If you need to quickly add bass to a system or want to alleviate the hassle of separate amplifiers and subwoofers, then the P300-12 is the right one for the job! The P300-12 features a Punch 12” subwoofer in a custom sealed enclosure and is powered by a mighty 300 Watt amplifier. The system is all-inclusive, so you only need to run power, ground and a signal from the source to get this baby moving. Features a durable exterior that resists scrapes and bumps while in the trunk or cargo area.
"Closed-loop" design ensures optimum performance between woofer, amplifier and enclosure
Built-in 0°/180° phase switch
Separate low level and speaker level inputs
Built-in adjustable bass boost EQ
Adjustable 12db/Octave low pass crossover
Detachable Power/Ground connector
High-efficiency, low current design
Thermal and over/under voltage protection
Intelligent auto turn on/off function
Remote bass level control included
Proprietary high output woofer
Constructed with 5/8" MDF
Large AWG input terminals
Covered with industrial heat activated vinyl
1 Year Warranty
Dimensions
Box (H x W x D)
Wedge (H x W x D1 x D2)
15 x 19.8 x D1 11 - D2 7 (in)
38.1 x 50.29 x D1 27.94 - D2 17.78 (cm)
If you need to quickly add bass to a system or want to alleviate the hassle of separate amplifiers and subwoofers, then the P300-10 is the right one for the job! The P300-10 features a Punch 10” subwoofer in a custom sealed enclosure and is powered by a mighty 300 Watt amplifier. The system is all-inclusive, so you only need to run power, ground and a signal from the source to get this baby moving. Features a durable exterior that resists scrapes and bumps while in the trunk or cargo area.
"Closed-loop" design ensures optimum performance between woofer, amplifier and enclosure
Built-in 0°/180° phase switch
Separate low level and speaker level inputs
Built-in adjustable bass boost EQ
Adjustable 12db/Octave low pass crossover
Detachable Power/Ground connector
High-efficiency, low current design
Thermal and over/under voltage protection
Intelligent auto turn on/off function
Remote bass level control included
Proprietary high output woofer
Constructed with 5/8" MDF
Large AWG input terminals
Covered with industrial heat activated vinyl
1 Year Warranty
Dimensions
Box (H x W x D)
Wedge (H x W x D1 x D2)
13.3 x 18 x D1 8.9 - D2 5.9 (in)
33.7 x 45.72 x D1 22.6 - D2 14.98 (cm)
The Punch 300-8P is a self-contained subwoofer enclosure with built-in amplifier. This "all in one" solution is great for systems that need extra Punch on the low-end of the frequency spectrum. The 8" high output subwoofer is impedance optimized for the built in 300-watt class-D amplifier that features a low-pass crossover, bass EQ and phase switch. The enclosure can be connected via speaker level inputs for connection to factory systems, or traditional line level inputs for aftermarket systems. It also features an intelligent auto turn-on/off circuit that eliminates the need for a separate turn-on wire. The enclosure itself is precision designed and constructed using MDF (Medium Density Fiberboard) for the best acoustical properties and covered with heat activated vinyl finish to resist marks.
High-Efficiency, Low Current Amplifier Design
Optimized 8" Low Impedance Woofer
On Board Phase Switch
300 Watt Class-D Amplifier with Optimized "Closed Loop" Design
Adjustable 12db/Octave low pass crossover
Intelligent auto turn on/off function
Quick Input Connections for Easy Removal
On Board Adjustable Bass EQ
Robust Power/Ground connections
Remote bass level control included
Precision Constructed MDF Enclosure with Heat Activated Vinyl Finish
Separate low level and speaker level inputs
Thermal and over/under voltage protection
Slim Design For Truck Applications
1 Year Warranty
Dimensions
Box H x W x D
Wedge H x W x D1 x D2
11.4" x 17.6" x 5.6"
289 mm x 448 mm 141 mm
No results match your search. Try removing a few filters.
