ADS-AHR-HCX analog harness kit into an all-in-one remote start solution.
The system includes two 5-button 2-way remotes and features an integrated LoRa/BLE antenna, eliminating the need for a windshield-mounted antenna. The system supports remote operation with range dependent on the remote being used, with the platform supporting up to 1-mile range with compatible remotes.
The CK-2020G-HCX is compatible with most iDataStart T-harnesses and smartphone control systems, which are sold separately.
Vehicle-specific features and compatibility may vary, and Weblink programming is required before installation.
Key Features
• Universal 2-way remote starter system
• Designed for vehicles 1988 and newer
• Includes two 5-button 2-way remotes
• Integrated LoRa/BLE antenna
• No windshield-mounted antenna required
• Up to 1-mile range with compatible remote
• CA2HC vehicle control module
• ADS-AHR-HCX installation harness included
• Compatible with most iDataStart T-harnesses
• Compatible with supported smartphone control systems sold separately
• CAN FD technology
• Advanced encryption technology for vehicle compatibility
• Supports dual-process KLONing on select solutions
• System troubleshooting and diagnostic logs
• Future-ready platform with onboard RFID solutions
• Only compatible with R2-series remotes
• Weblink programming required before installation
• Vehicle-specific features and compatibility may vary
• Remote Battery : CR2450
The iDatastart RS-1010G HCX provides 1/4 mile of advertised remote range and includes the C2HC control module, AR2-1010G RF kit, and ADS-AHR-HCX analog harness kit.
iDatastart T-harnesses are sold separately.
Vehicle-specific features and compatibility may vary, and Weblink programming is required before installation.
Features:
• Universal 1-way remote starter system
• Over a 1/4 mile of advertised remote range (FM)
• Compatible with most iDatastart T-harnesses
• Weblink programming required before installation
• Vehicle-specific features and compatibility may vary
• 3 x CAN-FD interfaces
• 1 x SWC interface
• 1 x SAE-J1850 interface
• 4 x Vehicle data interfaces
• 4 x iDataLink interface ports
• 3 x 32bit ARM processors
• 5 x High power relays
• 2 x Low power relays
• 1 x USB-C
• 12 x Programmable outputs
• 10 x Digital inputs
• 4 x Diagnostic LEDs
• 1 x Siren output
• RFID interface
• Remote Battery : 2 x CR2016
Rockford Fosgate P3V2-69C2 6x9" 3-way coaxial speaker kit with 2-way external crossover 75 watts RMS, 150 watts peak
• 3-way configuration with component woofer and coaxial midrange/tweeter
• Updated mounting flanges for direct fitment in new vehicles
• 3/4” (19 mm) Tetolon® inverted dome tweeter for reliable performance under stress
• P1V2-25 Punch P1 2.5” 3-Way Coaxial Speaker
• Santoprene™ half-roll surround for low distortion and unmatched fatigue resistance
• 20-40% Mica reinforced Polypropylene curvilinear cone for enhanced rigidity and sonic quality
• Co-molded surround and cone body chemically bonded for high durability
• Ultra-flexible braded tinsel leads securely stitched to spider
• Fatigue and tear resistant linear Nomex® spider
• 15% glass-fiber reinforced PA66 injected molded composite basket
• Vented Kapton® voice coil former for excellent heat dissipation
• Overhung voice coil ensures consistent magnetic flux for less speaker distortion
• High strength Y35 ferrite motor structure (5mm larger over previous generation)
• Removable motor cover for fitment in tight applications
• Co-molded basket terminals for secure connectivity
• ICC+ (internal concealed crossover) 6dB for coaxial
• External 6dB/octave Low-Pass crossover
• 2-pin micro-Molex crossover connection that are secured using screws or zip ties
• Includes mounting hardware
• Includes cut-out template
• Grilles sold separately
• Sold in pairs (2 each)
Kit Includes:
• (2) 2.5" 4Ω Coaxial Speakers
• (2) 6x9" 4Ω Woofers
• (2) Bass Blockers
• (2) Crossovers (2x WFR)
• (2) OEM Adaptors
• Installation Hardware
Rockford Fosgate P3V2-69 6x9" 3-way speaker kit with 3-way external crossover 75 watts RMS, 150 watts peak
• 3-way component system with discrete woofer, midrange, and tweeter
• Updated mounting flanges for direct fitment in new vehicles
• 3/4” (19 mm) Tetolon® inverted dome tweeter for reliable performance under stress
• P3V2-25 Punch P3 2.5” 3-Way Component Midrange
• Santoprene™ half-roll surround for low distortion and unmatched fatigue resistance
• 20-40% Mica reinforced Polypropylene curvilinear cone for enhanced rigidity and sonic quality
• Co-molded surround and cone body chemically bonded for high durability
• Surface/flush tweeter cups use copper spring contacts for front-side servicing (tool included)
• Flush-mount threaded tweeter cup fits 3/8" thick panels using 1.5" hole-saw cutout
• Ultra-flexible braded tinsel leads securely stitched to spider
• Fatigue and tear resistant linear Nomex® spider
• 15% glass-fiber reinforced PA66 injected molded composite basket
• Vented Kapton® voice coil former for excellent heat dissipation
• Overhung voice coil ensures consistent magnetic flux for less speaker distortion
• High strength Y35 ferrite motor structure (5mm larger over previous generation)
• Co-molded basket terminals for secure connectivity
• Removable motor cover for fitment in tight applications
• External 12dB/octave High-Pass crossover with -3dB tweeter attenuation
• External 6dB/octave Band-Pass crossover
• External 6dB/octave Low-Pass crossover
• 2-pin micro-Molex crossover connection that are secured using screws or zip ties
• Includes mounting hardware
• Includes cut-out template
• Grilles sold separately
• Sold in pairs (2 each)
Kit Includes:
• (2) 3/4" 4Ω Tweeters
• (2) 2.5" 4Ω Midrange
• (2) 6"x9" 4Ω Woofers
• (6) Crossovers (2x TWT/MID/WFR)
• (2) OEM Adaptors
• Installation Hardware
Rockford Fosgate P2V2-69HO 6x9" 2-way convertible with internal/external crossover 75 watts RMS, 150 watts peak, 2ohm
• I.L.M. (Interchangeable Locking Mechanism) allows configuration as a coaxial or component system
• 2Ω High Output (HO) version for direct OEM replacement
• 3/4” (19 mm) Tetolon® inverted dome tweeter for reliable performance under stress
• 15% glass-fiber reinforced PA66 injected molded composite basket
• Santoprene™ half-roll surround for low distortion and unmatched fatigue resistance
• 20-40% Mica reinforced Polypropylene curvilinear cone for enhanced rigidity and sonic quality
• Co-molded surround and cone body chemically bonded for high durability
• Fatigue and tear resistant linear Nomex® spider
• Updated mounting flanges for direct fitment in new vehicles
• Ultra-flexible braded tinsel leads securely stitched to spider
• Surface/flush tweeter cups use copper spring contacts for front-side servicing (tool included)
• Flush-mount threaded tweeter cup fits 3/8" thick panels using 1.5" hole-saw cutout
• Includes woofer phase plug when tweeter relocated to separate tweeter cup
• Co-molded basket terminals for secure connectivity
• Overhung voice coil ensures consistent magnetic flux for less speaker distortion
• Vented Kapton® voice coil former for excellent heat dissipation
• High strength Y35 ferrite motor structure (5mm larger over previous generation)
• 2-pin micro-Molex crossover connection that are secured using screws or zip ties
• Removable motor cover for fitment in tight applications
• ICC+ (internal concealed crossover) 6dB with 12dB external option and -3dB tweeter attenuation
• Includes mounting hardware
• Includes cut-out template
• Grilles sold separately
• Sold in pairs (2 each)
Rockford Fosgate P2V2-69 6x9" 2-way convertible with internal/external crossover 75 watts RMS, 150 watts peak
• I.L.M. (Interchangeable Locking Mechanism) allows configuration as a coaxial or component system
• Upgradable to a 3-Way Component by adding the P3V2-25 midrange speaker
• Updated mounting flanges for direct fitment in new vehicles
• 3/4” (19 mm) Tetolon® inverted dome tweeter for reliable performance under stress
• Santoprene™ half-roll surround for low distortion and unmatched fatigue resistance
• 20-40% Mica reinforced Polypropylene curvilinear cone for enhanced rigidity and sonic quality
• Co-molded surround and cone body chemically bonded for high durability
• Surface/flush tweeter cups use copper spring contacts for front-side servicing (tool included)
• Co-molded basket terminals for secure connectivity
• Flush-mount threaded tweeter cup fits 3/8" thick panels using 1.5" hole-saw cutout
• Includes woofer phase plug when tweeter relocated to separate tweeter cup
• Ultra-flexible braded tinsel leads securely stitched to spider
• Fatigue and tear resistant linear Nomex® spider
• 15% glass-fiber reinforced PA66 injected molded composite basket
• Vented Kapton® voice coil former for excellent heat dissipation
• Overhung voice coil ensures consistent magnetic flux for less speaker distortion
• High strength Y35 ferrite motor structure (5mm larger over previous generation)
• Removable motor cover for fitment in tight applications
• ICC+ (internal concealed crossover) 6dB with 12dB external option and -3dB tweeter attenuation
• 2-pin micro-Molex crossover connection that are secured using screws or zip ties
• Includes mounting hardware
• Includes cut-out template
• Grilles sold separately
• Sold in pairs (2 each)
Rockford Fosgate P2V2-68HO
6x8" 2-way convertible with internal/external crossover 75 watts RMS, 150 watts peak, 2ohm
• I.L.M. (Interchangeable Locking Mechanism) allows configuration as a coaxial or component system
• 2Ω High Output (HO) version for direct OEM replacement
• Updated mounting flanges for direct fitment in new vehicles
• 3/4” (19 mm) Tetolon® inverted dome tweeter for reliable performance under stress
• Santoprene™ half-roll surround for low distortion and unmatched fatigue resistance
• 20-40% Mica reinforced Polypropylene curvilinear cone for enhanced rigidity and sonic quality
• Co-molded basket terminals for secure connectivity
• 15% glass-fiber reinforced PA66 injected molded composite basket
• Co-molded surround and cone body chemically bonded for high durability
• Fatigue and tear resistant linear Nomex® spider
• Ultra-flexible braded tinsel leads securely stitched to spider
• Vented Kapton® voice coil former for excellent heat dissipation
• High strength Y35 ferrite motor structure (5mm larger over previous generation)
• Overhung voice coil ensures consistent magnetic flux for less speaker distortion
• Surface/flush tweeter cups use copper spring contacts for front-side servicing (tool included)
• Flush-mount threaded tweeter cup fits 3/8" thick panels using 1.5" hole-saw cutout
• Includes woofer phase plug when tweeter relocated to separate tweeter cup
• Removable motor cover for fitment in tight applications
• ICC+ (internal concealed crossover) 6dB with 12dB external option and -3dB tweeter attenuation
• 2-pin micro-Molex crossover connection that are secured using screws or zip ties
• Includes mounting hardware
• Includes cut-out template
• Grilles sold separately
Rockford Fosgate P2V2 6x8" 2-way convertible with internal/external crossover 75 watts RMS, 150 watts peak
• I.L.M. (Interchangeable Locking Mechanism) allows configuration as a coaxial or component system
• Upgradable to a 3-Way Component by adding the P3V2-25 midrange speaker
• Updated mounting flanges for direct fitment in new vehicles
• 3/4” (19 mm) Tetolon® inverted dome tweeter for reliable performance under stress
• Santoprene™ half-roll surround for low distortion and unmatched fatigue resistance
• 20-40% Mica reinforced Polypropylene curvilinear cone for enhanced rigidity and sonic quality
• Co-molded surround and cone body chemically bonded for high durability
• Surface/flush tweeter cups use copper spring contacts for front-side servicing (tool included)
• 15% glass-fiber reinforced PA66 injected molded composite basket
• Flush-mount threaded tweeter cup fits 3/8" thick panels using 1.5" hole-saw cutout
• Co-molded basket terminals for secure connectivity
• Includes woofer phase plug when tweeter relocated to separate tweeter cup
• Ultra-flexible braded tinsel leads securely stitched to spider
• Fatigue and tear resistant linear Nomex® spider
• Overhung voice coil ensures consistent magnetic flux for less speaker distortion
• Vented Kapton® voice coil former for excellent heat dissipation
• High strength Y35 ferrite motor structure (5mm larger over previous generation)
• 2-pin micro-Molex crossover connection that are secured using screws or zip ties
• Removable motor cover for fitment in tight applications
• ICC+ (internal concealed crossover) 6dB with 12dB external option and -3dB tweeter attenuation
• Includes mounting hardware
• Includes cut-out template
• Grilles sold separately
Rockford Fosgate P2V2 6.5" 2-way convertible with internal/external crossover 75 watts RMS, 150 watts peak, 2ohm
• I.L.M. (Interchangeable Locking Mechanism) allows configuration as a coaxial or component system
• 2Ω High Output (HO) version for direct OEM replacement
• Updated mounting flanges for direct fitment in new vehicles
• 3/4” (19 mm) Tetolon® inverted dome tweeter for reliable performance under stress
• Santoprene™ half-roll surround for low distortion and unmatched fatigue resistance
• 20-40% Mica reinforced Polypropylene curvilinear cone for enhanced rigidity and sonic quality
• 15% glass-fiber reinforced PA66 injected molded composite basket
• Co-molded surround and cone body chemically bonded for high durability
• Ultra-flexible braded tinsel leads securely stitched to spider
• Fatigue and tear resistant linear Nomex® spider
• Surface/flush tweeter cups use copper spring contacts for front-side servicing (tool included)
• Flush-mount threaded tweeter cup fits 3/8" thick panels using 1.5" hole-saw cutout
• Vented Kapton® voice coil former for excellent heat dissipation
• Includes woofer phase plug when tweeter relocated to separate tweeter cup
• Overhung voice coil ensures consistent magnetic flux for less speaker distortion
• High strength Y35 ferrite motor structure (5mm larger over previous generation)
• Removable motor cover for fitment in tight applications
• ICC+ (internal concealed crossover) 6dB with 12dB external option and -3dB tweeter attenuation
• 2-pin micro-Molex crossover connection that are secured using screws or zip ties
• Co-molded basket terminals for secure connectivity
• Includes mounting hardware
• Includes cut-out template
• Grilles sold separately
• Sold in pairs (2 each)
Rockford Fosgate P2V2 6.5" 2-way convertible with internal/external crossover 75 watts RMS, 150 watts peak
• I.L.M. (Interchangeable Locking Mechanism) allows configuration as a coaxial or component system
• Updated mounting flanges for direct fitment in new vehicles
• 3/4” (19 mm) Tetolon® inverted dome tweeter for reliable performance under stress
• Upgradable to a 3-Way Component by adding the P3V2-25 midrange speaker
• Flush-mount threaded tweeter cup fits 3/8" thick panels using 1.5" hole-saw cutout
• Surface/flush tweeter cups use copper spring contacts for front-side servicing (tool included)
• 15% glass-fiber reinforced PA66 injected molded composite basket
• Fatigue and tear resistant linear Nomex® spider
• Ultra-flexible braded tinsel leads securely stitched to spider
• Co-molded surround and cone body chemically bonded for high durability
• Santoprene™ half-roll surround for low distortion and unmatched fatigue resistance
• 20-40% Mica reinforced Polypropylene curvilinear cone for enhanced rigidity and sonic quality
• Vented Kapton® voice coil former for excellent heat dissipation
• Overhung voice coil ensures consistent magnetic flux for less speaker distortion
• Co-molded basket terminals for secure connectivity
• High strength Y35 ferrite motor structure (5mm larger over previous generation)
• Removable motor cover for fitment in tight applications
• Includes woofer phase plug when tweeter relocated to separate tweeter cup
• ICC+ (internal concealed crossover) 6dB with 12dB external option and -3dB tweeter attenuation
• 2-pin micro-Molex crossover connection that are secured using screws or zip ties
• Includes mounting hardware
• Includes cut-out template
• Grilles sold separately
• Sold in pairs (2 each)
Rockford Fosgate. 4x6" 3-way coaxial with internal crossover 75 watts RMS, 150 watts peak
Engineered to Fit. Built to Perform.
The P1 PUNCH speakers are simple, all-in-one upgrades for standard factory systems. The P1 are perfect for Basic OEM systems with single-speaker locations in doors or rear decks. Factory single cone drivers don’t have tweeters and replacing them with a 3-way coaxial will deliver a big leap in sound clarity and “punch”.
Kit Includes:
• (2) 4"x6" 4Ω Coaxial Speakers
• (2) Bass Blockers
• Installation Hardware
FEATURES AT A GLANCE
• Updated mounting flanges for direct fitment in new vehicles
• 3/4” (19 mm) Tetolon® inverted dome tweeter for reliable performance under stress
• 3/8” (9 mm) Polypropylene piezo super tweeter for enhanced high-frequency response
• 20-40% Mica reinforced Polypropylene curvilinear cone for enhanced rigidity and sonic quality
• Santoprene™ half-roll surround for low distortion and unmatched fatigue resistance
• Co-molded surround and cone body chemically bonded for high durability
• Fatigue and tear resistant linear Nomex® spider
• Ultra-flexible braded tinsel leads securely stitched to spider
• 15% glass-fiber reinforced PA66 injected molded composite basket
• Vented Kapton® voice coil former for excellent heat dissipation
• Overhung voice coil ensures consistent magnetic flux for less speaker distortion
• High strength Y35 ferrite motor structure (5mm larger over previous generation)
• Removable motor cover for fitment in tight applications
• Co-molded basket terminals for secure connectivity
• ICC+ internal concealed 6dB/octave crossover network
• Includes external “bass blocker” 6dB/octave crossover
• Includes installation adaptor plate
• Includes mounting hardware
• Includes cut-out template
• Grilles sold separately
• Sold in pairs (2 each)
Rockford Fosgate. 6x9" 3-way coaxial with internal crossover 75 watts RMS, 150 watts peak
• Updated mounting flanges for direct fitment in new vehicles
• 3/4” (19 mm) Tetolon® inverted dome tweeter for reliable performance under stress
• 3/8” (9 mm) Polypropylene piezo super tweeter for enhanced high-frequency response
• 20-40% Mica reinforced Polypropylene curvilinear cone for enhanced rigidity and sonic quality
• Santoprene™ half-roll surround for low distortion and unmatched fatigue resistance
• Co-molded surround and cone body chemically bonded for high durability
• Fatigue and tear resistant linear Nomex® spider
• Ultra-flexible braded tinsel leads securely stitched to spider
• 15% glass-fiber reinforced PA66 injected molded composite basket
• Vented Kapton® voice coil former for excellent heat dissipation
• Overhung voice coil ensures consistent magnetic flux for less speaker distortion
• High strength Y35 ferrite motor structure (5mm larger over previous generation)
• Removable motor cover for fitment in tight applications
• Co-molded basket terminals for secure connectivity
• ICC+ internal concealed 6dB/octave crossover network
• Includes mounting hardware
• Includes cut-out template
• Grilles sold separately
• Sold in pairs (2 each)
Rockford Fosgate. 6x8" 3-way coaxial with internal crossover 75 watts RMS, 150 watts peak
• Updated mounting flanges for direct fitment in new vehicles
• 3/4” (19 mm) Tetolon® inverted dome tweeter for reliable performance under stress
• 3/8” (9 mm) Polypropylene piezo super tweeter for enhanced high-frequency response
• 20-40% Mica reinforced Polypropylene curvilinear cone for enhanced rigidity and sonic quality
• Santoprene™ half-roll surround for low distortion and unmatched fatigue resistance
• Co-molded surround and cone body chemically bonded for high durability
• Fatigue and tear resistant linear Nomex® spider
• Ultra-flexible braded tinsel leads securely stitched to spider
• 15% glass-fiber reinforced PA66 injected molded composite basket
• Vented Kapton® voice coil former for excellent heat dissipation
• Overhung voice coil ensures consistent magnetic flux for less speaker distortion
• High strength Y35 ferrite motor structure (5mm larger over previous generation)
• Removable motor cover for fitment in tight applications
• Co-molded basket terminals for secure connectivity
• ICC+ internal concealed 6dB/octave crossover network
• Includes mounting hardware
• Includes cut-out template
• Grilles sold separately
• Sold in pairs (2 each)
Rockford Fosgate. 6.5" 3-way coaxial with internal crossover 75 watts RMS, 150 watts peak
• Updated mounting flanges for direct fitment in new vehicles
• 3/4” (19 mm) Tetolon® inverted dome tweeter for reliable performance under stress
• 3/8” (9 mm) Polypropylene piezo super tweeter for enhanced high-frequency response
• 20-40% Mica reinforced Polypropylene curvilinear cone for enhanced rigidity and sonic quality
• Santoprene™ half-roll surround for low distortion and unmatched fatigue resistance
• Co-molded surround and cone body chemically bonded for high durability
• Fatigue and tear resistant linear Nomex® spider
• Ultra-flexible braded tinsel leads securely stitched to spider
• 15% glass-fiber reinforced PA66 injected molded composite basket
• Vented Kapton® voice coil former for excellent heat dissipation
• Overhung voice coil ensures consistent magnetic flux for less speaker distortion
• High strength Y35 ferrite motor structure (5mm larger over previous generation)
• Removable motor cover for fitment in tight applications
• Co-molded basket terminals for secure connectivity
• ICC+ internal concealed 6dB/octave crossover network
• Includes mounting hardware
• Includes cut-out template
• Grilles sold separately
• Sold in pairs (2 each)
Rockford Fosgate. 6" 3-way coaxial with internal crossover 75 watts RMS, 150 watts peak
• Updated mounting flanges for direct fitment in new vehicles
• 3/4” (19 mm) Tetolon® inverted dome tweeter for reliable performance under stress
• 3/8” (9 mm) Polypropylene piezo super tweeter for enhanced high-frequency response
• 20-40% Mica reinforced Polypropylene curvilinear cone for enhanced rigidity and sonic quality
• Santoprene™ half-roll surround for low distortion and unmatched fatigue resistance
• Co-molded surround and cone body chemically bonded for high durability
• Fatigue and tear resistant linear Nomex® spider
• Ultra-flexible braded tinsel leads securely stitched to spider
• 15% glass-fiber reinforced PA66 injected molded composite basket
• Vented Kapton® voice coil former for excellent heat dissipation
• Overhung voice coil ensures consistent magnetic flux for less speaker distortion
• High strength Y35 ferrite motor structure (5mm larger over previous generation)
• Removable motor cover for fitment in tight applications
• Co-molded basket terminals for secure connectivity
• ICC+ internal concealed 6dB/octave crossover network
• Includes mounting hardware
• Includes cut-out template
• Grilles sold separately
• Sold in pairs (2 each)
Rockford Fosgate. 5.25" 3-way coaxial with internal crossover 75 watts RMS, 150 watts peak
• Updated mounting flanges for direct fitment in new vehicles
• 3/4” (19 mm) Tetolon® inverted dome tweeter for reliable performance under stress
• 3/8” (9 mm) Polypropylene piezo super tweeter for enhanced high-frequency response
• 20-40% Mica reinforced Polypropylene curvilinear cone for enhanced rigidity and sonic quality
• Santoprene™ half-roll surround for low distortion and unmatched fatigue resistance
• Co-molded surround and cone body chemically bonded for high durability
• Fatigue and tear resistant linear Nomex® spider
• Ultra-flexible braded tinsel leads securely stitched to spider
• 15% glass-fiber reinforced PA66 injected molded composite basket
• Vented Kapton® voice coil former for excellent heat dissipation
• Overhung voice coil ensures consistent magnetic flux for less speaker distortion
• High strength Y35 ferrite motor structure (5mm larger over previous generation)
• Removable motor cover for fitment in tight applications
• Co-molded basket terminals for secure connectivity
• ICC+ internal concealed 6dB/octave crossover network
• Includes installation adaptor plate
• Includes mounting hardware
• Includes cut-out template
• Grilles sold separately
• Sold in pairs (2 each)
Rockford Fosgate. 4" 3-way coaxial with internal crossover 75 watts RMS, 150 watts peak
Engineered to Fit. Built to Perform.
The P1 PUNCH speakers are simple, all-in-one upgrades for standard factory systems. The P1 are perfect for Basic OEM systems with single-speaker locations in doors or rear decks. Factory single cone drivers don’t have tweeters and replacing them with a 3-way coaxial will deliver a big leap in sound clarity and “punch”.
Kit Includes:
• (2) 4" 4Ω Coaxial Speakers
• (2) Bass Blockers
• (6) OEM Adaptors
• Installation Hardware
FEATURES AT A GLANCE
• Updated mounting flanges for direct fitment in new vehicles
• 3/4” (19 mm) Tetolon® inverted dome tweeter for reliable performance under stress
• 3/8” (9 mm) Polypropylene piezo super tweeter for enhanced high-frequency response
• 20-40% Mica reinforced Polypropylene curvilinear cone for enhanced rigidity and sonic quality
• Santoprene™ half-roll surround for low distortion and unmatched fatigue resistance
• Co-molded surround and cone body chemically bonded for high durability
• Fatigue and tear resistant linear Nomex® spider
• Ultra-flexible braded tinsel leads securely stitched to spider
• 15% glass-fiber reinforced PA66 injected molded composite basket
• Vented Kapton® voice coil former for excellent heat dissipation
• Overhung voice coil ensures consistent magnetic flux for less speaker distortion
• High strength Y35 ferrite motor structure (5mm larger over previous generation)
• Co-molded basket terminals for secure connectivity
• ICC+ internal concealed 6dB/octave crossover network
• Includes external “bass blocker” 6dB/octave crossover
• Includes installation adaptor plate
• Includes mounting hardware
• Includes cut-out template
• Grilles sold separately
• Sold in pairs (2 each)
Rockford Fosgate. 3.5" 3-way coaxial with internal crossover 75 watts RMS, 150 watts peak
Engineered to Fit. Built to Perform.
The P1 PUNCH speakers are simple, all-in-one upgrades for standard factory systems. The P1 are perfect for Basic OEM systems with single-speaker locations in doors or rear decks. Factory single cone drivers don’t have tweeters and replacing them with a 3-way coaxial will deliver a big leap in sound clarity and “punch”.
Kit Includes:
• (2) 3.5" 4Ω Coaxial Speakers
• (2) Bass Blockers
• (4) OEM Adaptors
• Installation Hardware
FEATURES AT A GLANCE
• Updated mounting flanges for direct fitment in new vehicles
• 3/4” (19 mm) Tetolon® inverted dome tweeter for reliable performance under stress
• 3/8” (9 mm) Polypropylene piezo super tweeter for enhanced high-frequency response
• 20-40% Mica reinforced Polypropylene curvilinear cone for enhanced rigidity and sonic quality
• Santoprene™ half-roll surround for low distortion and unmatched fatigue resistance
• Co-molded surround and cone body chemically bonded for high durability
• Fatigue and tear resistant linear Nomex® spider
• Ultra-flexible braded tinsel leads securely stitched to spider
• 15% glass-fiber reinforced PA66 injected molded composite basket
• Vented Kapton® voice coil former for excellent heat dissipation
• Overhung voice coil ensures consistent magnetic flux for less speaker distortion
• High strength Y35 ferrite motor structure (5mm larger over previous generation)
• Co-molded basket terminals for secure connectivity
• ICC+ internal concealed 6dB/octave crossover network
• Includes external “bass blocker” 6dB/octave crossover
• Includes installation adaptor plate
• Includes mounting hardware
• Includes cut-out template
• Grilles sold separately
• Sold in pairs (2 each)
Rockford Fosgate. 2.5" 3-way coaxial with internal crossover 75 watts RMS, 150 watts peak
Engineered to Fit. Built to Perform.
The P1 PUNCH speakers are simple, all-in-one upgrades for standard factory systems. The P1 are perfect for Basic OEM systems with single-speaker locations in doors or rear decks. Factory single cone drivers don’t have tweeters and replacing them with a 3-way coaxial will deliver a big leap in sound clarity and “punch”.
Kit Includes:
• (2) 2.5" 4Ω Coaxial Speakers
• (2) Bass Blockers
• (2) OEM Adaptors
• Installation Hardware
FEATURES AT A GLANCE
• Updated mounting flanges for direct fitment in new vehicles
• 3/4” (19 mm) Tetolon® inverted dome tweeter for reliable performance under stress
• 3/8” (9 mm) Polypropylene piezo super tweeter for enhanced high-frequency response
• 20-40% Mica reinforced Polypropylene curvilinear cone for enhanced rigidity and sonic quality
• Santoprene™ half-roll surround for low distortion and unmatched fatigue resistance
• Co-molded surround and cone body chemically bonded for high durability
• Fatigue and tear resistant linear Nomex® spider
• Ultra-flexible braded tinsel leads securely stitched to spider
• 15% glass-fiber reinforced PA66 injected molded composite basket
• Vented Kapton® voice coil former for excellent heat dissipation
• Overhung voice coil ensures consistent magnetic flux for less speaker distortion
• High strength Y35 ferrite motor structure (5mm larger over previous generation)
• Co-molded basket terminals for secure connectivity
• ICC+ internal concealed 6dB/octave crossover network
• Includes external “bass blocker” 6dB/octave crossover
• Includes installation adaptor plate
• Includes mounting hardware
• Includes cut-out template
• Grilles sold separately
• Sold in pairs (2 each)
The AudioControl EPIC Series 6-Channel 1200 Watt RMS Amplifier is a compact, full range class D amplifier engineered for flexibility, output, and reliability. Its high-current design delivers serious performance, while the Smart Auto-Reset Protection Circuit keeps everything running smoothly, even under demanding conditions.
Built for those who demand options—active 3-way front stage, 5-channel, active 6-channel, or a powerful bridged configuration. Whatever your design calls for, EPICSIX fits the plan and delivers. One amplifier delivers so many possibilities, giving you the freedom to build, tune and evolve your system, not limit it.
This crossover configuration ensures proper frequency distribution, improved sound clarity, and reliable speaker protection, while offering exceptional flexibility for a wide range of system designs. With adjustable high-pass and low-pass filters across multiple channels, EPICSIX allows precise tuning for active or passive setups, making it easy to adapt the amplifier to your design.
• Compact High-Power Class D Amplifier
• High-Current Design, 2 ohms Stable
• 6 x 100 Watts @ 4 ohms
• 6 x 200 Watts @ 2 ohms
• 2 x 400 Watts @ 4 ohms Bridged (Ch. 3/4 & 5/6)
• Smart Auto-Reset Protection Circuit
• 12 dB/octave Linkwitz-Riley Variable High Pass (Ch 1-6) & Low Pass Filters (Ch 3-6)
• Solid Power/Speaker Terminals with Hex Screws
Line-Level Inputs: 500mV – 12V RMS
Continuous Power (RMS) @ 14.4V, <1% THD
6 x 100 Watts @ 4 ohms
6 x 200 Watts @ 2 ohms
2 x 400 Watts @ 4 ohms Bridged
DIMENSIONS (WxLxH): 6.1″ x 12.56″ x 2.01″ / 155mm x 319mm x 51mm
Frequency Response (+/- 3 dB): 10 Hz – 24 kHz
S/N Ratio: 98 dBa, Ref 100 Watts @ 4 ohms
Power / Ground Wire Gauge: 4 AWG
Recommended Fuse Rating: 125 Amps
High Pass Filter: 12dB/octave Linkwitz-Riley, Off, 50 Hz to 5000 Hz
Low Pass Filter: 12dB/octave Linkwitz-Riley, 50 Hz to 5000 Hz
Speaker Terminal Wire Gauge: 10 AWG
IN THE BOX: EPICSIX Amplifier, Wrench, Screws, Manual
The AudioControl EPIC Series 5-Channel Amplifier delivers top-quality sound in a compact, thermally efficient design, all at an unbeatable price. Engineered with a high-current Class D design, ensuring maximum power output while maintaining efficiency. Perfectly paired with The Epicenter Bass Restoration Processor (sold separately), it enhances your bass experience to new levels. This amplifier offers exceptional sound quality for the price and is the only AudioControl amplifier to include a bass knob for easy control.
Digital Class-D Amplifier: Powerful yet compact, designed to handle 2 ohm loads for high output.
0-12dB Variable Bass Boost Q: Selects the frequency to boost
Direct Wire Terminals with Hex Screws: Provide solid, reliable connections.
4-Gauge Power Terminal and 8-Gauge Speaker Terminal: Designed for maximum current flow.
91dB+ Signal-to-Noise Ratio (@ CEA Standard): Ultra-efficient idle draw (< 0.5-1A).
Smart Auto Reset Protection Circuit: Multiple protection modes are in place to prevent damage if your amplifier encounters an issue.
Output Over-Current Protection (OCP)
Input Over-Voltage Protection (OVP)
Input Under-Voltage Protection (UVP)
Output DC-Offset Protection (DCP)
Over-Temperature Protection (OTP)
Included ACR-E Remote Control knob
THE EPICENTER LINK: Simplify your install by connecting the EPIC amplifier directly to an EPICENTER bass restoration processor.
• Compact High-Power Class D Amplifier
• High-Current Design
• 4 x 75 Watts + 1 x 300 Watts @ 4 ohms
• 4 x 150 Watts + 1 x 500 Watts @ 2 ohms
• 1 x 700 Watts @ 1 ohm
• 2 x 300 Watts @ 4 ohms Bridged
• Smart Auto-Reset Protection Circuit
• 12 dB/octave Linkwitz-Riley Variable HP/LP Filters
• 12 dB/octave Variable Subsonic Filter
• Solid Power/Speaker Terminals with Hex Screws
• Built for THE EPICENTER®
Line-Level Inputs: 500mV – 12V RMS
Continuous Power (RMS) @ 14.4V
4 x 75 Watts + 1 x 300 Watts @ 4 ohms
4 x 150 Watts + 1 x 500 Watts @ 2 ohms
1 x 700 Watts @ 1 ohm (subwoofer output)
2 x 300 Watts @ 4 ohms Bridged
DIMENSIONS: 6.1″ W x 13.35″ L x 2.01″ H
Frequency Response (+/- 1 dB):
10 Hz – 24 kHz (Ch1/2/3/4)
12 Hz – 181 Hz (Ch5)
S/N Ratio: 92.1 dBa, Ref 75 Watts @ 4 ohms
Power / Ground Wire Gauge: 4 AWG
Recommended Fuse Rating: 150 Amps
High Pass Filter: 12dB/octave Linkwitz-Riley, Off, 50 Hz to 500 Hz
Low Pass Filter: 12dB/octave Linkwitz-Riley, 40 Hz to 180 Hz
Subsonic Filter: 12 dB/octave Linkwitz-Riley, Off to 50 Hz
EPIC Boost: Frequency Center: 45 Hz, Gain: 0 to 12 dB
Speaker Terminal Wire Gauge: 8 AWG
IN THE BOX: EPICFIVE, Wrench, Screws, ACR-E Remote Level Control and Cable, The Epicenter Link (1 meter harness), Manual, Warranty
The AudioControl EPIC Series 4-Channel Amplifier delivers top-quality sound in a compact, thermally efficient design. Engineered with a high-current Class D design, it’s 2Ω stable, ensuring maximum power output while maintaining efficiency. With a smart auto-reset protection circuit and solid power/speaker terminals secured by hex screws, the EPIC Series amplifier offers reliable, exceptional sound quality in a rugged, space-saving package. The EPICBIGFOUR is designed to deliver massive power at 1400W RMS.
Digital Class-D Amplifier: Powerful yet compact, designed to handle 2 ohm loads for high output.
Direct Wire Terminals with Hex Screws: Provide solid, reliable connections.
4-Gauge Power Terminal and 8-Gauge Speaker Terminal: Designed for maximum current flow.
89dB+ Signal-to-Noise Ratio (@ CEA Standard): Ultra-efficient idle draw (< 0.5-1A).
Smart Auto Reset Protection Circuit: Multiple protection modes are in place to prevent damage if your amplifier encounters an issue.
Output Over-Current Protection (OCP)
Input Over-Voltage Protection (OVP)
Input Under-Voltage Protection (UVP)
Output DC-Offset Protection (DCP)
Over-Temperature Protection (OTP)
EPICENTER Link: Compatible with The EPICENTER bass restoration processor.
• Compact High-Power Class D Amplifier
• High-Current Design – 2Ω Stable
• 4 x 200 Watts @ 4 ohms
• 4 x 350 Watts @ 2 ohms
• 2 x 650 Watts @ 4 ohms Bridged
• Smart Auto-Reset Protection Circuit
• 12 dB/octave Linkwitz-Riley Variable High Pass & Low Pass Filters
• Solid Power/Speaker Terminals with Hex Screws
• ACR-E Remote Bass Knob Included
Line-Level Inputs: 500mV – 12V RMS
Continuous Power (RMS) @ 14.4V
4 x 200 Watts @ 4 ohms
4 x 350 Watts @ 2 ohms
2 x 650 Watts @ 4 ohms Bridged
DIMENSIONS: 6.1″ W x 10.56″ L x 2.01″ H
Frequency Response (+/- 1 dB): 10 Hz – 22 kHz
S/N Ratio: 89 dBa, Ref 200 Watts @ 4 ohms
Power / Ground Wire Gauge: 4 AWG
Recommended Fuse Rating: 150 Amps
High Pass Filter: 12dB/octave Linkwitz-Riley, Off, 50 Hz to 5000 Hz
Low Pass Filter: 12dB/octave Linkwitz-Riley, Off, 50 Hz to 5000 Hz
Speaker Terminal Wire Gauge: 8 AWG
IN THE BOX: EPICBIGFOUR, Wrench, Screws, ACR-E Remote Level Control & Cable, Manual, Warranty
The AudioControl EPIC Series 4-Channel Amplifier delivers top-quality sound in a compact, thermally efficient design. Engineered with a high-current Class D design, it’s 2Ω stable, ensuring maximum power output while maintaining efficiency. With a smart auto-reset protection circuit and solid power/speaker terminals secured by hex screws, the EPIC Series amplifier offers reliable, exceptional sound quality in a rugged, space-saving package.
Digital Class-D Amplifier: Powerful yet compact, designed to handle 2 ohm loads for high output.
Direct Wire Terminals with Hex Screws: Provide solid, reliable connections.
4-Gauge Power Terminal and 8-Gauge Speaker Terminal: Designed for maximum current flow.
91dB+ Signal-to-Noise Ratio (@ CEA Standard): Ultra-efficient idle draw (< 0.5-1A).
Smart Auto Reset Protection Circuit: Multiple protection modes are in place to prevent damage if your amplifier encounters an issue.
Output Over-Current Protection (OCP)
Input Over-Voltage Protection (OVP)
Input Under-Voltage Protection (UVP)
Output DC-Offset Protection (DCP)
Over-Temperature Protection (OTP)
• Compact High-Power Class D Amplifier
• High-Current Design – 2Ω Stable
• 4 x 100 Watts @ 4 ohms
• 4 x 200 Watts @ 2 ohms
• 2 x 400 Watts @ 4 ohms Bridged
• Smart Auto-Reset Protection Circuit
• 12 dB/octave Linkwitz-Riley Variable High Pass Filters
• Solid Power/Speaker Terminals with Hex Screws
Line-Level Inputs: 500mV – 12V RMS
Continuous Power (RMS) @ 14.4V
4 x 100 Watts @ 4 ohms
4 x 200 Watts @ 2 ohms
2 x 400 Watts @ 4 ohms Bridged
DIMENSIONS: 6.1″ W x 9.41″ L x 2.01″ H
Frequency Response (+/- 1 dB): 10 Hz – 22 kHz
S/N Ratio: 90.1 dBa, Ref 100 Watts @ 4 ohms
Power / Ground Wire Gauge: 4 AWG
Recommended Fuse Rating: 80 Amps
High Pass Filter: 12dB/octave Linkwitz-Riley, Off, 50 Hz to 500 Hz
Speaker Terminal Wire Gauge: 8 AWG
IN THE BOX: EPICFOUR, Wrench, Screws, Manual, Warranty
The AudioControl EPIC Series Amplifier delivers powerful, heart-pounding bass in a compact, thermally efficient design. Perfectly paired with The Epicenter Bass Restoration Processor (sold separately), it enhances your bass experience to new levels. This amplifier offers exceptional sound quality for the price and is the only AudioControl amplifier to include a bass knob for easy control.
Digital Class-D Amplifier: Powerful yet compact and stable down to a 1 ohm load.
0-12dB Variable Bass Boost Q: Selects the frequency to boost
Direct Wire Terminals with Hex Screws: Provide solid, reliable connections.
4-Gauge Power Terminal and 8-Gauge Speaker Terminal: Designed for maximum current flow.
91dB+ Signal-to-Noise Ratio (@ CEA Standard): Ultra-efficient idle draw (< 0.5-1A).
Smart Auto Reset Protection Circuit: Multiple protection modes are in place to prevent damage if your amplifier encounters an issue.
Output Over-Current Protection (OCP)
Input Over-Voltage Protection (OVP)
Input Under-Voltage Protection (UVP)
Output DC-Offset Protection (DCP)
Over-Temperature Protection (OTP)
THE EPICENTER LINK: Simplify your install by connecting the EPIC amplifier directly to an EPICENTER bass restoration processor.
• Compact High-Power Class D Monoblock Amplifier
• High-Current Design – 1Ω Stable
• Smart Auto-Reset Protection Circuit
• 12 dB/octave Linkwitz-Riley Variable Low Pass Filter
• 12 dB/octave Variable Subsonic Filter
• EPICBoost™ Variable Frequency Bass Boost
• ACR-E Remote Level Control Included
• Solid Power/Speaker Terminals with Hex Screws
• Built for THE EPICENTER®
Line-Level Inputs: 500mV – 12V RMS
Continuous Power (RMS) @ 14.4V, <1% THD
1 x 250 Watts @ 4 ohms
1 x 350 Watts @ 2 ohms
1 x 500 Watts @ 1 ohm
1 x 1000 Watts @ 2 ohms Bridged (Strapped)
Included
DIMENSIONS: 6.1″ W x 5.9″ L x 2.01″ H
Frequency Response (+/- 1 dB): 10 Hz – 190 Hz
S/N Ratio: 94 dBa, Ref 400 Watts @ 4 ohms
Power / Ground Wire Gauge: 4 AWG
Recommended Fuse Rating: 80 Amps
Low Pass Filter: 12dB/octave Linkwitz-Riley, 40 Hz to 180 Hz
Subsonic Filter: 12 dB/octave Linkwitz-Riley, Off to 50 Hz
EPIC Boost: Frequency Center: 30 Hz to 80 Hz, Gain: 0 to 12 dB
Speaker Terminal Wire Gauge: 8 AWG
Strapable: Yes
Epicenter Link: Yes
IN THE BOX: EPIC500, Wrench, Screws, ACR-E Remote Level Control and Cable, The Epicenter Link (1m Harness), Manual, Warranty
The AudioControl EPIC Series Amplifier delivers powerful, heart-pounding bass in a compact, thermally efficient design. Perfectly paired with The Epicenter Bass Restoration Processor (sold separately), it enhances your bass experience to new levels. This amplifier offers exceptional sound quality for the price and is the only AudioControl amplifier to include a bass knob for easy control.
Digital Class-D Amplifier: Powerful yet compact and stable down to a 1 ohm load.
0-12dB Variable Bass Boost Q: Selects the frequency to boost
Direct Wire Terminals with Hex Screws: Provide solid, reliable connections.
4-Gauge Power Terminal and 8-Gauge Speaker Terminal: Designed for maximum current flow.
91dB+ Signal-to-Noise Ratio (@ CEA Standard): Ultra-efficient idle draw (< 0.5-1A).
Smart Auto Reset Protection Circuit: Multiple protection modes are in place to prevent damage if your amplifier encounters an issue.
Output Over-Current Protection (OCP)
Input Over-Voltage Protection (OVP)
Input Under-Voltage Protection (UVP)
Output DC-Offset Protection (DCP)
Over-Temperature Protection (OTP)
THE EPICENTER LINK: Simplify your install by connecting the EPIC amplifier directly to an EPICENTER bass restoration processor.
• Compact High-Power Class D Monoblock Amplifier
• High-Current Design – 1Ω Stable
• Smart Auto-Reset Protection Circuit
• 12 dB/octave Linkwitz-Riley Variable Low Pass Filter
• 12 dB/octave Variable Subsonic Filter
• EPICBoost™ Variable Frequency Bass Boost
• ACR-E Remote Level Control Included
• Solid Power/Speaker Terminals with Hex Screws
• Built for THE EPICENTER®
Line-Level Inputs: 500mV – 12V RMS
Continuous Power (RMS) @ 14.4V
1 x 300 Watts @ 4 ohms
1 x 500 Watts @ 2 ohms
1 x 750 Watts @ 1 ohm
1 x 1500 Watts @ 2 ohms Bridged (Strapped)
Included
DIMENSIONS: 6.1″ W x 8.62″ L x 2.01″ H
Frequency Response (+/- 1 dB): 10 Hz – 190 Hz
S/N Ratio: 92.2 dBa, Ref 300 Watts @ 4 ohms
Power / Ground Wire Gauge: 4 AWG
Recommended Fuse Rating: 80 Amps
Low Pass Filter: 12dB/octave Linkwitz-Riley, 40 Hz to 180 Hz
Subsonic Filter: 12 dB/octave Linkwitz-Riley, Off to 50 Hz
EPIC Boost: Frequency Center: 30 Hz to 80 Hz, Gain: 0 to 12 dB
Speaker Terminal Wire Gauge: 8 AWG
Strapable: Yes
Epicenter Link: Yes
IN THE BOX: EPIC750, Wrench, Screws, ACR-E Remote Level Control and Cable, The Epicenter Link (1m Harness), Manual, Warranty
The AudioControl EPIC Series Amplifier delivers powerful, heart-pounding bass in a compact, thermally efficient design. Perfectly paired with The Epicenter Bass Restoration Processor (sold separately), it enhances your bass experience to new levels. This amplifier offers exceptional sound quality and is the only AudioControl amplifier to include a bass knob for easy control.
Digital Class-D Amplifier: Powerful yet compact and stable down to a 1 ohm load.
0-12dB Variable Bass Boost Q: Selects the frequency to boost
Direct Wire Terminals with Hex Screws: Provide solid, reliable connections.
4-Gauge Power Terminal and 8-Gauge Speaker Terminal: Designed for maximum current flow.
91dB+ Signal-to-Noise Ratio (@ CEA Standard): Ultra-efficient idle draw (< 0.5-1A).
Smart Auto Reset Protection Circuit: Multiple protection modes are in place to prevent damage if your amplifier encounters an issue.
Output Over-Current Protection (OCP)
Input Over-Voltage Protection (OVP)
Input Under-Voltage Protection (UVP)
Output DC-Offset Protection (DCP)
Over-Temperature Protection (OTP)
THE EPICENTER LINK: Simplify your install by connecting the EPIC amplifier directly to an EPICENTER bass restoration processor.
• Compact High-Power Class D Monoblock Amplifier
• High-Current Design – 1Ω Stable
• Smart Auto-Reset Protection Circuit
• 12 dB/octave Linkwitz-Riley Variable Low Pass Filter
• 12 dB/octave Variable Subsonic Filter
• EPICBoost™ Variable Frequency Bass Boost
• ACR-E Remote Level Control Included
• Solid Power/Speaker Terminals with Hex Screws
• Built for THE EPICENTER®
Line-Level Inputs: 500mV – 12V RMS
Continuous Power (RMS) @ 14.4V
1 x 400 Watts @ 4 ohms
1 x 700 Watts @ 2 ohms
1 x 1000 Watts @ 1 ohm
1 x 2000 Watts @ 2 ohms Bridged (Strapped)
Included
DIMENSIONS: 6.1″ W x 9.41″ L x 2.01″ H
Frequency Response (+/- 1 dB): 10 Hz – 190 Hz
S/N Ratio: 92.1 dBa, Ref 400 Watts @ 4 ohms
Power / Ground Wire Gauge: 4 AWG
Recommended Fuse Rating: 100 Amps
Low Pass Filter: 12dB/octave Linkwitz-Riley, 40 Hz to 180 Hz
Subsonic Filter: 12 dB/octave Linkwitz-Riley, Off to 50 Hz
EPIC Boost: Frequency Center: 30 Hz to 80 Hz, Gain: 0 to 12 dB
Speaker Terminal Wire Gauge: 8 AWG
Strapable: Yes
Epicenter Link: Yes
IN THE BOX: EPIC1000, Wrench, Screws, ACR-E Remote Level Control and Cable, The Epicenter Link (1m Harness), Manual, Warranty
The AudioControl EPIC Series Amplifier delivers powerful, heart-pounding bass in a compact, thermally efficient design. Perfectly paired with The Epicenter Bass Restoration Processor (sold separately), it enhances your bass experience to new levels. This amplifier offers exceptional sound quality and is the only AudioControl amplifier to include a bass knob for easy control.
Digital Class-D Amplifier: Powerful yet compact and stable down to a 1 ohm load.
0-12dB Variable Bass Boost Q: Selects the frequency to boost
Direct Wire Terminals with Hex Screws: Provide solid, reliable connections.
4-Gauge Power Terminal and 8-Gauge Speaker Terminal: Designed for maximum current flow.
91dB+ Signal-to-Noise Ratio (@ CEA Standard): Ultra-efficient idle draw (< 0.5-1A).
Smart Auto Reset Protection Circuit: Multiple protection modes are in place to prevent damage if your amplifier encounters an issue.
Output Over-Current Protection (OCP)
Input Over-Voltage Protection (OVP)
Input Under-Voltage Protection (UVP)
Output DC-Offset Protection (DCP)
Over-Temperature Protection (OTP)
THE EPICENTER LINK: Simplify your install by connecting the EPIC amplifier directly to an EPICENTER bass restoration processor.
• Compact High-Power Class D Monoblock Amplifier
• High-Current Design – 1Ω Stable
• Smart Auto-Reset Protection Circuit
• 12 dB/octave Linkwitz-Riley Variable Low Pass Filter
• 12 dB/octave Variable Subsonic Filter
• EPICBoost™ Variable Frequency Bass Boost
• ACR-E Remote Level Control Included
• Solid Power/Speaker Terminals with Hex Screws
• Built for THE EPICENTER®
Line-Level Inputs: 500mV – 12V RMS
Continuous Power (RMS) @ 14.4V
1 x 600 Watts @ 4 ohms
1 x 1000 Watts @ 2 ohms
1 x 1500 Watts @ 1 ohm
1 x 3000 Watts @ 2 ohms Bridged (Strapped)
Included
DIMENSIONS: 6.1″ W x 10.59″ L x 2.01″ H
Frequency Response (+/- 1 dB): 10 Hz – 190 Hz
S/N Ratio: 92.8 dBa, Ref 600 Watts @ 4 ohms
Power / Ground Wire Gauge: 4 AWG
Recommended Fuse Rating: 150 Amps
Low Pass Filter: 12dB/octave Linkwitz-Riley, 40 Hz to 180 Hz
Subsonic Filter: 12 dB/octave Linkwitz-Riley, Off to 50 Hz
EPIC Boost: Frequency Center: 30 Hz to 80 Hz, Gain: 0 to 12 dB
Speaker Terminal Wire Gauge: 8 AWG
Strapable: Yes
Epicenter Link: Yes
IN THE BOX: EPIC1500, Wrench, Screws, ACR-E Remote Level Control and Cable, The Epicenter Link (1m Harness), Manual, Warranty
The AudioControl EPIC Series Amplifier delivers powerful, heart-pounding bass in a compact, thermally efficient design. Perfectly paired with The Epicenter Bass Restoration Processor (sold separately), it enhances your bass experience to new levels. This amplifier offers exceptional sound quality and is the only AudioControl amplifier to include a bass knob for easy control.
Digital Class-D Amplifier: Powerful yet compact and stable down to a 1 ohm load.
0-12dB Variable Bass Boost Q: Selects the frequency to boost
Direct Wire Terminals with Hex Screws: Provide solid, reliable connections.
4-Gauge Power Terminal and 8-Gauge Speaker Terminal: Designed for maximum current flow.
91dB+ Signal-to-Noise Ratio (@ CEA Standard): Ultra-efficient idle draw (< 0.5-1A).
Smart Auto Reset Protection Circuit: Multiple protection modes are in place to prevent damage if your amplifier encounters an issue.
Output Over-Current Protection (OCP)
Input Over-Voltage Protection (OVP)
Input Under-Voltage Protection (UVP)
Output DC-Offset Protection (DCP)
Over-Temperature Protection (OTP)
THE EPICENTER LINK: Simplify your install by connecting the EPIC amplifier directly to an EPICENTER bass restoration processor.
• Compact High-Power Class D Monoblock Amplifier
• High-Current Design – 1Ω Stable
• Smart Auto-Reset Protection Circuit
• 12 dB/octave Linkwitz-Riley Variable Low Pass Filter
• 12 dB/octave Variable Subsonic Filter
• EPICBoost™ Variable Frequency Bass Boost
• ACR-E Remote Level Control Included
• Solid Power/Speaker Terminals with Hex Screws
• Built for THE EPICENTER®
Line-Level Inputs: 500mV – 12V RMS
Continuous Power (RMS) @ 14.4V
1 x 800 Watts @ 4 ohms
1 x 1400 Watts @ 2 ohms
1 x 2000 Watts @ 1 ohm
1 x 4000 Watts @ 2 ohms Bridged (Strapped)
Included
DIMENSIONS: 6.1″ W x 12.56″ L x 2.01″ H
Frequency Response (+/- 1 dB): 10 Hz – 190 Hz
S/N Ratio: 92.9 dBa, Ref 800 Watts @ 4 ohms
Power / Ground Wire Gauge: 0/1 AWG
Recommended Fuse Rating: 200 Amps
Low Pass Filter: 12dB/octave Linkwitz-Riley, 40 Hz to 180 Hz
Subsonic Filter: 12 dB/octave Linkwitz-Riley, Off to 50 Hz
EPIC Boost: Frequency Center: 30 Hz to 80 Hz, Gain: 0 to 12 dB
Speaker Terminal Wire Gauge: 4 AWG
Strapable: Yes
Epicenter Link: Yes
IN THE BOX: EPIC2000, Wrench, Screws, ACR-E Remote Level Control and Cable, The Epicenter Link (1m Harness), Manual, Warranty
The AudioControl EPIC Series Amplifier delivers massive, heart-pounding bass in a thermally efficient design. Perfectly paired with The EPICENTER Bass Restoration Processor (sold separately), it enhances your bass experience to insane levels. The EPIC4000 is the definitive engine for competition-grade audio. Engineered for extreme efficiency and uncompromising stability down to the lowest impedances, this amplifier is built with oversized components and advanced thermal management to deliver its rated wattage reliably, not just on the bench, but deep into every demanding track. It’s not just about loudness; it's about converting colossal power into pure low-frequency output that dominates the sound stage and achieves legendary SPL scores.
• High-Power, Competition-Grade Class D: Experience high performance and thermal efficiency that delivers monster power to the most demanding subwoofer systems.
• High-Current Design – 1Ω Stable: Provides massive, stable power output necessary to drive the most demanding low-impedance speaker loads at 4000W RMS @ 1 ohm.
• Smart Auto-Reset Protection Circuit: Multiple protection modes are in place to prevent damage if your amplifier should encounter an issue.
• 12 dB/octave Linkwitz-Riley Variable Low Pass & Subsonic Filters: Fine-tune your audio setup, matching your subwoofer’s frequency range for ground-shaking bass performance while protecting your subwoofers in vented enclosures.
• EPIC Boost Variable Frequency Bass Boost: Hear your bass slam with a variable frequency (30 to 80 Hz) bass equalizer with a boost range of 0 dB to +12 dB.
• Solid Power/Speaker Terminals with Hex Screws: Secures maximum current flow and signal integrity, ensuring low-resistance connections for consistent performance.
• EPICENTER Link: Simplify installation with the EPICENTER LINK (included) to seamlessly connect the EPIC amplifier and The EPICENTER bass restoration processor (sold separately) for an unbeatable bass experience and 1A fuse protection to safeguard your equipment.
• ACR-E Remote Level Control Included: Adjust your sound effortlessly with the included remote gain knob, giving you full control at your fingertips.
• Two 0-gauge power wires and two 0-gauge ground wires are required for this amplifier to function. This amp is living the high-current lifestyle!
• Each 0-gauge power wire must have a 200-amp fuse installed within 12 inches
of its connection to the battery. This amp likes its fuse like it likes its bass: close and reliable.
• Use only high-quality 0-gauge OFC (oxygen-free copper) wire for all power
and ground connections. Keep your power clean and your bass mean!
• Do NOT mount the amplifier to subwoofer enclosures. These two like their personal space.
Amplifier Topology. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Class D
Power Output RMS (14.4V, <1% THD). . . . . . . . . . . . . . . . . .1000 Watts @ 4 ohms
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2000 Watts @ 2 ohms
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4000 Watts @ 1 ohm
Frequency Response (+/- 1 dB). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Hz - 190 Hz
S/N Ratio. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104.8 dBa, Ref 1000 Watts @ 4 ohms
Power / Ground Wire Gauge. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0 AWG
Speaker Terminal Wire Gauge. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 AWG
Recommended Fuse Rating. . . . . . . . . . . . . . . . . . . . . 200 Amp x 2 / 400 Amps x 1
Low Pass Filter. . . . . . . . . . . . . . . . . . . 12dB/octave Linkwitz-Riley, 40 Hz to 180 Hz
Subsonic Filter. . . . . . . . . . . . . . . . . . . . . . 12 dB/octave Linkwitz-Riley, Off to 50 Hz
EPIC Boost. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 to 80 Hz, Gain: 0 to 12 dB
Line-level Inputs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.5 to 12 VRMS
Chassis Dimensions (LxWxH). . . . . . . . . . . . . . . . . . . . . . . . . . 21 in x 6.1 in x 2.04 in
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 533 mm × 155 mm × 52 mm
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Dimensions do not include connectors
IN THE BOX: EPIC4000 monoblock amplifier, wrench, screws, ACR-E remote level control and cable, THE EPICENTER LINK (1 meter harness), user manual
The Dual Solo-Baric® L7S™ 12-Inch Subwoofer Enclosure is a ready-made bass machine with a legendary pedigree.
The enclosure features the custom-designed vent/terminal cup with an extra thick front baffle and fortified back bracing for one of the sturdiest enclosures in the industry. Two Solo-Baric L7S 12-Inch Subwoofers pound out massive bass with a single 2Ω connection.
Features:
Genuine Solo-Baric® L7S™ Subwoofer Included
Custom Engineered Port Design
Heavy Internal Bracing
Single 2-Ohm Terminal
Easy To Install And Wire
Thick Black Carpeting
Rounded Corners
Embroidered KICKER Logo
Thick MDF Construction
*The Dual Solo-Baric L7S 12-Inch Subwoofer Enclosure works best with 1500 watts of recommended power. See below for more details.
Type dual Woofer [in, cm] Solo-Baric L7 12" 2Ω Impedance [Ohms] 2 Recommended Amplifier Power (watts RMS) 1500 Peak Power (watts, per ANSI/CTA-2031-A) 3000SENSITIVITY [dB 1w/1m] 89.9 Tuning Frequency [Hz] 30
Box Top Depth (in, cm):16-1/4, 41.3 Box Bottom Depth (in, cm):19-1/2, 19.4 Box Height (in, cm):16, 40.6 Box Width (in, cm):33-3/4, 85.7
What's in the box? one loaded enclosure with two 12-inch subwoofers
mounting hardware (4 - black brackets, 4 - #10 black wood screws x 20mm, 8 - #8 black wood screws 20mm long)
one owner's manual
two stickers
Warranty When purchased from an Authorized KICKER Dealer or kicker.com, KICKER warrants this product to be free from defects in material and workmanship under normal use for a period of ONE (1) YEARS from date of original purchase.
The Solo-Baric® L7S™ 12-Inch Subwoofer Enclosure is the easiest, loudest way to get legendary bass in your ride.
Made from thick, solid wood and brandishing a custom terminal/port combination, this loaded sub box is all bass – and all KICKER!
Features:
Genuine Solo-Baric® L7S™ Subwoofer Included
Custom Engineered Port Design
Heavy Internal Bracing
Single 2-Ohm Terminal
Easy To Install And Wire
Thick Black Carpeting
Rounded Corners
Embroidered KICKER Logo
Thick MDF Construction
*The Solo-Baric L7S 12-Inch Subwoofer Enclosure works best with 750 watts of recommended power. See below for more details.
Type single Woofer [in, cm] Solo-Baric L7 12" 4Ω Impedance [Ohms] 2 Recommended Amplifier Power (watts RMS) 750 Peak Power (watts, per ANSI/CTA-2031-A) 1500 SENSITIVITY [dB 1w/1m] 86.9 Tuning Frequency [Hz]33
Box Top Depth (in, cm):14-3/4, 37.4 Box Bottom Depth (in, cm):17-7/8, 45.5 Box Height (in, cm):16, 40.6 Box Width (in, cm):18-3/4, 47.6
What's in the box?one loaded enclosure with one 12-inch subwoofer
mounting hardware (4 - black brackets, 4 - #10 black wood screws x 20mm, 8 - #8 black wood screws 20mm long)
one owner's manual
two stickers
Warranty When purchased from an Authorized KICKER Dealer or kicker.com, KICKER warrants this product to be free from defects in material and workmanship under normal use for a period of ONE (1) YEARS from date of original purchase.
The Solo-Baric® L7S™ 10-Inch Subwoofer Enclosure is perfect for big bass in a small space.
Whether it’s mounted in a truck, sedan or hatchback, the massive power handling and tiny footprint lets you take your music everywhere you go – without the expense of a custom box.
Features:
Genuine Solo-Baric® L7S™ Subwoofer Included
Custom Engineered Port Design
Heavy Internal Bracing
Single 2-Ohm Terminal
Easy To Install And Wire
Thick Black Carpeting
Rounded Corners
Embroidered KICKER Logo
Thick MDF Construction
*The Solo-Baric L7S 10-Inch Subwoofer Enclosure works best with 600 watts of recommended power. See below for more details.
Type thin-profile Woofer [in, cm] Solo-Baric L7S 10" 2Ω Impedance [Ohms]2 Recommended Amplifier Power (watts RMS) 600 Peak Power (watts, per ANSI/CTA-2031-A) 1200 SENSITIVITY [dB 1w/1m] 89.5 Tuning Frequency [Hz]34
Box Top Depth (in, cm):6-1/2, 16.4 Box Bottom Depth (in, cm):10, 25.4 Box Height (in, cm):15, 38.1 Box Width (in, cm):21-1/2, 54.6 What's in the box?one loaded enclosure with one 10-inch subwoofer
mounting hardware (4 - black brackets, 4 - #10 black wood screws x 20mm, 8 - #8 black wood screws 20mm long)
one owner's manual
two stickers
Warranty When purchased from an Authorized KICKER Dealer or kicker.com, KICKER warrants this product to be free from defects in material and workmanship under normal use for a period of ONE (1) YEARS from date of original purchase.
The massive power handling of the dual L7R sub box only gets better with square subs! Packed with KICKER innovation, you get up to 20% more volume compared to a round driver, so you move more air and get more bass without the expense of a custom box.
Hook up a CX amp to this bass wedge to start Livin’ Loud!
Features:
Genuine L7R Subwoofer Included
Front-Facing Port Design for loudest possible bass
Angled Back for Excellent Fit
Heavy Internal Bracing makes is last for years
Single 2-Ohm Terminal for quick installation
Easy to Install and Wire
Thick Black Carpeting to handle bumps and scrapes
Aesthetically pleasing Rounded Corners
Embroidered KICKER Logo
Thick MDF Construction
*The powerful L7R 12-Inch Dual Subwoofer Enclosure works best with 1,200 watts of recommended power. See below for more details.
Type dual Woofers/size [in, cm] 2 Solo-Baric L7R 12" 2Ω Impedance [Ohms]2 Recommended Amplifier Power [watts RMS]1200 SENSITIVITY [dB 1w/1m]95 Tuning Frequency [Hz]31
Box Top Depth (in, cm):15-1/4, 38.7 Box Bottom Depth (in, cm):20-3/8, 51.8 Box Height (in, cm):15-7/8, 40.2 Box Width (in, cm):33-3/4, 85.7
What's in the box? one loaded enclosure with two 12-inch subwoofers
mounting hardware (4 - black brackets, 4 - #10 black wood screws x 20mm, 8 - #8 black wood screws 20mm long)
one owner's manual
two stickers
Warranty When purchased from an Authorized KICKER Dealer or kicker.com, KICKER warrants this product to be free from defects in material and workmanship under normal use for a period of ONE (1) YEARS from date of original purchase.
KICKER’s square-sub technology features patented ribbed corners, UniPlate™ solid pole piece and backplate, and injection-molded SoloKon™ cone system. You get up to 20% more volume compared to a round driver, so you move more air and get more bass! Combined with an optimized port, reinforced MDF construction, rounded corners and thick black carpet, you get big bass without the expense of a custom enclosure.
Hook up a CX amp to this bass wedge to start Livin’ Loud!
Features:
Genuine L7R Subwoofer Included
Front-Facing Port Design for loudest possible bass
Angled Back for Excellent Fit
Heavy Internal Bracing makes is last for years
Single 2-Ohm Terminal for quick installation
Easy to Install and Wire
Thick Black Carpeting to handle bumps and scrapes
Aesthetically pleasing Rounded Corners
Embroidered KICKER Logo
Thick MDF Construction
*The compact L7R 12-inch Subwoofer Enclosure works best with 600 watts of recommended power. See below for more details.
Type single Woofer [in, cm] Solo-Baric L7R 12" 2Ω Impedance [Ohms]2 Recommended Amplifier Power [watts RMS] 600 SENSITIVITY [dB 1w/1m] 94 Tuning Frequency [Hz]33
Box Top Depth (in, cm):8-1/2, 21.7 Box Bottom Depth (in, cm):14-7/8, 37.8 Box Height (in, cm):15, 38.1 Box Width (in, cm):28, 71.1
What's in the box?one loaded enclosure with one 12-inch subwoofer
mounting hardware (4 - black brackets, 4 - #10 black wood screws x 20mm, 8 - #8 black wood screws 20mm long)
one owner's manual
two stickers
Warranty When purchased from an Authorized KICKER Dealer or kicker.com, KICKER warrants this product to be free from defects in material and workmanship under normal use for a period of ONE (1) YEARS from date of original purchase.
KICKER’s square sub technology features patented ribbed corners, UniPlate™ solid pole piece and backplate, and injection-molded SoloKon™ cone technology – joining the cone to the vented back brace. You get up to 20% more volume compared to a round driver, so you move more air and get more bass! Our engineers used reinforced MDF construction, rounded corners and thick black carpet to get big bass without the expense of a custom enclosure.
Hook up a CX amp to this bass wedge to start Livin’ Loud!
Features:
Genuine L7R Subwoofer Included
Custom Engineered Port Design for loudest possible bass
Heavy Internal Bracing makes is last for years
Single 2-Ohm Terminal for quick installation
Easy to Install and Wire
Thick Black Carpeting to handle bumps and scrapes
Aesthetically pleasing Rounded Corners
Embroidered KICKER Logo
Thick MDF Construction
*The compact L7R 10-inch Subwoofer Enclosure works best with 500 watts of recommended power. See below for more details.
Type single truck Woofer [in, cm]Solo-Baric L7R 10" 2Ω Impedance [Ohms]2 Recommended Amplifier Power [watts RMS]500 SENSITIVITY [dB 1w/1m]88Tuning Frequency [Hz]34
Box Top Depth (in, cm):6-1/2, 16.4 Box Bottom Depth (in, cm):10, 25.4 Box Height (in, cm):15, 38.1 Box Width (in, cm):21-1/2, 54.6
What's in the box?one loaded enclosure with one 10-inch subwoofer
mounting hardware (4 - black brackets, 4 - #10 black wood screws x 20mm, 8 - #8 black wood screws 20mm long)
one owner's manual
two stickers
Warranty When purchased from an Authorized KICKER Dealer or kicker.com, KICKER warrants this product to be free from defects in material and workmanship under normal use for a period of ONE (1) YEARS from date of original purchase.
KICKER’s square sub technology features patented ribbed corners, UniPlate™ solid pole piece and backplate, and injection-molded SoloKon™ cone system. You get up to 20% more volume compared to a round driver, so you move more air and get more bass! Combined with an optimized front-facing port, reinforced MDF construction, rounded corners and thick black carpet, you get big bass without the expense of a custom enclosure.
Hook up a CX amp to this bass wedge to start Livin’ Loud!
Features:
Genuine L7R Subwoofer Included
Front-Facing Port Design for loudest possible bass
Angled Back for Excellent Fit
Heavy Internal Bracing makes is last for years
Single 2-Ohm Terminal for quick installation
Easy to Install and Wire
Thick Black Carpeting to handle bumps and scrapes
Aesthetically pleasing Rounded Corners
Embroidered KICKER Logo
Thick MDF Construction
*The compact L7R 10-inch Subwoofer Enclosure works best with 500 watts of recommended power. See below for more details.
Type single Woofer [in, cm] Solo-Baric L7R 10" 2Ω Impedance [Ohms]2 Recommended Amplifier Power [watts RMS]500 SENSITIVITY [dB 1w/1m]88.8 Tuning Frequency [Hz]33
Box Top Depth (in, cm):8-1/4, 21 Box Bottom Depth (in, cm):13-7/8, 35.1 Box Height (in, cm):13, 33 Box Width (in, cm):24, 61 What's in the box? one loaded enclosure with one 10-inch subwoofer mounting hardware (4 - black brackets, 4 - #10 black wood screws x 20mm, 8 - #8 black wood screws 20mm long) one owner's manual two stickers
Warranty When purchased from an Authorized KICKER Dealer or kicker.com, KICKER warrants this product to be free from defects in material and workmanship under normal use for a period of ONE (1) YEARS from date of original purchase.
Requires amp and handles 1,000 watts RMS
Single 2-Ohm terminal
Dual KICKER Solo-Baric L7T Square Subwoofers
Thick black carpeting
MDF construction and heavy internal bracing
Made from thick MDF and formed specifically to fit every contour of your Tacoma, this custom enclosure features a pair of front-firing L7T 10-inch subwoofers with a monstrous 1,000-watts of recommended power. See details below.
It’s simple – more cone area means more air moves – for more bass and up to 20% more cone area than a conventional round sub. KICKER acoustic engineers put the largest voice coil and magnet we’ve ever integrated into a thin sub, then added a next-level top-plate design, unique heat management system and our signature cone stitching all help to give you deep bass and outstanding reliability in a single, mind-blowing design that gives you max output!
TYPE: Vehicle-Specific Design: Dual Front-Fire with grilles WOOFER SIZE (in, cm):10, 25 IMPEDANCE (Ohms):2 Recommended Amplifier Power (watts RMS):500-1000
FREQUENCY RESPONSE (Hz):25-100 BOX DIMENSIONS:Width: 48-1/2” [123.2cm] Height: 16” [40.7cm] Depth: 8” [20.5cm] Warranty When purchased from an Authorized KICKER Dealer or kicker.com, KICKER warrants this product to be free from defects in material and workmanship under normal use for a period of ONE (1) YEARS from date of original purchase.
Requires amp and handles 1,000 watts RMS
Single 2-Ohm terminal
Dual KICKER Solo-Baric L7T Square Subwoofers
Thick black carpeting
Protective grilles included
MDF construction and heavy internal bracing
Made from thick MDF and formed specifically to fit every contour of your RAM, this custom enclosure features a pair of up-firing L7T 10-inch subwoofers and grilles with a monstrous 1,000-watts of recommended power. See details below.
It’s simple – more cone area means more air moves – for more bass and up to 20% more cone area than a conventional round sub. KICKER acoustic engineers put the largest voice coil and magnet we’ve ever integrated into a thin sub, then added a next-level top-plate design, unique heat management system and our signature cone stitching all help to give you deep bass and outstanding reliability in a single, mind-blowing design that gives you max output!
There is some year-overlap between RAM Classic cabs and RAM newer generations. Here's how to determine what enclosure model your truck requires. If your truck has a large flat floor under the backseat, with no molded wall or cup holder, then that is the 5th-Generation style (KICKER K5RDL7T102).
TYPE: Vehicle-Specific Design: Dual Up-Fire with grilles WOOFER SIZE (in, cm):10, 25 IMPEDANCE (Ohms):2 Recommended Amplifier Power (watts RMS):500-1000
FREQUENCY RESPONSE (Hz):25-100 BOX DIMENSIONS: Width: 50-9/16” [128.4cm] Height: 7-5/8” [19.3cm] Depth: 16-3/8” [41.6cm] Warranty When purchased from an Authorized KICKER Dealer or kicker.com, KICKER warrants this product to be free from defects in material and workmanship under normal use for a period of ONE (1) YEARS from date of original purchase.
Requires amp and handles 600 watts RMS
Single 2-Ohm terminal
Single KICKER Solo-Baric L7T Square Subwoofer
Heavy-duty weather-resistant, roto-molded enclosure
Includes custom tailgate-mount design and hardware
Formed specifically to fit with a custom mount on the inner tailgate, this weather-resistant enclosure features a single front-firing L7T 12-inch subwoofer with a thundering 600 watts of recommended power. See details below.
It’s simple – more cone area means more air moves – for more bass, with up to 20% more cone area than a conventional round sub. KICKER acoustic engineers put the largest voice coil and magnet we’ve ever integrated into a thin sub, then added a next-level top-plate design, unique heat management system and our signature cone stitching all help to give you deep bass and outstanding reliability in a single, mind-blowing design that gives you max output!
TYPE: Vehicle-Specific Design: Single Front-Fire with grille WOOFER SIZE (in, cm):12,30 IMPEDANCE (Ohms):2 Recommended Amplifier Power (watts RMS):300-600
FREQUENCY RESPONSE (Hz):25-100 BOX DIMENSIONS: Width: 30-7/16” [77.3cm] Height: 13-7/16” [34.2cm] Depth: 9” [22.8cm] Warranty When purchased from an Authorized KICKER Dealer or kicker.com, KICKER warrants this product to be free from defects in material and workmanship under normal use for a period of ONE (1) YEAR from date of original purchase.
The CS-Series 6-1/2-inch Component Speakers are an outstanding factory upgrade.
Designed for easy installation in nearly any vehicle, CS-Series components include separate titanium tweeters and two-way crossovers with tweeter level control to let you customize your sound for the best sonic quality. The result is precise control with stunning musical realism.
Use the flush, angled or surface-mount tweeter pods to perfect your imaging and get a sophisticated look!
These CS-Series speakers work best with 100 watts of recommended power. See below for more details.
Fits nearly every car made
12dB crossovers with a smaller footprint for easier installation
Three-position tweeter switch for dialing in your highs
EVC™ (Extended Voice Coil) technology help deliver remarkable bass response
Titanium tweeter construction and neodymium magnets to reveal subtle details
UV-treated poly-foam surround assists with precise linear excursion
Phase plugs in the woofer cones eliminate any distortion
Steel mesh grilles protect your drivers
Three tweeter mounting options including flush, angled and surface pods
Woofer Size | in [mm]6 1/2 [160]Tweeter Size | in [mm]3/4 [20]Dome MaterialTitaniumPeak Power (watts, per ANSI/CTA-2031-A)300Recommended Amplifier Power (watts RMS)100Effective Frequency Range | Hz35-21kWoofer Mounting Hole Diameter | in [mm]4 13/16 [123]
Woofer Bottom Mount Depth | in [mm]1 11/16 [43]Flush Mounting Tweeter Hole Diameter | in [mm]1 9/16 [40]Flush Mount Tweeter Depth | in [mm]9/16 [14.5]High Pass | dB, at Frequency | Hz12, 4000Low Pass | dB, at Frequency | Hz12, 4000High Frequency Output Attenuation | dB0, 3, & 6Bolt-Thru GrillesYesWarrantyWhen purchased from an Authorized KICKER Dealer or kicker.com, KICKER warrants this product to be free from defects in material and workmanship under normal use for a period of TWO (2) YEARS from date of original purchase.
The CS-Series 6-3/4-inch Component Speakers are built for awesome sound that plays as long as the ride takes you.
CS-Series components include titanium tweeters and two-way crossovers. Easily customize your sound with a smooth 12dB slope and three-position tweeter adjustment switch (0dB/+3dB/+6dB). The optimized footprint means great sound with hassle-free installation, no matter where you mount it!
Mount the tweeter with the flush, angled or surface-mount tweeter pods, for outstanding imaging and a sophisticated look.
These CS-Series speakers work best with 100 watts of recommended power. See below for more details.
Fits nearly every car made
12dB crossovers with a smaller footprint for easier installation
Three-position tweeter switch for dialing in your highs
EVC™ (Extended Voice Coil) technology help deliver remarkable bass response
Titanium tweeter construction and neodymium magnets to reveal subtle details
UV-treated poly-foam surround assists with precise linear excursion
Phase plugs in the woofer cones eliminate any distortion
Steel mesh grilles protect your drivers
Three tweeter mounting options including flush, angled and surface pods
Woofer Size | in [mm]6 3/4 [165]Tweeter Size | in [mm]3/4 [20]Dome MaterialTitaniumPeak Power (watts, per ANSI/CTA-2031-A)300Recommended Amplifier Power (watts RMS)100Effective Frequency Range | Hz35-21kWoofer Mounting Hole Diameter | in [mm]5 1/2 [140]
Woofer Bottom Mount Depth | in [mm]1 13/16 [47]Flush Mounting Tweeter Hole Diameter | in [mm]1 9/16 [40]Flush Mount Tweeter Depth | in [mm]9/16 [14.5]High Pass | dB, at Frequency | Hz12, 4000Low Pass | dB, at Frequency | Hz12, 4000High Frequency Output Attenuation | dB0, 3, & 6Bolt-Thru GrillesYesWarrantyWhen purchased from an Authorized KICKER Dealer or kicker.com, KICKER warrants this product to be free from defects in material and workmanship under normal use for a period of TWO (2) YEARS from date of original purchase.
CS-Series 6x8-inch Component Speakers are the perfect factory upgrade when you have a separate woofer and tweeter.
CS-Series components include separate titanium tweeters and two-way crossovers with tweeter level control to let you customize your sound for the best sonic quality. The result is precise control with stunning musical realism. Use the flush, angled or surface-mount tweeter pods to perfect your imaging with a sophisticated new look.
These CS-Series speakers work best with 75 watts of recommended power. See below for more details.
Fits nearly every car made
12dB crossovers with a smaller footprint for easier installation
Three-position tweeter switch for dialing in your highs
EVC™ (Extended Voice Coil) technology help deliver remarkable bass response
Titanium tweeter construction and neodymium magnets to reveal subtle details
UV-treated poly-foam surround assists with precise linear excursion
Phase plugs in the woofer cones eliminate any distortion
Steel mesh grilles protect your drivers
Three tweeter mounting options including flush, angled and surface pods
Woofer Size | in [mm]6x8 [160x200]Tweeter Size | in [mm]3/4 [20]Dome MaterialTitaniumPeak Power (watts, per ANSI/CTA-2031-A)225Recommended Amplifier Power (watts RMS)75Effective Frequency Range | Hz40-21kWoofer Mounting Hole Diameter | in [mm]5 x 7 3/16 [126x182]
Woofer Bottom Mount Depth | in [mm]2 3/16 [56]Flush Mounting Tweeter Hole Diameter | in [mm]1 9/16 [40]Flush Mount Tweeter Depth | in [mm]9/16 [14.5]High Pass | dB, at Frequency | Hz12, 4000Low Pass | dB, at Frequency | Hz12, 4000High Frequency Output Attenuation | dB0, 3, & 6Bolt-Thru GrillesNoWarrantyWhen purchased from an Authorized KICKER Dealer or kicker.com, KICKER warrants this product to be free from defects in material and workmanship under normal use for a period of TWO (2) YEARS from date of original purchase.
CS-Series 6x9-inch Component Speakers are built for awesome sound that plays as long as the ride takes you.
CS-Series components include titanium tweeters and two-way crossovers with a smooth 12dB slope and three-position tweeter adjustment switch (0dB/+3dB/+6dB), included in each external crossover. The optimized footprint means great sound with hassle-free installation, no matter where you mount it!
These CS speakers work best with 150 watts of recommended power. See below for more details.
Fits nearly every car made
12dB crossovers with a smaller footprint for easier installation
Three-position tweeter switch for dialing in your highs
EVC™ (Extended Voice Coil) technology help deliver remarkable bass response
Titanium tweeter construction and neodymium magnets to reveal subtle details
UV-treated poly-foam surround assists with precise linear excursion
Phase plugs in the woofer cones eliminate any distortion
Steel mesh grilles protect your drivers
Three tweeter mounting options including flush, angled and surface pods
Woofer Size | in [mm]6x9 [160x230]Tweeter Size | in [mm]3/4 [20]Dome MaterialTitaniumPeak Power (watts, per ANSI/CTA-2031-A)450Recommended Amplifier Power (watts RMS)150Effective Frequency Range | Hz30-21kWoofer Mounting Hole Diameter | in [mm]5 5/8 x 8 7/16 [143x215]
Woofer Bottom Mount Depth | in [mm]3 3/16 [81]Flush Mounting Tweeter Hole Diameter | in [mm]1 9/16 [40]Flush Mount Tweeter Depth | in [mm]9/16 [14.5]High Pass | dB, at Frequency | Hz12, 4000Low Pass | dB, at Frequency | Hz12, 4000High Frequency Output Attenuation | dB0, 3, & 6Bolt-Thru GrillesYesWarrantyWhen purchased from an Authorized KICKER Dealer or kicker.com, KICKER warrants this product to be free from defects in material and workmanship under normal use for a period of TWO (2) YEARS from date of original purchase.
CS-Series 6x9-inch 3-Way Speakers are the perfect way to upgrade your factory system.
CS-Series 3-Ways deliver remarkable performance and ultra-clean bass with a heavy-duty motor/magnet structure not found in stock speakers. A stamped-steel frame supports a rigid polypropylene cone with EVC™ (Extended Voice Coil) technology for the best sonic quality. Using zero-protrusion PEI tweeters with neodymium magnets, you get the clarity you need without interfering with factory grilles.
The rugged 6x9-inch, 3-way speaker is especially cool. With a massive 300-watt peak power rating, this triaxial driver gives you extraordinary volume, while the integrated 2-inch midrange driver and dedicated tweeter give you crisp, accurate details for the realism you crave.
These CS speakers work best with 150 watts of recommended power. See below for more details.
Fits nearly every car made
Zero-protrusion tweeters to fit nearly any factory depth
Woofer EVC™ (Extended Voice Coil) tech assists with precise linear excursion
UV-treated poly-foam surround resists heat or direct sunlight
Large woofer magnet in a heavy-duty motor for ultra-clean bass
Integrated 2-inch (50mm) midrange drivers gives detailed attention to mid frequencies
PEI-tweeter construction provides superb clarity
Neodymium tweeter magnets allow for increased volume in high frequencies
Steel mesh grilles included for speaker protection
Speaker Design3 - wayWoofer Size [ in, mm ]6x9, 160x230Mid Size | in [mm]2, 50Tweeter Size [ in, mm ]1/2, 13DC Resistance [ ohm ]3.5Peak Power [ watts, per ANSI/CTA-2031-A ]450Recommended Amplifier Power [ watts RMS ]150Sensitivity - SPLo [ dB @ 1W, 1m ]92Effective Frequency Range [ Hz ]30-20kMounting Hole Diameter [ in, mm ]5 5/8 x 8 7/16, 143x215
Top Mount Depth [ in, mm ]3 3/16, 81Bottom Mount Depth [ in, mm ]3 11/16, 93Tweeter Protrusion [ in, mm ]1/16, 1GrillesYesTweeter Magnet MaterialElectric Crystal MotorTweeter Dome MateriaPEI [polyether imideTweeter DesignBalanced domeWoofer Cone MaterialPolypropyleneWoofer Surround MaterialPolyester foamWarrantyWhen purchased from an Authorized KICKER Dealer or kicker.com, KICKER warrants this product to be free from defects in material and workmanship under normal use for a period of TWO (2) YEARS from date of original purchase.
CS-Series 6x8-inch Coaxial Speakers are the perfect way to upgrade your factory system.
CS-Series Coaxials deliver remarkable performance and ultra-clean bass with a heavy-duty motor/magnet structure not found in stock speakers. A stamped-steel frame supports a rigid polypropylene cone with EVC™ (Extended Voice Coil) technology for the best sonic quality. Using zero-protrusion PEI tweeters with neodymium magnets, you get the clarity you need without interfering with factory grilles.
These CS speakers work best with 75 watts of recommended power. See below for more details.
Fits nearly every car made
Zero-protrusion tweeters to fit nearly any factory depth
Woofer EVC™ (Extended Voice Coil) tech assists with precise linear excursion
UV-treated poly-foam surround resists heat or direct sunlight
Large woofer magnet in a heavy-duty motor for ultra-clean bass
PEI-tweeter construction provides superb clarity
Neodymium tweeter magnets allow for increased volume in high frequencies
CS-Series 6-3/4-inch Coaxial Speakers are the perfect way to upgrade your factory speakers.
CS-Series Coaxials deliver remarkable performance and ultra-clean bass with a heavy-duty motor/magnet structure not found in stock speakers. The stamped-steel framework supports a rigid polypropylene cone with EVC™ (Extended Voice Coil) technology for the best sonic quality. Using zero-protrusion PEI tweeters with neodymium magnets, you get the clarity you need without interfering with factory grilles.
These CS speakers work best with 100 watts of recommended power. See below for more details.
Fits nearly every car made
Zero-protrusion tweeters to fit nearly any factory depth
Woofer EVC™ (Extended Voice Coil) tech assists with precise linear excursion
UV-treated poly-foam surround resists heat or direct sunlight
Large woofer magnet in a heavy-duty motor for ultra-clean bass
PEI-tweeter construction provides superb clarity
Neodymium tweeter magnets allow for increased volume in high frequencies
Steel mesh grilles included for speaker protection
Speaker Design2 - wayWoofer Size [ in, mm ]6 3/4, 165Tweeter Size [ in, mm ]1/2, 13DC Resistance [ ohm ]3.3Peak Power [ watts, per ANSI/CTA-2031-A ]300Recommended Amplifier Power [ watts RMS ]100Sensitivity - SPLo [ dB @ 1W, 1m ]90Effective Frequency Range [ Hz ]40-20kMounting Hole Diameter [ in, mm ]5 1/2, 140
Top Mount Depth [ in, mm ]1 13/16, 47Bottom Mount Depth [ in, mm ]2 1/16, 51Tweeter Protrusion [ in, mm ]0GrillesYesTweeter Magnet MaterialNeodymiumTweeter Dome MateriaPEI [polyether imideTweeter DesignBalanced domeWoofer Cone MaterialPolypropyleneWoofer Surround MaterialPolyester foamWarrantyWhen purchased from an Authorized KICKER Dealer or kicker.com, KICKER warrants this product to be free from defects in material and workmanship under normal use for a period of TWO (2) YEARS from date of original purchase
CS-Series 6-1/2-inch Coaxial Speakers are the perfect way to upgrade your factory speakers.
CS-Series Coaxials deliver remarkable performance and ultra-clean bass with a heavy-duty motor/magnet structure not found in stock speakers. The stamped-steel framework supports a rigid polypropylene cone with EVC™ (Extended Voice Coil) technology for the best sonic quality. Using zero-protrusion PEI tweeters with neodymium magnets, you get the clarity you need without interfering with factory grilles.
These CS speakers work best with 100 watts of recommended power. See below for more details.
Fits nearly every car made
Zero-protrusion tweeters to fit nearly any factory depth
Woofer EVC™ (Extended Voice Coil) tech assists with precise linear excursion
UV-treated poly-foam surround resists heat or direct sunlight
Large woofer magnet in a heavy-duty motor for ultra-clean bass
PEI-tweeter construction provides superb clarity
Neodymium tweeter magnets allow for increased volume in high frequencies
Steel mesh grilles included for speaker protection
Speaker Design2 - wayWoofer Size [ in, mm ]6 1/2, 160Tweeter Size [ in, mm ]1/2, 13DC Resistance [ ohm ]3.3Peak Power [ watts, per ANSI/CTA-2031-A ]300Recommended Amplifier Power [ watts RMS ]100Sensitivity - SPLo [ dB @ 1W, 1m ]90Effective Frequency Range [ Hz ]40-20kMounting Hole Diameter [ in, mm ]4 13/16, 123
Top Mount Depth [ in, mm ]1 11/16, 43Bottom Mount Depth [ in, mm ]2 1/16, 52Tweeter Protrusion [ in, mm ]0GrillesYesTweeter Magnet MaterialNeodymiumTweeter Dome MateriaPEI [polyether imideTweeter DesignBalanced domeWoofer Cone MaterialPolypropyleneWoofer Surround MaterialPolyester foamWarrantyWhen purchased from an Authorized KICKER Dealer or kicker.com, KICKER warrants this product to be free from defects in material and workmanship under normal use for a period of TWO (2) YEARS from date of original purchase
CS-Series 5-1/4-Inch Coaxial Speakers are an excellent upgrade from factory speakers.
A significant upgrade from your factory sound, the stamped-steel framework supports a rigid polypropylene cone with EVC™ (Extended Voice Coil) technology for the best sonic quality. Using zero-protrusion PEI tweeters with neodymium magnets, you get the clarity you need without interfering with factory grilles.
These CS speakers work best with 75 watts of recommended power. See below for more details.
Fits nearly every car made
Zero-protrusion tweeters to fit nearly any factory depth
Woofer EVC™ (Extended Voice Coil) tech assists with precise linear excursion
UV-treated poly-foam surround resists heat or direct sunlight
Large woofer magnet in a heavy-duty motor for ultra-clean bass
PEI-tweeter construction provides superb clarity
Neodymium tweeter magnets allow for increased volume in high frequencies
Steel mesh grilles included for speaker protection
Speaker Design2 - wayWoofer Size [ in, mm ]5 1/4, 130Tweeter Size [ in, mm ]1/2, 13DC Resistance [ ohm ]3.4Peak Power [ watts, per ANSI/CTA-2031-A ]225Recommended Amplifier Power [ watts RMS ]75Sensitivity - SPLo [ dB @ 1W, 1m ]90Effective Frequency Range [ Hz ]45-20kMounting Hole Diameter [ in, mm ]4 1/2, 115
Top Mount Depth [ in, mm ]1 ¾, 45Bottom Mount Depth [ in, mm ]2 1/16, 52Tweeter Protrusion [ in, mm ]0GrillesYesTweeter Magnet MaterialNeodymiumTweeter Dome MateriaPEI [polyether imideTweeter DesignBalanced domeWoofer Cone MaterialPolypropyleneWoofer Surround MaterialPolyester foamWarrantyWhen purchased from an Authorized KICKER Dealer or kicker.com, KICKER warrants this product to be free from defects in material and workmanship under normal use for a period of TWO (2) YEARS from date of original purchase.
CS-Series 4x10-inch Coaxial Speakers give you the quality you want, with the factory fit you need.
The CS-Series design features near-zero tweeter protrusion, so your speakers fit perfectly behind factory grilles. This simple, drop-in solution delivers acclaimed KICKER performance with a stamped-steel framework, rigid polypropylene cone and EVC™ (Extended Voice Coil) technology. You get superb clarity, durability and volume – now and way down the road!
These CS speakers work best with 75 watts of recommended power. See below for more details.
Fits nearly every car made that requires 4x10s, especially older GM models
Zero-protrusion tweeters to fit nearly any factory depth
Woofer EVC™ (Extended Voice Coil) tech assists with precise linear excursion
UV-treated poly-foam surround resists heat or direct sunlight
Large woofer magnet in a heavy-duty motor for ultra-clean bass
PEI-tweeter construction provides superb clarity
Neodymium tweeter magnets allow for increased volume in high frequencies
Speaker Design2 - wayWoofer Size [ in, mm ]4x10 [100x250]Tweeter Size [ in, mm ]1/2 [13]DC Resistance [ ohm ]3.3Peak Power [ watts, per ANSI/CTA-2031-A ]225Recommended Amplifier Power [ watts RMS ]75Sensitivity - SPLo [ dB @ 1W, 1m ]88Effective Frequency Range [ Hz ]45-20kMounting Hole Diameter [ in, mm ]3-7/8 x 9-5/8, 90 x 238
Top Mount Depth [ in, mm ]2-3/8, 80Bottom Mount Depth [ in, mm ]2, 50Tweeter Protrusion [ in, mm ]0GrillesNoTweeter Magnet MaterialNeodymiumTweeter Dome MateriaPEI [polyether imideTweeter DesignBalanced domeWoofer Cone MaterialPolypropyleneWoofer Surround MaterialPolyester foamWarrantyWhen purchased from an Authorized KICKER Dealer or kicker.com, KICKER warrants this product to be free from defects in material and workmanship under normal use for a period of TWO (2) YEARS from date of original purchase
CS-Series 4x6-inch Coaxial Speakers give you the quality you want, with the factory fit you need.
The CS-Series design features near-zero tweeter protrusion, so your speakers fit perfectly behind factory grilles. This simple, drop-in solution delivers acclaimed KICKER performance with a stamped-steel framework, rigid polypropylene cone and EVC™ (Extended Voice Coil) technology. You get superb clarity, durability and volume – now and way down the road!
These CS speakers work best with 50 watts of recommended power. See below for more details.
Fits nearly every car made
Zero-protrusion tweeters to fit nearly any factory depth
Woofer EVC™ (Extended Voice Coil) tech assists with precise linear excursion
UV-treated poly-foam surround resists heat or direct sunlight
Large woofer magnet in a heavy-duty motor for ultra-clean bass
PEI-tweeter construction provides superb clarity
Neodymium tweeter magnets allow for increased volume in high frequencies
Speaker Design2 - wayWoofer Size [ in, mm ]4x6 [100x160]Tweeter Size [ in, mm ]1/2 [13]DC Resistance [ ohm ]3.3Peak Power [ watts, per ANSI/CTA-2031-A ]150Recommended Amplifier Power [ watts RMS ]50Sensitivity - SPLo [ dB @ 1W, 1m ]88Effective Frequency Range [ Hz ]50-20kMounting Hole Diameter [ in, mm ]4 x 6, 101x152
Top Mount Depth [ in, mm ]1 11/16, 43Bottom Mount Depth [ in, mm ]2, 50Tweeter Protrusion [ in, mm ]0GrillesNoTweeter Magnet MaterialNeodymiumTweeter Dome MateriaPEI [polyether imideTweeter DesignBalanced domeWoofer Cone MaterialPolypropyleneWoofer Surround MaterialPolyester foamWarrantyWhen purchased from an Authorized KICKER Dealer or kicker.com, KICKER warrants this product to be free from defects in material and workmanship under normal use for a period of TWO (2) YEARS from date of original purchase.
CS-Series 4-inch Coaxial Speakers deliver accuracy, durability and a factory fit!
These coaxial speakers are a significant upgrade in your sound. A stamped-steel framework supports a rigid polypropylene cone with EVC™ (Extended Voice Coil) technology for the best sonic quality. Using zero-protrusion PEI tweeters ensures you get every bit of clarity you need, without interfering with factory grilles.
These CS speakers work best with 50 watts of recommended power. See below for more details.
Fits nearly every car made
Zero-protrusion tweeters to fit nearly any factory depth
Woofer EVC™ (Extended Voice Coil) tech assists with precise linear excursion
UV-treated poly-foam surround resists heat or direct sunlight
Large woofer magnet in a heavy-duty motor for ultra-clean bass
PEI-tweeter construction provides superb clarity
Neodymium tweeter magnets allow for increased volume in high frequencies
Steel mesh grilles included for speaker protection
Speaker Design2 - wayWoofer Size [ in, mm ]4, 100Tweeter Size [ in, mm ]1/2, 13DC Resistance [ ohm ]3.5Peak Power [ watts, per ANSI/CTA-2031-A ]150Recommended Amplifier Power [ watts RMS ]50Sensitivity - SPLo [ dB @ 1W, 1m ]88Effective Frequency Range [ Hz ]60-20kMounting Hole Diameter [ in, mm ]3 3/4, 95
Top Mount Depth [ in, mm ]1 13/16, 46Bottom Mount Depth [ in, mm ]2 1/16, 52Tweeter Protrusion [ in, mm ]0GrillesYesTweeter Magnet MaterialNeodymiumTweeter Dome MateriaPEI [polyether imideTweeter DesignBalanced domeWoofer Cone MaterialPolypropyleneWoofer Surround MaterialPolyester foamWarrantyWhen purchased from an Authorized KICKER Dealer or kicker.com, KICKER warrants this product to be free from defects in material and workmanship under normal use for a period of TWO (2) YEARS from date of original purchase.
CS-Series 3-1/2 Inch Coaxial Speakers are built for clarity, volume and durability.
These coaxial speakers are a significant upgrade in your sound. A stamped-steel framework supports a rigid polypropylene cone and UV-treated foam surrounds that stand up to heat and direct sunlight, for years of outstanding audio quality.
These CS speakers work best with 30 watts of recommended power. See below for more details.
Fits nearly every car made
Zero-protrusion tweeters to fit nearly any factory depth
Woofer EVC™ (Extended Voice Coil) tech assists with precise linear excursion
UV-treated poly-foam surround resists heat or direct sunlight
Large woofer magnet in a heavy-duty motor for ultra-clean bass
PEI-tweeter construction provides superb clarity
Neodymium tweeter magnets allow for increased volume in high frequencies
Speaker Design2 - wayWoofer Size [ in, mm ]3 1/2, 89Tweeter Size [ in, mm ]1/2, 13DC Resistance [ ohm ]3.2Peak Power [ watts, per ANSI/CTA-2031-A ]90Recommended Amplifier Power [ watts RMS ]30Sensitivity - SPLo [ dB @ 1W, 1m ]88Effective Frequency Range [ Hz ]80-20kMounting Hole Diameter [ in, mm ]3 [78]
Top Mount Depth [ in, mm ]1 11/16, 42Bottom Mount Depth [ in, mm ]1 15/16, 48Tweeter Protrusion [ in, mm ]1/8 [3]GrillesNoTweeter Magnet MaterialNeodymiumTweeter Dome MateriaPEI [polyether imide]Tweeter DesignBalanced domeWoofer Cone MaterialPolypropyleneWoofer Surround MaterialPolyester foamWarrantyWhen purchased from an Authorized KICKER Dealer or kicker.com, KICKER warrants this product to be free from defects in material and workmanship under normal use for a period of TWO (2) YEARS from date of original purchase.
Now with RGB LED lighting standard, the weather-proof KM60 Coaxial Marine Speaker is purpose-made for great looks and superior sonic quality.
Features:
RGB LED Lighting Included
Spectacular Highs And Smooth, Impactful Midrange
Made Specifically For Marine With Sealed Motor And Polymer Basket
UV-Treated Polypropylene Woofer With Santoprene® Surround
Stainless Steel Hardware Included
White Grill And Basket Will Not Yellow Or Fade
ASTM Tested For UV And Salt/Fog Exposure
This KM 6.5-Inch Speaker works best with 50 watts of recommended power. See below for more details.
We don’t just say its "marine ready", we prove it! ASTM-tested for UV and salt/fog exposure, all KICKER Marine Speakers are designed specifically for boat audio and meets or exceeds the strictest standards in the industry.
UV treatments on the coaxials' injection-molded cones, Santoprene® surrounds, baskets and grilles help all models maintain in marine environments. These speakers can endure almost any weather conditions with splash-and-spray-resisting sealed motors, cones and locking terminal covers. Speaker hardware is forged from rustproof, 316L stainless-steel.
Spectacular highs and midrange sounds coupled with the simplest of speaker installations, provide full-range audio specifically for a marine environment.
Woofer (in,mm) 6-1/2, 165 Tweeter (in,mm) 1/2, 13 Tweeter Dome Material PEI Rated Impedance (Ω) 4 Peak Power (watts, per ANSI/CTA-2031-A) 150 Recommended Amplifier Power (watts RMS) 15-50
Sensitivity (1W,1m) 90 Frequency Response (Hz)35-21k Mounting Hole Diameter (in,mm) 5-3/16, 132
Mounting Template*
*For template to be accurate, ensure the print properties are set at 100% not scale to page.
Mounting Depth (in,mm) 2-1/2, 62 Grilles White Only Warranty When purchased from an Authorized KICKER Dealer or kicker.com, KICKER warrants this product to be free from defects in material and workmanship under normal use for a period of THREE (3) YEARS from date of original purchase.
Using all the protection that KICKER REAL MARINE® can provide, KM614FL Coaxial Speakers come with a streamlined grille design for a non-intrusive installation and more subtle look.
Features:
Sleek-Profile Grille Design
Comes with Two Sets of Grilles – an OE-style white pair and a silver pair with open-hole tweeters
Spectacular Highs and Smooth, Impactful Midrange
ASTM-Tested for UV and Salt/Fog Exposure
KICKER REAL MARINE® with Splash-and-Spray, Sealed Components and Rust-proof Hardware
Multi-Color RGB Lighting
Select Colors and Modes with the KICKER KMLC LED Remote Control (sold separately)
This KM 6.5-inch Speaker works best with 15-65 watts of recommended power. See below for more details.
Woofer( in,mm) 6-1/2, 165 Tweeter (in,mm) 1/2, 13 Tweeter Dome Material PEI Rated Impedance( Ω) 4 Peak Power (watts, per ANSI/CTA-2031-A) 130 Recommended Amplifier Power (watts RMS) 15-65
Sensitivity (1W,1m) 90 Frequency Response (Hz)35-21k Mounting Hole Diameter (in,mm)5-1/4, 132
Mounting Template*
*For template to be accurate, ensure the print properties are set at 100% not scale to page.
Mounting Depth (in,mm) 2-13/16, 64 Grilles 2 pair (OE-style white/silver with open tweeter) Warranty When purchased from an Authorized KICKER Dealer or kicker.com, KICKER warrants this product to be free from defects in material and workmanship under normal use for a period of THREE (3) YEARS from date of original purchase.
Loud and clear, the KM Coaxial Marine Speakers are built to pump out the tunes – and the fun - for years to come! Whether you mount your speakers in the hull or in KICKER® tower enclosures, you also get a pair of stout marine-grade grilles!
Our speakers are made to thrive in the water. UV treatments on injection-molded cones, Santoprene® surrounds, baskets and grilles all help maintain top-shelf performance. KM speakers will endure almost any weather conditions with splash-and-spray-resistant sealed motors, cones and Locking/Sealed Terminal Covers. Speaker hardware is forged from rustproof, 316L stainless-steel.
IP66 certification (protected from dust and water jets/splash)
Four-Ohm Voice Coil
One-Inch PEI Tweeter to Resist Corrosion
UV-Treated Polypropylene Woofer With Santoprene® Surround
UV-Resistant Polymer Basket
Locking/Sealed Terminal Cover
Sealed Motor Structure
316L Stainless Mounting Hardware Included
White and Charcoal Grilles With Seven-Color LED System Included*
Meets or Exceeds ASTM Standards for UV** and Salt/Fog Exposure***
*Upgradable to 20 Colors and 19 Lighting Modes with KMLC
**ASTM G154 400 hr. Accelerated UV Test
***ASTM B117 200 hr. Salt Fog Test
This KM Eight-Inch Coaxial Speaker works best with 150 watts of recommended power.
Woofer (in,mm)8,200 Tweeter (in,mm)1, 25 Tweeter Dome Material PEI Rated Impedance(Ω)4 Peak Power (watts, per ANSI/CTA-2031-A)300 Recommended Amplifier Power (watts RMS)150 Sensitivity(1W,1m)92 Frequency Response(Hz)30-21k
Mounting Hole Diameter (in,mm)6-9/16, 170
Mounting Template*
*For template to be accurate, ensure the print properties are set at 100% not scale to page.
Mounting Depth (in,mm)3-5/16, 82.9
LED Lighting:Yes
Grilles:Charcoal and White
What's in the Box:
2 - 8" 4Ω Coaxials
8 - Mounting Screws
8 - Mounting Screw Clips
2 - Wire Connection Cover
2 - Zip Ties
Warranty When purchased from an Authorized KICKER Dealer or kicker.com, KICKER warrants this product to be free from defects in material and workmanship under normal use for a period of THREE (3) YEARS from date of original purchase.
Loud and clear, the KM Coaxial Marine Speakers are built to pump out the tunes – and the fun - for years to come! Whether you mount your speakers in the hull or in KICKER® tower enclosures, you also get a pair of stout marine-grade grilles!
Our speakers are made to thrive in the water. UV treatments on injection-molded cones, Santoprene® surrounds, baskets and grilles all help maintain top-shelf performance. KM speakers will endure almost any weather conditions with splash-and-spray-resistant sealed motors, cones and Locking/Sealed Terminal Covers. Speaker hardware is forged from rustproof, 316L stainless-steel.
IP66 certification (protected from dust and water jets/splash)
Four-Ohm Voice Coil
3/4-Inch PEI Tweeter to Resist Corrosion
UV-Treated Polypropylene Woofer With Santoprene® Surround
UV-Resistant Polymer Basket
Locking/Sealed Terminal Cover
Sealed Motor Structure
316L Stainless Mounting Hardware Included
White and Charcoal Grilles With Seven-Color LED System Included*
Meets or Exceeds ASTM Standards for UV** and Salt/Fog Exposure***
*Upgradable to 20 Colors and 19 Lighting Modes with KMLC
**ASTM G154 400 hr. Accelerated UV Test
***ASTM B117 200 hr. Salt Fog Test
This KM 6.5-Inch Coaxial Speaker works best with 65 watts of recommended power.
Woofer (in,mm)6-1/2, 165 Tweeter (in,mm)3/4, 20 Tweeter Dome Material PEI Rated Impedance(Ω)4 Peak Power (watts, per ANSI/CTA-2031-A)195 Recommended Amplifier Power (watts RMS)65 Sensitivity(1W,1m)90 Frequency Response(Hz)35-21k
Mounting Hole Diameter(in,mm)5-1/16, 128
Mounting Template*
*For template to be accurate, ensure the print properties are set at 100% not scale to page.
Mounting Depth (in,mm)2-3/8, 59.9
LED Lighting:Yes
Grilles:Charcoal and White
What's in the Box:
2 - 6.5" 4Ω Coaxials
8 - Mounting Screws
8 - Mounting Screw Clips
2 - Wire Connection Cover
2 - Zip Ties
Warranty When purchased from an Authorized KICKER Dealer or kicker.com, KICKER warrants this product to be free from defects in material and workmanship under normal use for a period of THREE (3) YEARS from date of original purchase.
They’re loud. They’re clear. They’re nearly indestructible! The KM Coaxial Marine Speakers are built to pump out the tunes – and the fun - for years to come! Whether you mount your speakers in the hull or in KICKER® tower enclosures, you also get a pair of stout marine-grade grilles!
MARINE MARVELS
Our speakers are made to thrive in the water. UV treatments on injection-molded cones, Santoprene® surrounds, baskets and grilles all help maintain top-shelf performance. KM speakers will endure almost any weather conditions with splash-and-spray-resistant sealed motors, cones and Locking/Sealed Terminal Covers. Speaker hardware is forged from rustproof, 316L stainless-steel.
IP66 certification (protected from dust and water jets/splash)
Four-Ohm Voice Coil
3/4-Inch PEI Tweeter to Resist Corrosion
UV-Treated Polypropylene Woofer With Santoprene® Surround
UV-Resistant Polymer Basket
Locking/Sealed Terminal Cover
Sealed Motor Structure
316L Stainless Mounting Hardware Included
Charcoal and White Grilles Included
Meets or Exceeds ASTM Standards for UV* and Salt/Fog Exposure**
*ASTM G154 400 hr. Accelerated UV Test
**ASTM B117 200 hr. Salt Fog Test
This KM 6.5-Inch Coaxial Speaker works best with 65 watts of recommended power.
Specifications
Woofer (in,mm) 6-1/2, 165 Tweeter (in,mm) 3/4, 20 Tweeter Dome Material PEI Rated Impedance (Ω)4 Peak Power (watts, per ANSI/CTA-2031-A)195 Recommended Amplifier Power (watts RMS) 65Sensitivity (1W,1m)90 Frequency Response (Hz)35-21k
Mounting Hole Diameter (in,mm)5-1/16, 128 Mounting Depth (in,mm)2-3/8, 59.9
Mounting Template*
*For template to be accurate, ensure the print properties are set at 100% not scale to page.
LED Lighting: No
Grilles: Charcoal and White
What's in the Box:
2 - 6.5" 4Ω Coaxials
8 - Mounting Screws
8 - Mounting Screw Clips
2 - Wire Connection Cover
2 - Zip Ties
Warranty When purchased from an Authorized KICKER Dealer or kicker.com, KICKER warrants this product to be free from defects in material and workmanship under normal use for a period of THREE (3) YEARS from date of original purchase.
KICKER's legendary subwoofer technology continues to lead the way for clear-sounding, ground-pounding bass in a vehicle.
KICKER's legendary subwoofer technology continues to lead the way for clear-sounding, ground-pounding bass in a vehicle. It's incorporated into KICKER's latest bass machine, the brand's first compact powered subwoofer and an International Consumer Electronics Show (CES) Innovations award winner for design and engineering.
The KICKER Hideaway Compact Powered Subwoofer delivers surprising low frequency output from a remarkably small enclosure, setting a new standard in plug-and-play bass performance and convenience in a vehicle. At just over three inches high and nearly 14 inches long, the Hideaway combines a 150-watt amplifier and an 8-inch subwoofer to add thumping bass to any vehicle from the tightest locations. It also provides a quick-connect power plug and Velcro®-fastened nylon straps for secure installation and simple but fast removal.
KICKER Senior Vice President Charlie Schultz said, "Our president Steve Irby was intimately involved in the design process with the KICKER Research and Development team, and they nailed it with the Hideaway Powered Subwoofer."
"The output is amazing," said Irby during listening tests.
The quick-connect Molex® plug and harness entails power, signal and remote turn-on. The Hideaway comes with a remote bass control for fine-tuning bass levels, adjustable low-pass crossover, variable +6dB bass boost, phase-cancelling switch for max output and two automatic turn-on options. It also features high- and low-level inputs for integration with nearly any factory or aftermarket head unit.
If you have two mono amps or powered subwoofers, check out the DBRC Remote for controlling both from the same knob.
Subwoofer (in, cm)8, 20 RMS power (watts), 14.4V150 Frequency response (Hz)25-120 Crossover 12dB/octave low pass at 50-120Hz;
24dB/octave high pass at 25Hz Phase switch 0°/180° Input sensitivity:Low level - 125mV-5V
High level - 250mV-10V
KickEQ boost variable to +6dB @ 40Hz Remote bass included Box Depth (in, cm)13-7/8, 35.2 Box Height (in, cm)3-1/8, 7.94 Box Width (in, cm)9-3/8, 23.8 Weight (lbs, kg)9.4, 4.3 Wiring harness 17' power input/ 8' speaker-level input/ 2' ground/ 2' remote turn-on Warranty When purchased from an Authorized KICKER Dealer or kicker.com, KICKER warrants this product to be free from defects in material and workmanship under normal use for a period of TWO (2) YEARS from date of original purchase.
The Hideaway HS10 is a compact powered 10-inch subwoofer that delivers surprising low frequency impact in a tough, all-aluminum frame.
KICKER innovates once again, with FIT+™ (Fail-safe Integration Technology PLUS). Accepting input signals ranging from a mere 0.25 volt to as high as 40 volts (400 watts at 4Ω) and fully compatible with newer vehicles using start/stop systems, the HS10 works with almost any vehicle on the road today without the added expense of a line output converter.
The included remote control allows you to change the amount of bass without changing the radio volume, for the perfect mixture of bass in your music at any volume.
If you have two mono amps or powered subwoofers, check out the DBRC Remote for controlling both from the same knob.
The Hideaway comes with an adjustable low-pass crossover, variable +6dB bass boost, phase switch, and two auto turn-on options: DC-offset or signal sensing.
A mere two milimeters taller than its little brother the HS8, the HS10 delivers more power and a bigger impact in an all-aluminum frame.
The quick-connect Molex® plug and harness includes power, signal and remote turn-on. It also features high- and low-level inputs for integration with nearly any factory or aftermarket head unit, plus two automatic turn-on options for incredibly easy activation.
Subwoofer (in, cm)10, 25 RMS power (watts) 180 Frequency response (Hz)25-120 Crossover 12dB/octave Lowpass 50–120Hz;
24dB/octave Highpass @ 25Hz Phase switch 0°/180° Input sensitivity:Low level - 250mV-10V
High level - 1V-40V
KickEQ boost variable to +6dB @ 40Hz Remote bass included Box Depth (in, cm)14, 35.6 Box Height (in, cm)3-1/8, 8.1 Box Width (in, cm)9-7/8, 24.9 Weight (lbs, kg)11.4, 5.17 Wiring harness 17' power input/ 8' speaker-level input/ 2' ground/ 2' remote turn-on Warranty When purchased from an Authorized KICKER Dealer or kicker.com, KICKER warrants this product to be free from defects in material and workmanship under normal use for a period of TWO (2) YEARS from date of original purchase.
The Hideaway HS12 is a compact powered 12-inch subwoofer that delivers surprising low frequency impact in a tough, all-aluminum frame.
KICKER innovates once again, with FIT+™ (Fail-safe Integration Technology PLUS). Accepting input signals ranging from a mere 0.25 volt to as high as 40 volts (400 watts at 4Ω) and fully compatible with newer vehicles using start/stop systems, the HS12 works with almost any vehicle on the road today without the added expense of a line output converter.
The included remote control allows you to change the amount of bass without changing the radio volume, for the perfect mixture of bass in your music at any volume.
The Hideaway comes with an adjustable low-pass crossover, variable +6dB bass boost, phase switch, and two auto turn-on options: DC-offset or signal sensing.
The robust 12-inch powered enclosure delivers more power and a bigger impact than the 10-inch or 8-inch, and STILL fits under the seat.
For even more bass response and next-level audio, run two HS12s and control them both with the KICKER DBRC Dual-Amp Bass Remote!
Subwoofer (in, cm)12, 30 RMS power (watts) 230 Frequency response (Hz)25-120 Crossover 12dB/octave Lowpass 50–120Hz;
24dB/octave Highpass @ 25Hz Phase switch 0°/180° Input sensitivity:Low level - 250mV-10V
High level - 1V-40V
KickEQ boost variable to +6dB @ 40Hz Remote bass included Box Depth (in, cm)17-1/8, 43.5 Box Height (in, cm)3-1/2, 8.8 Box Width (in, cm)12-1/8, 30.8 Weight (lbs, kg)17.5, 7.92 Wiring harness 17' power input/ 8' speaker-level input/ 2' ground/ 2' remote turn-on Warranty When purchased from an Authorized KICKER Dealer or kicker.com, KICKER warrants this product to be free from defects in material and workmanship under normal use for a period of TWO (2) YEARS from date of original purchase.
The PTRTP combines an active, award-winning CompRT subwoofer, a passive reFLEX sub, and a power-matched, built-in amplifier for an efficient, pounding bass solution for your ride.
Compact, factory-tuned enclosure for tight locations to fit many trucks and SUVs
Two models available – 12-inch sub with 500-watt amp, or a 10-inch sub with 400-watt amp
Amp is built-in and power-matched for hard-hitting bass
Easily integrates with factory system
Down-firing for ultimate driver protection
Thick, tough internal bracing to resist stacking weight
Active CompRT Sub matched with passive reFLEX™ sub for extra output
Remote bass control included
Start/Stop-System Compatible
Product Dimension Sheet 51PTRTP12 Dimensions TYPE powered down-fire WOOFER SIZE (in, cm)12, 30 RMS POWER (watts at 14.4v) 500PHASE SWITCH 0-180° FREQUENCY RESPONSE (Hz) 25-120 S-TO-N RATIO (A-weighted, re: rated power)>90dB INPUT SENSITIVITY Low Level – 125mV-5V; High Level – 1V-40V
CROSSOVER active 12dB/octave, variable 50-120Hz low pass; 12dB/octave, high pass at 25Hz BOX HEIGHT (in, cm)7-1/2, 19.2 BOX DEPTH (in, cm)14-5/8, 37 BOX WIDTH (in, cm)27-1/2, 70 Warranty When purchased from an Authorized KICKER Dealer or kicker.com, KICKER warrants this product to be free from defects in material and workmanship under normal use for a period of TWO (2) YEARS from date of original purchase.
If you have two mono amps or powered subwoofers, check out the DBRC Remote for controlling both from the same knob.
No results match your search. Try removing a few filters.